• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.5
• /
• pp.431-437
• /
• 2013

Measured acoustic signal from operating high speed train contains frequency change called doppler shift due to its motion. To avoid this doppler shift wind tunnel test is required. But scaledown of model can cause change of source characteristics. And measurements using some part of train cannot reproduce real flow condition. The best way to recognize real noise source characteristics is measurement from operating high speed train but doppler shift makes it hard. So, we developed simple dedopplerization technique for one microphone and applied to field test data of high speed train. Through this, we could capture real frequency of noise from operating high speed train.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.381-386
• /
• 2004

In order to develop a high speed train, various conditions have been considered. Internal noise level of cabins is an important one. In this study, The specification of the interior noise level for KHST(Korean High Speed Train) has been adopted the same level of KTX-spec. In this paper, the interior noise levels of KHST are measured and analysed through the speed and other conditions. According to the speed, the level of internal noise(driver's room(PC2), motorized trailer(TM1) and trailer car(TT2)) is compared. The results of measuring data show that the interior noise levels of KHST are good. And noise levels of this paper are useful in the decision of noise specification.

• Journal of the Korean Institute of Navigation
• /
• v.4 no.1
• /
• pp.1-18
• /
• 1980

As the NNSS system calculates ship's position by the doppler shift of the NNSS radio waves caused by the change of the distance between Transit Satellite and the ship, ship's speed error inevitably results in the position error, and moreover this kind of erroris most dominant compared with other errors especially in high speed ships and airplanes. Most NNSS receivers now in use have adoptedsuccessive short doppler counts as positioning data and by investigating the dispersion of serval successive positions calculated and by neglecting the mean position having dispersion of over certain threshold level, more accurate adn safe position is to be achieved. This paper proposes the method of finding ship's true speed by selecting a speed having least position dispersion for given successive doppler counts. And by computer simulation it was verified that the method proposed here is reasonable in finding the ship's desired correct speed together with the correct ship's position.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.4
• /
• pp.185-195
• /
• 2023

Objective: The purpose of this study is to improve TPI OnBaseU Power Test and golf performance by conducting CrossFit power training. Method: Three male golf players from University B participated in this study. They had 3 to 4 years of golf experience and participated in 8 weeks of CrossFit power training. Results: OnBaseU Power Test: There was a lot of improvement in Sit up throw (27.9%) and Chest pass (10.58%), but there was not much improvement in Baseline Toss (R5.9, L9.8%) and Vertical Jump (4.1%). Golf shot data: There was a very statistically significant difference in Club speed, Ball speed, and Total Length, which are related to speed, and there was no difference in Club path and Smash factor, which are related to accuracy and posture. Conclusion: CrossFit power training was effective in improving TPI OnBaseU Power Test and golf performance (Club speed, Ball speed, Total Length).

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.92-101
• /
• 2015

As one type of power quality (PQ) disturbance sources, high-speed rail (HSR) can have major impacts on the power supply grid. Providing timely and accurate warning information for PQ problems of HSR is important for the safe and stable operation of traction power supply systems and the power supply grid. This study proposes a novel warning approach to identify PQ problems and provide warning prompts based on the monitored data of HSR. To embody the displacement and status change of monitored data, multi-features of different sliding windows are computed. To reflect the relative importance degree of these features in the overall evaluation, an analytic hierarchy process (AHP) is used to analyse the weights of multi-features. Finally, a multi-features similarity algorithm is applied to analyse the difference between monitored data and the reference data of HSR, and PQ warning results based on dynamic thresholds can be analysed to quantify its severity. Cases studies demonstrate that the proposed approach is effective and feasible, and it has now been applied to an actual PQ monitoring platform.

• Journal of Biosystems Engineering
• /
• v.14 no.1
• /
• pp.1-7
• /
• 1989

This study was carried out to develop a system and methodology to simulate the engine load variation occuring during agricultural field operations for a laboratory engine test. The system consisted of an electric dynamometer, an Apple II microcomputer, and a data acquisition and control system. Several pieces of instruments were utilized to measure various engine performance data. Both engine torque and engine speed were fully controlled by a computer program. The dynamic characteristics of the system were analyzed through a series of tests and the limitations on the load simulation test were presented. The results of the study are summarized as follows: 1. Engine speed and toque were controlled by a computer program. The use of a stepping motor and reduction gears enabled engine speed be controlled within 1 rpm. 2. The natural frequency of the dynamometer-engine system was found to be around 5 Hz, at which the load simulation would be impossible because of resonance. 3. For the harmonic inputs with the frequencies above the natural frequency, the signal attenuated too much and therefore the load simulation was impossible. 4. The step response of the system showed an overshoot of 24.5 percent and the settling time for 5 percent criterion was around 3 seconds. 5. When actual field test data are utilized for load simulation, a low-pass filter should be included to attenuate the frequency components around and above the natural frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.254-265
• /
• 1994

For solving the optimal routing problem (ORP) in large data networks, and algorithm called the hierarchical aggregation/disaggregation and decomposition/composition gradient project (HAD-GP) algorithm os proposed. As a preliminary work, we improve the performance of the original iterative aggregation/disaggregation GP (IAD-GP) algorithm introduced in [7]. THe A/D concept used in the original IAD-GP algorithm and its modified version naturally fits the hierarchical structure of large data networks and we would expect speed-up in convengence. The proposed HAD-GP algorithm adds a D/C step into the modified IAD-GP algorithm. The HAD-GP algorithm also makes use of the hierarchical-structure topology of large data networks and achieves significant improvement in convergence speed, especially under a distributed environment. The speed-up effects are demonstrated by the numerical implementations comparing the HAD-GP algorithm with the (original and modified) IAD-GP and the ordinary GP (ORD-GP) algorithm.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.3
• /
• pp.83-85
• /
• 2015

It has been increased that communicate each other things such as consumer electronics, mobile equipments and wearable computer with serial communication protocol. The conventional method of SPI and I2C high speed serial communication is widely used with 2 pin of clock and data pin. It has been more important than the speed of data transfer to simplify the hardware structure because the IoT components is reduced the hardware complexity. In this paper, we describe the protocol and implementation of serial data transfer with only one pin. The proposed protocol is suitable for the mobile products that send and receive the small amount of data with low speed and low power consumption.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.103-110
• /
• 2013

WAVE system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. In this paper, we divide module that manages WAVE MAC state into a WSMP base MLME module and IP base module and we design and implement a parameter environment between WME module to manage the state of the WAVE system and MLMEX module to mange IP base of WAVE MAC therefore the date to be processed.Also, in order to verify the validity, we have carried out experiments to compare the speed of data processing by dividing data of 5Mbyte, 10Mbyte, 20Mbyte into the packets of 2KByte and 4KByte. Therefore, in WAVE system, the Parameter environments and data processing speed between WME and MLMEX module can be utilized in the various service of vehicle communication technology depending on the speed of data processing.