• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.23-24
• /
• 2006

Magnetic and magneto-optical properties of regioregular (>99%) poly(3-dodecylthiopenes are investigated. Faraday rotation of spin-coated films show extremely large Verdet constants, falling strongly with decreasing regioregularity. EPR spectroscopy at room temperature shows the presence of about 1 spin/190 monomers, indicative of delocalisation beyond a single polymer chain. SQUID measurements on the polymer give an effective magnetic moment of about 48900 mB, corrsponding to a S-value of 25.000. The Weiss-constant is 1.33 K indicating ferromagnetic coupling. Our experimental results show that organic polymer magnets can be prepared. Large MO effects allow the use of these materials in all-organic MO-sensors and devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.113-116
• /
• 2008

The active layer thickness and curing condition dependent performance of an organic thin film transistor (OTFT) with inkjetted organic semiconductor (OSC) layer is studied The best performance of the OTFT was found when the thickness of ose was ~120 nm cured at $60^{\circ}C$. The performance enhancement of the OTFT with inkjetted OSC layer was discussed by comparing the OTFT with spin-coated ose layer.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.313-318
• /
• 2001

The present study relates to a method of manufacturing 100$\mu\textrm{m}$ thick cover layer for the high density digital versatile disc system (HD-DVD), which uses a high numerical aperture of 0.85 at 405 nm wavelength. Spin coating technique was investigated as means for manufacturing the cover layer within sufficient margins of thickness variation and with good mechanical properties including small radial and tangential tilts. The influence of processing variables such as spinning speed, spinning time, and dispensing position was investigated. The effect of viscosity of UV-curable resin was also investigated.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.315-315
• /
• 2006

A variable surface coating with the potential to fulfill the requirements of industry will be presented. Via controlled radical polymerization methods from a functionalized Polymethylsilsesquioxane delivers an inorganic-organic block copolymer, which can be easily modified and tuned for different applications. Spin coated or dip coated on various substrates show promising results. By using different block copolymers the contact angle on a silicon wafer can be varied in a range of $90^{\circ}\;up\;to\;145^{\circ}$ After curing and complete condensation a perfect adhesion on glasses, plastics and metals is achieved.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.609-611
• /
• 1995

In this study, we experimented the properties of SOG film as sacrificials layers in surface micromachining and made $SiO_2$ films through spin, bake, cure process. When we culled SOG films once, SOG film thickness is 1000 $\sim$ 3000 ${\AA}$. Then we coaled 200-${\AA}$ SOG film on 9000 ${\AA}$-CVD oxide and then we fabricated test structure, cantilever and ring/beam structure. We estimated deformed structure by SEM. As the results, The deformation of the structure layer in the SOG-coated sacrificial layers is small compared with that or the structure layer on CVD oxide or PSG. In the future, we use multi coated SOG films, SOG film become adequate material as sacrificial layer.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.792-795
• /
• 1988

Titanium dioxide antireflection (AR) Coating, which is deposited on Si substrates using an organotitanium solution by the spinning technique, has been studied. The coated films on Si substrates were subsequently heated to $450^{\circ}C$. The thickness and index of refraction of films were varied continuousely from $740{\AA}$ to $1380{\AA}$ and from 1.7 to 2.1 respectively as a function of heat treatment temperature and time. Silicon solar cells AR-coated by the spinning technique showed as much as 31% improvement in conversion efficiency over the uncoated cell.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.83-86
• /
• 1998

Ferroelectric PZT(40/67)/PZT(60/40)heterolayered thin films were Prepared by the alkoxide-based Sol-Gel method. PZT(40/60) and PZT(60/40) stock solutions were made and spin-coated on the P7Ti/Si02/Si substrate alternately. These PZT(40/60) and PZT(60/40) films were dried at 300$^{\circ}C$ for 30min to remove organic materials and were sintered at 650$^{\circ}C$ for 1 hour to crystalize into a perovskite structure. The coating and heating procedure were repeated 6 times to form heterolayered films. Increasing the number of coating, coercive field was decreased. The relative dielectric constant, loss, remanent polarization and coercive field of the 4-coated PZT heterolayered were 1200, 4.1[%], 30.794[${\mu}$C/㎡] and 147.22[kV/cm], respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.319-324
• /
• 2002

We will report the latest developments in light emitting polymer (LEP) systems developed at CDT. Device performance for spin coated and ink jet printed systems will be described which are state-of-the-art. We will also report on novel driving schemes for both active and passive addressed LEP displays. These drive schemes extend system lifetime as well as lowering power consumption.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2755-2756
• /
• 2010

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.35-36
• /
• 2006

The influence of the concentration of precursor solution and the number of solution coatings on the densification of the Pb($Zr_xTi_{1-x}$)$O_3$(PZT) thick films was studied. PZT powder and PZT precursor solution were prepared by sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The powder and solution of composition were PZT(70/30) and PZT(30/70), respectively. The coating and drying procedure was repeated 4 times. And then the PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 to 2.0 mol/L[M] and the number of coating was repeated from 0 to 6. The relative dielectric constant of the PZT thick film was increased with increasing the number of solution coatings and the thick films with 15M, 6-time coated showed the 698. The remanent polarization of the 1.5M, 6-time coated PZT thick films was 38.3 ${\mu}C/cm^2$.