• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.177-186
• /
• 2017

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the maneuverability of research vessel Jera. Authors carried out full-scale sea trials for turning test, zig-zag test, and spiral test at actual sea-going condition, which were performed on starboard and port sides with 10-20 rudder angle at service speed of 10 knots. The turning circle was much different at both of the turning of port and starboard which was longer at the starboard than at the port. In the zig-zag test results, the port and starboard was $10^{\circ}$ the first and second overshoot angles were $6.0^{\circ}$, $5.8^{\circ}$ and $6.3^{\circ}$, $7.1^{\circ}$ respectively and the first overshoot angles were $16.4^{\circ}$, $17.6^{\circ}$ when using $20^{\circ}$. Her maneuverability index T and N can be easily determined by using an analogue computer with the data obtained from the zig-zag tests where K is a constant representing the turning ability and T is a constant representing her quick response. In the zig-zag tests under $10^{\circ}$ or $20^{\circ}$ at rudder angle, the value K is 0.149. 0.123 sec- and T is 11.853 and 6.193 sec and angular velocity is $0.937^{\circ}/sec$ and $1.636^{\circ}/sec$. In the spiral test, the loop width was unstable at $+0.51^{\circ}$ and $-1.19^{\circ}$ around the midship of rudder, but the tangent line at $0^{\circ}$ was close to vertical. From the sea trial results, we found that she did comply with the present criterion in the standards of maneuverability of IMO.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.490-498
• /
• 2010

HCFC-22 (chlorodifluoromethane, $CHClF_2$), one of the major components in various refrigeration, is emitted mostly from developing countries, as its consumption is not limited until 2013 by the Montreal Protocol. In addition, HFC-23 (trifluoromethane, $CHF_3$), a by-product in the manufacture of HCFC-22, is also a powerful greenhouse gas. Here, we discuss the regional emission characteristics of these compounds based on high-frequency in-situ measurements using the "Medusa" GC-MS system. HCFC-22 and HFC-23 baseline concentrations measured at Gosan (Jeju Island, Korea) from November 2007 to December 2008 increased by 1.8 ppt/yr and 0.6 ppt/yr, respectively. Pollution events of these compounds were observed, very frequently (e.g., ~2~3 times) at Gosan than baseline levels. All the measurement data were divided into four groups by simultaneously considering the ratio (HFC-23/HCFC-22) and concentration (HCFC-22) at Trinidad Head (TH, California, USA). The residence time of trajectories were then analyzed in each of the four groups. The results exhibited the existence of a strong correlation with air mass origin for each group: 1) Air masses originating from Siberia in the north and from the Pacific in the south had ratios of 0.08~0.12 and concentrations of 196.9~254.3 ppt which is highly comparable to background air at TH. 2) Air masses passing over the Southern China exhibited similar ratios but higher HCFC-22 concentrations. 3) Air masses passing over the Northern China had ratios of 0.12~0.21. 4) Air masses passing over Korea and/or Japan had ratios of 0.01~0.08. Our results suggest that the HFC-23/HCFC-22 ratio can be used as a good indicator for the assessment of the pollution with Chinese origin. We also confirmed differences in air masses traveling over Northern and Southern China, most likely due to differences in air mass travelling speed over these regions before arriving at Gosan. This signature may be treated as one of the critical components in identifying the emission sources from different parts of China.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.227-232
• /
• 2010

Purpose: Continuous irrigation method is an important step in managing wound infection. V.A.C. devices have been used in intractable wounds for reducing discharge, improving local blood flow, and promoting healthy granulation tissue. We expect synergistic effects of reduced infection and more satisfactory, accelerated wound healing when using both methods simultaneously. This study evaluated continuous irrigation combined with V.A.C. appliance for treatment of infected chronic wounds. Methods: We reviewed data from 17 patients with infected intractable chronic wounds. V.A.C. device (Group A) was used in 9 patients, and V.A.C. with antibiotics irrigation (Group B) was used in 8 patients. We placed Mepitel$^{(R)}$ on the surface of wound and placed an irrigation and aspiration tube on each side. A sponge was placed on the Mepitel$^{(R)}$ and covered with film dressing. The wound was irrigated continuously with mixed antibiotics solution at the speed of 200 cc/hr and aspirated through the wall suction at the pressure of -125 mmHg. V.A.C. applied time, wound culture and wound size were compared between the two groups. Results: No complication were seen in two groups. Compared with Group A, in the Group B, V.A.C. applied time was shortened from 32.7 days to 25.6 days and showed efficacy in the reduction rate of wound size. No statistical differences were shown in bacterial reversion. Conclusion: V.A.C. appliance with continuous irrigation is an effective new method of managing infected chronic wounds and useful to reduce treatment duration and decrease wound size. Moreover it could be applied more widely to infected wound.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.381-392
• /
• 2002

This study attempted to indentify changeability of the factorial structure of kinematic analysis in bowling. Subjects of group composed of three groups : Higher bowers who are national representative bowers with 200 average point and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 and 60 frame per secondary. T-test factorial structure analysis has been used to define variable relations. It was concluded that : 1. The difference of x1, x2, x4, x8, x9, x11, x12, x13 where significant between two group. 2. The difference of number of spin and angle of the back-hand where statistically significant between two group(p<.001, p<.05) 3. The correlation over r=.5 between the kinematic data x1, x2, x3, x9, x10, x11. In the rotation loading matrix Factor 1 was x1, x2, x9, x10 and Factor 2 relates to x3, x11. 4. In order to obtain the factor score as follow as ; Factor 1 = (0.248)X1 + (0.265)X2 + (-0.074)X3 + (0.259)X9 + (0.259)X10 + (-0.025)X11 Factor 2=(-0.016)X1 + (-0.055)X2 + (0.84)X3 + (-0.013)X9 + (-0.007)X10 + (0.553)X11.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.75-89
• /
• 2005

D. K. LEE, J. S. LEE, B. J. LEE, H. S. LEE, Y. J. KIM, S. B. PARK, J. P. JOO. Plantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, pp. 75-89, 2005. In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Address acting, forces concentrated in rare foot regions and lateral foot of right foot. Back swing top acting, relatively high force occurred in medial forefoot region of left foot and forefoot region of right foot. Impact acting, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the lateral region and rarefoot region of left foot. 2. Forces were increased in address of right foot with clubs length increased. All clubs, back swing top acting, high force value observed in the lateral forefoot region of right foot. All clubs, in impact, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the rarefoot region in driver and lateral foot region in iron on left foot. 3. Right foot forces distribution were increased in address, back swing top and left foot force distribution were increased in impact, finnish

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.81-98
• /
• 2003

The purpose of this study is to closely examine kinematic characteristics by jump phase of Li Xiaopeng motion in horse vaulting and provide the training data. In doing so, as a result of analyzing kinematic variables through 3-dimensional cinematographic using the high-speed video camera to Li Xiaopeng motion first performed at the men's vault competition at the 14th Busan Asian Games, the following conclusion was obtained. 1. It was indicated that at the post-flight, the increase of flight time and height and twisting rotational velocity has a decisive effect on the increase of twist displacement. And Li Xiaopeng motion showed longer flight time and higher flight height than Ropez motion with the same twist displacement of entire movement. Also the rotational displacement of the trunk at peak of COG was much short of $360^{\circ}$(one rotation) but twist displacement showed $606^{\circ}$. Likewise, Li Xiaopeng motion was indicated to concentrate on twist movement in the early flight. 2. It was indicated that at the landing, Li Xiaopeng motion gets the hip to move back, the trunk to stand up and the horizontal velocity of COG to slow down. This is thought to be the performance of sufficient landing, resulting from large security of rotational displacement of airborne and twist displacement. 3. It was indicated that at the board contact, Li Xiaopeng motion made a rapid rotation uprighting the trunk to recover slowing velocity caused by jumping with the horse in the back, and has already twisted the trunk nearly close to $40^{\circ}$ at board contact. Under the premise that elasticity is generated without the change of the feet contacting the board, it will give an aid to the rotation and twist of pre-flight. Thus, in the round-oH phase, the tap of waist according to the fraction and extension of hip joint and arm push is thought to be very important. 4. It was indicated that at the pre-flight, Li Xiaopeng motion showed bigger movement than the techniques of precedented studies rushing to the horse, and overcomes the concern of relatively low power of jump through the rapid rotation of the trunk. Li Xiaopeng motion secured much twist distance, increased rotational distance with the trunk bent forward, resulting in the effect of rushing to the horse. 5. At horse contact, Li Xiaopeng motion makes a short-time contact, and maintains horse take-off angle close to vertical, contributing to the increase of post-flight time and height. This is thought to be resulted from rapid move toward movement direction along with the rotational velocity of trunk rapidly earned prior to horse contact, and little shave of rotation axis according to twist motion because of effective twist in the same direction.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.7-18
• /
• 2001

The pedestrian signal systems operating presently could provide more time for the pedestrian to cross the street than the previous system, but it would increase the cycle length and cause longer delays at the signalized intersections. For instance, more than 80% of traffic signals would have to have the cycle length increased by 10sec in Daegu Metropolitan areas. Therefore. the purpose of this study is to propose a pedestrian traffic signal time that not only maintains the safety of the pedestrian but also reduces the traffic cycle length. The proposed pedestrian signal time is set to enable enough time for the elderly to cross and the flashing time is set low enough to deter the ordinary person. This new pedestrian signal time can reduce the traffic cycle length at intersections and prevent the Pedestrian crossing during flashing time. In addition to the flashing green should be changed to flashing red to warn the pedestrian he should not begin crossing as opposed to the flashing green which suggest he could cross. In this study, the speed of 1.1m/sec and 0.85m/sec are applied to the new proposed signal time for normal and elderly person respectively after analyzing data collected at Daegu Metropolitan area.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.489-498
• /
• 2016

The objective of this study is to develop road traffic accident model involving child pedestrian especially at school zones and its surrounding area. The analysis is based upon traffic accident data collected near sixty elementary schools in City of Cheongju during 2012 and 2014. This study results in two statistical models ; one is to predict the number of road traffic accidents involving children, and the other is to predict EPDO(Equivalent Prperty Damage Only). These models are represented as Poisson models. which are statistically significant with the likelihood ratios of 0.533 and 0.273. The common explanatory variables of these models are the ratio of road section with more than 4 lanes, the number of entrance and exit, the number of signalized crosswalk in school zone, the number of school zone signage including road surface marking, and the number of speed limit signs. The specific variables are the length of road stretch in school zone, the number of reflector mirrors, and the number of signalized crosswalk outside school zone. It is concluded that these types of road safety facilities can reduce the number of traffic accidents involving children at school zones and its surrounding area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.211-222
• /
• 2004

By development of wireless mobile communication, many users increased. But, in case of 1st generation or 2nd generation, transfer communication service was not satisfying high speed wireless internet Communication consumer's request such as other multimedia service because serviced based on voice and text basically. Can get through service such as data and transfer multimedia service that is not service of voice putting first in wireless hereafter. Problems by much development of service are happening, because a transmit is exposed, problem point that wireless network is much unlawful stealing use and tapping etc. As is different from this, problem can happen in service side. Can take next time for these example. By user that is not right can happen. Need method to keep away purpose that is enemy of third party in contract between both men as well as problem for document or accounting information which the third user that is enemy of third party is shared. By solution about problems, certification of contents for document and visual point confirmation must it. Applied service or certification of contents service that is rapidly point of time that is using in wire to solve problem that refer in front in this treatise in IMT-2000 to develop hereafter. Way to propose proposed efficient way using individual in IMT-2000 just as it is.