• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.95-99
• /
• 1996

The form accuracy of parts has become an important parameter. Therefore dimensional tolerance and geometric tolerance are used in design to satisfy required quility and functions of parts. But the informations for machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among these parameters. Finally, a methodology is proposed for getting the optimal grinding condition for precision workpiece The results are as follows; The effects of work speed and depth of cut on workpiece shape are ignorable compared to the effect of traverse speed. These is the optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing when the traverse speed is increased.

• KIEE International Transactions on Power Engineering
• /
• 제4A권2호
• /
• pp.51-57
• /
• 2004

This paper describes the dynamic performance of a variable speed wind turbine system responding to a wide variety of wind variations. Modeling of the wind generation using power electronics interface is proposed for dynamic simulation analysis. Component models and equations are addressed and their incorporations into a transient analysis program, PSCAD/EMTDC are provided. A wind model of four components is described, which enables observing dynamic behaviors of the wind turbine resulting from wind variations. Controllable power inverter strategies are intended for capturing the maximum power under variable speed operation and maintaining reactive power generation at a pre-determined level for constant power factor control or voltage regulation control. The components and control schemes are modeled by user-defined functions. Simulation case studies provide variable speed wind generator dynamic performance for changes in wind speed

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.67-74
• /
• 2009

This paper describes the speed control functions of the typical steam turbine speed controllers and the test results of generator load rejection simulations. The goal of the test is to verify the speed controller's ability to limit the steam turbine's peak speed within a predetermined level in the event of generator load loss. During normal operations, the balance between the driving force of the steam turbine and the braking force of the generator load is maintained and the speed of the turbine-generator is constant. Upon the generator's load loss, in other word, the load rejection, the turbine speed would rapidly increase up to the peak speed at a fast acceleration rate. It is required that the speed controller has the ability to limit the peak speed below the overspeed trip point, which is typically 110[%] of rated speed. If an actual load rejection occurs, a substantial amount of stresses will be applied to the turbine as well as other equipments, In order to avoid this unwanted situation, not an actual test but the other method is necessary. We are currently developing the turbine control system for another nuclear power plant and have plan to do the simulation suggested in this paper.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.30-34
• /
• 2015

This study examined the Korean drivers' acceptance of SAS(Speed Assistance systems) and traffic sign conditions in Korea roads for SLIF(Speed Limit Information Function) that is a part of SAS. Exceeding the speed limit is a factor in the severity of many road accidents and SAS would help the driver to observe a speed limit by warning and/or effectively limiting the speed of the vehicle. SAS are in the initial phase in Korea, Korean drivers could not be familiar with automatical speed limiting during driving, SAS interface design would be considered to be more readily acceptable to the public. And advanced SAS have been introduced onto the market which are able to inform the driver of the current speed limit based on camera and/or digital maps based SLIF. These systems are based on external data using sensors, so environmental conditions are an important factor which could cause malfunction of SLIF functions.

• 한국지능시스템학회논문지
• /
• 제25권4호
• /
• pp.405-411
• /
• 2015

본 논문은 회전 동력을 직접 바퀴에 전달하는 휠-인 직구동 모터를 제어 대상으로 하여 속도 계측 및 제어시스템을 설계하는 방법에 대한 논문이다. 지능 제어기로서 16비트급 모션제어 전용의 dsPIC30F2010 마이크로프로세서를 사용한다. 프로세서의 여러 기능 중 내부의 최소 기능인 시스템 클럭, PWM, I/O, Timer 및 통신만을 사용하였고, 홀 신호 계측 및 제어 소프트웨어 기능에 대한 동작 특성을 시험하였다. 또한 이러한 기능을 이용하여 PDFF 속도제어 프로그램을 구현하고, 그 실험 결과를 보인다.

• 센서학회지
• /
• 제8권1호
• /
• pp.45-52
• /
• 1999

이 논문에서는 오차 역전파 학습 알고리듬의 학습 속도를 향상시키기 위한 새로운 학습 방법을 제안한다. 제안하고자 하는 방법은 시그모이드 형태를 갖는 신경회로망의 활성화 함수(activation function) 자체에 고차항(higher order)을 적절히 이용하여 초기 학습 단계에서 발생할 수 있는 조기 포화(premature saturation) 현상을 계산량의 큰 증가 없이 효과적으로 대처할 수 있다. 고차항을 이용함으로써 은닉층 활성화 함수의 도합수가 작은 값으로 감소함에 따라 신경망의 연결 강도를 학습시키는 학습율은 적응적으로 큰 값을 갖게 된다. 또한, 은닉층에 고차항을 이용하는 제안한 방법에 모멘텀(momentum) 학습 알고리듬을 결합하는 새로운 hybrid 학습 방법을 제안한다. 컴퓨터 모의 실험을 통해 제안하고자 하는 학습 방법과 기존의 방법들과의 학습 속도 성능을 비교한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.799-802
• /
• 2002

Continuously variable transmission(CVT) mechanisms considered here combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit(CVU). As combining the functions of a K-H-V type differential gear unit and a V-belt type CVU, 24 different mechanisms are presented. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed. These mechanisms have many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range, and the generation of geared neutral.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.72-77
• /
• 2001

The computational efficiency of an shape optimization procedure is highly dependent upon the proper selection of shape representation methods and design variables. In this study, shape functions, Bezier and NURBS(non-uniform rational B-splines) curves are selected as configuration generation methods and their efficiencies on the nose shape design of high-speed air vehicles, are compared. The effects of the number of control points, weighting factors and the optimization methods when utilizing the NURBS curves, are investigated. By implementing Bezier and NURBS curves, shapes having lower drag than the optimization case utilizing the shape functions, were obtained, hence it was demonstrated that these curves have better capability in representing the configuration. Efforts will be given to improve the convergence behavior when utilizing the NURBS, hence to reduce the number of Navier-Stokes analysis calculations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.35.1-40
• /
• 2001

This study is on the behavior analysis which can define and verify a system requirement through a behavior diagram for High speed rail system. The model considered in this study is limited to the preconditioning control of the control system specification for HSRS. To build an executable model, requirements should be decomposed first into leaf node requirements. The behavior model is composed of input, output, and functions which are linked with leaf node requirements. It is important that a single requirement must specify a single Auction. Using the developed executable model and the traceability between requirements and functions, this study found out a lot of static and dynamic inconsistency, missed and derived requirements. This is to develop and executable behavior model to do functional analysis and be able to verify the integrity of a specification.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.199-208
• /
• 2003

Continuously variable transmission (CVT) mechanisms considered here combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit (CVU). As combining the functions of a K-H-V type differential gear unit and a V-belt type CVU, 24 different mechanisms are presented. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed. These mechanisms have many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range, and the generation of geared neutral.