• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1361-1373
• /
• 2001

In the firewall systems of 3-tier client/server systems, in general, data transmission speed is declined rapidly according to the duplicated proxy services in application server and fire wall server. In this paper, an application server configuration containing the proxy functions of firewall system is proposed so that the high speed data transmission can be achieved. The proposed application server can form the dual-homed gateway by means of the additional network interface card. The screened router of application server forms the screened subnet gateway that can separate the internal network. The proposed server configuration is more effective in traffic control than the traditional firewall systems and provides high speed data transmission with the functions of firewall. It can be also cost-effective alternative to the firewall system.

• Atmosphere
• /
• v.25 no.3
• /
• pp.449-459
• /
• 2015

Effects of buildings and topography on observation environment of surface wind in central regions of urban areas are investigated using a computational fluid dynamics (CFD) model. In order to reflect the characteristics of buildings and topography in urban areas, geographic information system (GIS) data are used to construct surface boundary input data. For each observation station, 16 cases with different inflow directions are considered to evaluate effects of buildings and topography on wind speed and direction around the observation station. The results show that flow patterns are very complicated due to the buildings and topography. The simulated wind speed and direction at the location of each observation station are compared with those of inflow. As a whole, wind speed at observation stations decreases due to the drag effect of buildings. The decrease rate of wind speed is strongly related with total volume of buildings which are located in the upwind direction. It is concluded that the CFD model is a very useful tool to evaluate location of observation station suitability. And it is expected to help produce wind observation data that represent local scale excluding the effects of buildings and topography in urban areas.

• Journal of Industrial Technology
• /
• v.33 no.A
• /
• pp.31-39
• /
• 2013

There are two methods to make a distinction of deterioration of high-speed railway track. One is that an administrator checks for each attribute value of track induction data represented in graph and determines whether maintenance is needed or not. The other is that an administrator checks for monthly trend of attribute value of the corresponding section and determines whether maintenance is needed or not. But these methods have a weak point that it takes longer times to make decisions as the amount of track induction data increases. As a field of artificial intelligence, the method that a computer makes a distinction of deterioration of high-speed railway track automatically is based on machine learning. Types of machine learning algorism are classified into four type: supervised learning, unsupervised learning, semi-supervised learning, and reinforcement learning. This research uses supervised learning that analogizes a separating function form training data. The method suggested in this research uses SVM classifier which is a main type of supervised learning and shows higher efficiency binary classification problem. and it grasps the difference between two groups of data and makes a distinction of deterioration of high-speed railway track.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2009

Propagation of electromagnetic wave in the water or underground is very difficult because of the conductivity of the propagation materials. In this case, we usually use acoustic signal as ultrasonic but, it is not easy to transfer long distance with coherent method because of time varying multipath, doppler effect, and attenuations. So, we use noncoherent method as FSK to communicate between long distances. But, as the propagation speed of acoustic sound is very slow, the BW of the channel is narrow. It is very hard to guaranty the enough speed of communication like digital image data. In this paper, we proposed a new data communication protocol which can transmit multi-bit digital data with every single ping, and improve the data communication speed in the water.

• Journal of Biosystems Engineering
• /
• v.14 no.4
• /
• pp.221-228
• /
• 1989

A data acquisition system was designed to measure the forces on a rolling coulter in three coordinated directions, angular velocity of the coulter and travel speed of a soil bin. The data acquisition system consisted of a dynamometer, speed transducers, a signal conditioner, an inter-face board, an Aim-65 microcomputer and a digital data recorder. Strain gages were attached on the surface of the dynamometer and connected to form three Wheatstone bridges, which measure the draft force, the vertical force and the side force on the coulter. An interaction among three dimensional forces was found during the calibration. A matrix procedure was used to correct the forces for this interaction. Rotary shaft encoders were mounted on the coulter and on the soil bin drive to measure the angular velocity of the coulter and the travel speed of the soil bin. The angular velocity and the travel speed were computed by counting the number of pulse signals from the rotary shaft encoders every 0.2 second. The digital signals from the rotary shaft encoders were connected to counters and the analog signals from the dynamometer, after passing through the signal conditioner, were connected to the A/D converter. The microcomputer programs, written in assembly language, were developed to read signals from the transducers, convert them to actual unit, display them upon request and record them on a sigital tape every 0.2 second.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.586-589
• /
• 2018

As the convergence of traffic system and Big-data technology, new convenient services which is helpful for drivers and pedestrian are appeared. Recently, the various researches about the traffic system, such as prediction of traffic jam and finding the shortest path, are studied. In this paper, we collect the data of taxi trips in Daegu City, and visualize them on the map of Daegu City. And then, we select specific sections of roads in the city, and by using the data of location and speed about taxis and the information of the road sections, calculate the traffic of that section and the average speed of cars on that section. As a result of this, we give help solving the problem of the specific road sections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.63-73
• /
• 2011

Travel speed is an important parameter for measuring road traffic. UTIS(Urban Traffic Information System) was developed as a mobile detector for measuring link travel speeds in South Korea. After investigation, we founded that UTIS includes some missing data caused by the lack of probe vehicles on road segments, system failures and etc. Imputation is the practice of filling in missing data with estimated values. In this paper, we suggests a new model for imputing missing data to provide accurate link travel speeds to the public. In the field test, new model showed the travel speed measuring accuracy of 93.6%. Therefore, it can be concluded that the proposed model significantly improves travel speed measuring accuracy.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.81-90
• /
• 2019

The data rate for transmission through fiber-optic cables has increased to 400 Gbps in single-wavelength channels. However, speeds up to 1 Tbps are required now to meet the ever-increasing bandwidth demand driven by the diverse requirements of contemporary applications for high-quality on-demand video streaming, cloud services, various social media, and emerging 5G-enabled applications. Because the data rates of the per-channel optical interfaces depend strongly on the operational speed of the optoelectronic devices used in optical transceivers, ultrahigh-speed photonic devices and components, and eventually, chip-level transmitter and receiver technologies, are essentially required to realize futuristic optical transceivers with data rates of 1 Tbps and beyond. In this paper, we review the recent progress achieved in high-speed optoelectronic devices, such as laser diodes, optical modulators, photodiodes, and the transmitter-receiver optical subassembly for optical transceivers in data centers and in metro/long-haul transmission.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.501-511
• /
• 2023

This paper introduces and analyzes SAE J2716 SENT (Single Edge Nibble Transmission) protocol, a technical standard for serial transmission of digital sensor data in automotive applications. SENT can transmit both high-speed sensor data and low-speed sensor data in one data frame and has a total of 6 transmission modes, including 3 high-speed channel modes and 3 low-speed channel modes. In this paper, a SENT controller that supports all six modes of the SENT protocol was designed in Verilog HDL, implemented in FPGA, and verified with an oscilloscope and PC.