• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.32-38
• /
• 2005

Two No Spin Differential(NSD) models were benchmarked for a project of Dual-Use Technology The Axiomatic approach was utilized to evaluate two models and to derive an evolutionary design from the evaluated results. Test methodology is developed and used to evaluate the mobility, steerability, durability and noise of the newly developed sample. The test results of NSD sample on the test methodology are very positive regarding functional performances.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2013

We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.1144-1147
• /
• 2000

본 논문에서는 정형 명세 도구인 Spin을 이용한 근사 정렬된 우선 순위 큐 스케줄러 알고리즘에 대한 정형 명세 방법론을 제시하였다. 최근에 제안된 패킷 스케줄링 알고리즘은 우선 순위(마감 순위, 가상 종료 시간, 시간 스템프 등)에 따라 QoS를 지원한다. 그러나 QoS를 지원하기 위한 우선 순위를 유지하는데는 많은 오버 헤드가 요구된다. 따라서 근사된 우선 순위 큐 스케줄러 알고리즘은 낮은 계산상의 오버 헤드를 통해 근사된 우선 순위 큐를 유지함으로서 정확한 우선 순위 큐를 유지하기 위한 오버 헤드와의 trade off를 고려한다. 큐는 주기적으로 회전을 하며 최소한의 포인터 오퍼레이션을 통해 근사된 우선 순위 큐를 유지한다. 이러한 스케줄러 알고리즘의 동작 과정을 정형 기법을 이용하여 패킷 스케줄링상에 기아 현상등이나 데드락 현상등의 발생여부를 검증하는 방법등의 연구가 전무한 상태이다. 정형 명세 도구인 Spin을 이용하여 제안된 알고리즘을 명세하는 방법론을 기술한다.

• Journal of Magnetics
• /
• v.7 no.4
• /
• pp.147-150
• /
• 2002

The pinning direction, the spin flop behaviors and the magnetoresistive properties in top synthetic spin valve structure [NiFe/CoFe/Cu/CoFe (t$_{p2}$)/Ru/CoFe (t$_{p1}$)/IrMn] were investigated. The magnetoresistive and pinning characteristics of synthetic spin valves strongly depended on the differences in the two pinning layer thickness, ${\Delta}t(=t_{p2}-t_{p1})$. In contrast to the conventional spin valves, the pinning direction (P1) was canted off with respect to the growth field axis with ${\Delta}t$. We found that the canting angle ${\Phi}$ had different values according to the annealing field direction and ${\Delta}t$. When the samples were annealed at above the blocking temperature of IrMn with zero fields, the canted pinned layer could be set along the growth field axis. Because the easy axis which was induced by the growth field during deposition is still active in all ferromagnetic layers except the IrMn at $250{^{\circ}C}$, the pinning direction could be aligned along the growth field axis, even in 0 field annealing.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.281-282
• /
• 2002

To reduce the spin-off of lubricants on a magnetic disk, which is caused by the radial component of shear force between the disk and air, we analyzed the air-velocity distribution and the air-shear force by three-dimensional large-eddy simulation (LES). This sensitivity analysis, on five design parameters, showed that disk/arm clearance and arm thickness have a greater effect on the mean radial air-shear force than the other parameters. The force on a disk optimized according to the optimum parameters is 12% less than the force on a conventional disk.

• Tribology and Lubricants
• /
• v.16 no.6
• /
• pp.415-424
• /
• 2000

The use of magnetoresistive (MR) head requires much tighter control of particle contamination in a drive since loose particles on the disk surface will generate thermal asperities (TA). In this study, a spinoff test was performed to investigate the adhesion and removal capability of a particle to disk surface. Numerical simulation was also performed to investigate dominant factor of particle detachment and to support experimental results. It was shown that particles are detached from the disk surface by the moment derived from the centrifugal force and the drag force and that the centrifugal force and capillary force are the dominant force, which determines spin-off of a particle on the disk surface. Removal of particles smaller than several micrometers, which are the main source of TA generation, is extremely difficult since the adhesion forces exceed the centrifugal force. Lubricant types and manufacturing process also influence the particle removal. Lower bonding ratio and lower viscosity of the lubricant will help to increase the removal rate of the particles from the disk surface.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.3-7
• /
• 2005

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling and lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor. Cutting fluid's aerosol via atomization process can generate human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol of which particle size less than 10 micron appears near working zone under typical operation conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided as a basis of environmental impact analysis for environmental consciousness.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.50-57
• /
• 2003

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling, Lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor Cutting fluid's aerosol via atomization process can be affected human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near working tone under typical operational conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided a basis of environmental impact analysis fur environmental consciousness.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.1
• /
• pp.60-73
• /
• 2003

There are many studies on spin-offs from college, but there is little concern on start-ups, which are set up by college and operated by professors. We call this type of start-up as college start-up. We check the problems and solutions of this type of start-ups. We propose three factors for success; prior checking of profitability of the business, preparation of relevant school policies and profit sharing with school and professors participated.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.97-102
• /
• 1997

Off-track capability is used to determine the track pitch of hard disk drive system, and the off-track capability as a function of track pitch is called 747 curve. In this paper, 747 curves were simulated with computer. Side reading and recording parameters were obtained by magnetic field analysis using 3-D finite element method. Head read signal and noise voltages for calculation of signal to noise ratio (SNR) were obtained using reciprocity theorem. According to the 747 curves thus obtained, the off-track capability was increased as erase band width increased and as effective signal to noise ration $(SNR_{eff}}$ decreased. A simulated 747 curve and a measured 747 curve (using spin stand) of a planar silicon head with track width of 4.1 um were very similar, which indicated that the simulation was carried out properly.