• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.523-529
• /
• 2020

Power distribution management system is essential for the efficient management and operation of power distribution networks. The power distribution system is a system that manages the distribution network based on IT, and has been evolving along with the development of the power industry. The current power distribution system is designed to operate at a relatively low network transmission speed based on the independent operation of the main equipment. However, due to distributed resources such as photovoltaic or energy storage devices, which are rapidly increasing in popularity in recent years, the operation of future distribution environments is becoming more complex, and various information needs to be collected in real time. In this study, the requirements of the next-generation power distribution system were derived to overcome the limitations of the existing power distribution system, and based on this, the communication network system and performance requirements for the distribution system were defined. In order to verify the performance of the designed system, a software-based terminal device simulator was developed because it takes excessive time and cost to introduce a large-scale system such as a power distribution system. Using the simulator, a test environment similar to the actual operation was established, and the number of terminal devices was increased up to 1,000. The proposed system was shown to satisfy the requirements to support the functions of the next-generation power distribution system, recording less than 10 % of the communication network bandwidth.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.561-566
• /
• 2021

Schools are highly feared to spread widely in the event of an infectious disease, and systematic management and prompt response are needed as it can undermine students' health and learning rights. This study was conducted to identify the current status of infectious diseases common to elementary, middle and high school students and to provide basic data to protect students and faculty from the threat of infectious diseases and maintain normal school functions. Sejong City was selected for investigation. The three major infectious diseases are influenza, chickenpox and aquarium, all of which are classified as acute viral infectious diseases and have fast propagation speed and strong propagation power, which can have fatal consequences for students living in groups. The research data were analyzed using the 2019 infectious disease report data from the Education Ministry's Education Administration Information Network (NEIS), and the current status data reported by elementary, middle and high schools nationwide were analyzed. The research method was to compare the current status of infectious diseases across the country and Sejong City, compare the status of issuance by each school level, compare the status of infectious diseases by item, and analyze the status of infectious diseases by time. The results of the survey on the status of the three major infectious diseases are expected to be used as basic data for managing infectious diseases not only in Sejong City but also in the nation, so that they can be used to establish measures to manage student infectious diseases in the future.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.147-161
• /
• 2021

Through photogrammetry techniques, what current researches can achieve at present is rough 3D mesh and color map of objects, rather than usable photo-realistic 3D assets. This research aims to propose a new method to create photo-realistic 3D assets that can be used in the field of visualization applications. The new method combines photogrammetry with computer graphics modeling. Through the description of the production process of three objects in the real world - "Bullet Box", "Gun" and "Metal Beverage Bottle," it introduces in details the concept, functions, operating skills and software packages used in the steps including the photograph object, white balance, reconstruction, cleanup reconstruction, retopology, UV unwrapping, projection, texture baking, De-Lighting and Create Material Maps. In order to increase the flexibility of the method, alternatives to the software packages are also recommended for each step. In this research, 3D assets are produced that are accurate in shape, correct in color, easy to render and can be physically interacted with dynamic lighting in texture. The new method can obtain more realistic visual effects at a faster speed. It does not require large-scale teams, expensive equipment and software packages, therefore it is suitable for small studios and independent artists and educational institutions.

• Journal of Industrial Convergence
• /
• v.20 no.4
• /
• pp.23-30
• /
• 2022

Recently, with the development of artificial intelligence (AI) and deep learning, the importance of conversational artificial intelligence chatbots is being highlighted. In addition, chatbot research is being conducted in various fields. To build a chatbot, it is developed using an open source platform or a commercial platform for ease of development. These chatbot platforms mainly use RNN and application algorithms. The RNN algorithm has the advantages of fast learning speed, ease of monitoring and verification, and good inference performance. In this paper, a method for improving the inference performance of RNNs and applied algorithms was studied. The proposed method used the word group expansion learning technique of key words for each sentence when RNN and applied algorithm were applied. As a result of this study, the RNN, GRU, and LSTM three algorithms with a cyclic structure achieved a minimum of 0.37% and a maximum of 1.25% inference performance improvement. The research results obtained through this study can accelerate the adoption of artificial intelligence chatbots in related industries. In addition, it can contribute to utilizing various RNN application algorithms. In future research, it will be necessary to study the effect of various activation functions on the performance improvement of artificial neural network algorithms.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.129-140
• /
• 2021

The next generation mBcN should be built to cooperate with the wireless network to support hyper-speed and hyper-connectivity. In this paper, we propose a network architecture for the cooperation mBcN and 5G commercial network and architecture of the cooperative security gateway required for the cooperation. The proposed cooperative security gateway is between gNB and UPF to support LBO, SFC, and security. Our analysis shows that the proposed architecture has several advantages. First of all, user equipment connected with the mBcN can be easily connected through the 5G commercial radio network to the mBcN. Second, the military application traffic can be transmitted to mBcN without going through the 5G core network, reducing the end-to-end transmission delay without causing the traffic load on the 5G core network. In addition, the security level of the military application can effectively be maintained because the user equipment can be connected to the cooperative security gateway, and the traffic generated by the user equipment is transmitted to the mBcN without going through the 5G core network. Finally, we demonstrate that LBO, SFC, and security modules are essential functions of the proposed gateway in the 5G test-bed environment.

• KNOM Review
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2021

With the spread of the Internet, users can easily receive various services and exchange information through the web. There are several requirements for building a web system, and it must be developed using a programming language or platform for user purposes. Residual material information refers to information on medicines and pesticides added to food, and residual material standards are used to measure the level of residues in food produced by companies and farmers to determine whether those levels meet domestic or international standards. Currently, the Ministry of Food and Drug Safety provides residual acceptance standards for food additives, including food, pesticides and animal medicines, in the form of documents, which must be serviced smoothly and conveniently by users through the establishment of a web system. It must also meet a variety of requirements, including user accessibility, such as scalability and compatibility. This paper proposes react-based residual material information web system that allows users to access more conveniently and receive residual material information smoothly. We measured the speed for the three inportant functions of information provision and compared them with existing residual material information web systems and qualitatively evaluated the seven essential requirements: scalability, compatibility, and accessibility.

• The Mathematical Education
• /
• v.61 no.3
• /
• pp.419-439
• /
• 2022

This study is based on Freudenthal's mathmatising process and the didactical phenomenology of linear function concept, I have described and examined the process in which students represent the constant rate of change into tables, graphs and equations and, in this way, how they construct mental objects and essence of the linear function concept. The students used the proportionality as composite units, when they represented the phenomenon with constant rate of change into tables. When representing in graphs, all but one student represented it into a line. There were differences among the students in the level they were using the given conditions, co-variation perspective, and corresponding rules when formulating equations. The students compared the relationship between two variables in a multiplicative way, and under the guidance of teachers they reached to the understanding that its relationship becomes a constant. Moreover, they could construct mental objects of a constant rate of change, understanding the situation where the relationship between time difference and distance difference becomes one value, namely speed. The students had difficulties in connecting the rate of change with the inclination of a line. The students constructed the essence (concept) of linear functions, after building and organizing the image that the rate of change is constant, the graph is linear, and the equation is formulated as y=ax+b (a: inclination, b: intercept).

• Analyses & Alternatives
• /
• v.7 no.2
• /
• pp.35-77
• /
• 2023

This study aims to solve the entangled loop between demographic transition (DT) and economic growth by analyzing cross-country data. We undertake a national-level group analysis to verify the compressed transition of demographic variables over time. Assuming that the LA (latecomer advantage) on DT over time exists, we verify that the DT of the latecomer is compressed by providing a formal proof of LA on DT over income. As a DT has the double-kinked functions of income, we check them in multiple aspects: early maturation, leftward threshold, and steeper descent under a contour map and econometric methods. We find that the developing countries (the latecomer) have speedy DT (CDT, compressed DT) as well as speedy income such that DT of the latecomers starts at lower levels of income, lasts for a shorter period, and finishes at the earlier stage of economic development compared to that of developed countries (the early mover). To check the balance of DT, we classify countries into four groups of DT---balanced, slow, unilateral, and rapid transition countries. We identify that the main causes of rapid transition are due to the strong family planning programs of the government. Finally, we check the effect of latecomer's CDT on economic growth inversely: we undertake the simulation of the CDT effect on economic growth and the aging process for the latecomer. A worrying result is that the CDT of the latecomer shows a sharp upturn of the working-age population, followed by a sharp downturn in a short period. Compared to early-mover countries, the latecomer countries cannot buy more time to accommodate the workable population for the period of demographic bonus and prepare their aging societies for demographic onus. Thus, we conclude that CDT is not necessarily advantageous to developing countries. These outcomes of the latecomer's CDT can be re-interpreted as follows. Developing countries need power sources to pump up economic development, such as the following production factors: labor, physical and financial capital, and economic systems. As for labor, the properties of early maturation and leftward thresholds on DTs of the latecomer mean that demographic movement occurs at an unusually early stage of economic development; this is similar to a plane that leaks fuel before or just before take-off, with the result that it no longer flies higher or farther. What is worse, the property of steeper descent represents the falling speed of a plane so that it cannot be sustained at higher levels, and then plummets to all-time lows.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.140-142
• /
• 2021

Mobile communication technology after 5th generation requires high speed, hyper-connection, and low latency communication. In order to meet technical requirements for secure hyper-connectivity, low-spec IoT devices that are considered the end of IoT services must also be able to provide the same level of security as high-spec servers. For the purpose of performing these security functions, it is required for cryptographic keys to have the necessary degree of stability in cryptographic algorithms. Cryptographic keys are usually generated from cryptographic random number generators. At this time, good noise sources are needed to generate random numbers, and hardware random number generators such as TRNG are used because it is difficult for the low-spec device environment to obtain sufficient noise sources. In this paper we used the chip which is based on quantum characteristics where the decay of radioactive isotopes is unpredictable, and we presented a variety of methods (TRNG) obtaining an entropy source in the form of binary-bit series. In addition, we conducted the NIST SP 800-90B test for the entropy of output values generated by each TRNG to compare the amount of entropy with each method.