• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.593-596
• /
• 2018

The speed of vehicles has remained a significant factor that influences the severity of accidents and traffic accident rate in many parts of the world including South Korea. This behavior where drivers drive at speeds which exceed a posted safe threshold is known as 'speeding'. Over the past twenty years, the Korean National Police Agency (NPA) has become aware of an increased frequency of drivers who are speeding. Therefore, fixed-type ASE systems [1] have been installed on hazardous road sections of many highways. These system monitor vehicle speeds using a camera. However, the use of ASE systems has changed the behavior of the drivers. Specifically, drivers reduce speed or avoid the route where the cameras are mounted. It is not practical to install cameras at every possible location. Therefore, it is challenging to thoroughly explore the location where speeding occurs. In view of these problems, the author of this paper designed and implemented a prototype visualization system in which point and color are used to show vehicle location and associated over-speed information. All of this information was used to create a comprehensive visualization application to show information about vehicle driving. In this paper, we present an approach detecting vehicles moving at speeds which exceed a threshold and visualizing the points those violations occur on a map. This was done using vehicle trajectory data collected in Daegu city. We propose steps for exploring the data collected from those sensors. The resulting mapping has two layers. The first layer contains the dynamic vehicle trajectory data. The second underlying layer contains the static road networks. This allows comparing the speed of vehicles on roads with the known maximum safe speed of those roads, and presents the results with a visualization tool. We also compared data about people who drive over threshold safe speeds on each road on days and weekends based on vehicle trajectories. Finally, our study suggests improved times and locations where law enforcement should use monitoring with speed cameras, and where they should be stricter with traffic law enforcement. We learned that people will drive over the speed limit at midnight more than 1.9 times as often when compared with rush hour traffic at 8 o'clock in the morning, and 4.5 times as often when compared with traffic at 7 o'clock in the evening. Our study can benefit the government by helping them select better locations for installation of speed cameras. This would ultimately reduce police labor in traffic speed enforcement, and also has the potential to improve traffic safety in Daegu city.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1811-1825
• /
• 2011

This study analyzed the transit services with respect to transit service measures such as the load factor representing number of passengers between stops, dwelling time, and operational speed based on transit smart card data recorded in 2009. A case study on the local bus line 7024 connecting Seoul railway station to evaluate bus services at passenger perspectives was accomplished. From the results, we found that the dwelling time was not affected by the number of passengers which is because the tagging patterns are different among passengers. The operational speed was analyzed by calculating the average speed of the bus route and the speed of each bus stops based on dwelling time. Interestingly, calculating operation speed based on the transit smart card data is the first time effort ever made and this means that it is not necessary to observe travel speed of bus and railway at a field level any more. we hope that this study will be a basis of evaluation of transit services purely based on the transit smart card data and help to make better transit services for passengers and operators as well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1271-1279
• /
• 2013

In this paper, a study on the prediction method of basic wind speed at the construction site of long-span bridge using short-term measurements was conducted. To determine the basic wind speed in the wind resistant design for the long-span bridge away from the weather station, statistical analysis of long-term data at site is required. Wind observation mast was installed at site, and short-term measurements were gathered and the correlation analysis between the site and the station was done using regression analysis and MCP(Measure-Correlate-Predict). The long-term wind data of the site was obtained from correlation formula after topographical revision of long-term data of the station. And basic wind speed could be estimated by extreme probability distribution analysis. The research results show that the wind speed by regression analysis is predicted lower than by MCP and after this study a series of correlation analyses at several sites will show clearly the difference two methods. And also a quality control of long-term wind data is very important in estimation of wind speed.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.591-600
• /
• 2018

The probabilistic characterization of wind field characteristics is a significant task for fatigue reliability assessment of long-span railway bridges in wind-prone regions. In consideration of the effect of wind direction, the stochastic properties of wind field should be represented by a bivariate statistical model of wind speed and direction. This paper presents the construction of the bivariate model of wind speed and direction at the site of a railway arch bridge by use of the long-term structural health monitoring (SHM) data. The wind characteristics are derived by analyzing the real-time wind monitoring data, such as the mean wind speed and direction, turbulence intensity, turbulence integral scale, and power spectral density. A sequential quadratic programming (SQP) algorithm-based finite mixture modeling method is proposed to formulate the joint distribution model of wind speed and direction. For the probability density function (PDF) of wind speed, a double-parameter Weibull distribution function is utilized, and a von Mises distribution function is applied to represent the PDF of wind direction. The SQP algorithm with multi-start points is used to estimate the parameters in the bivariate model, namely Weibull-von Mises mixture model. One-year wind monitoring data are selected to validate the effectiveness of the proposed modeling method. The optimal model is jointly evaluated by the Bayesian information criterion (BIC) and coefficient of determination, $R^2$. The obtained results indicate that the proposed SQP algorithm-based finite mixture modeling method can effectively establish the bivariate model of wind speed and direction. The established bivariate model of wind speed and direction will facilitate the wind-induced fatigue reliability assessment of long-span bridges.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2014

In this paper, travel speed patterns were deducted based on historical DSRC travel speed data using Decision Tree technique to improve availability of the massive amount of historical data. These patterns were designed to reflect spatio-temporal vicissitudes in reality by generating pattern units classified by months, time of day, and highway sections. The study area was from Seoul TG to Ansung IC sections on Gyung-bu highway where high peak time of day frequently occurs in South Korea. Decision Tree technique was applied to categorize travel speed according to day of week. As a result, five different pattern groups were generated: (Mon)(Tue Wed Thu)(Fri)(Sat)(Sun). Statistical verification was conducted to prove the validity of patterns on nine different highway sections, and the accuracy of fitting was found to be 93%. To reduce travel pattern errors against individual travel speed data, inclusion of four additional variables were also tested. Among those variables, 'traffic condition on previous month' variable improved the pattern grouping accuracy by reducing 50% of speed variance in the decision tree model developed.

• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1197-1208
• /
• 2007

These days, most of SMART card, JAVA card, picked up the JAVA Card Platform gets the position as a standard. Java Card technology provides implantation, platform portability and high security function to SMART Card. Compared to normal Smart Card, JAVA card has a defect that is a low running speed caused by a distinctive feature of JAVA programming language. Factors that affect JAVA Card execution speed are the method how to save the data and install the applets of JAVA Card installation instrument. In this paper, I will offer the plan to improve JAVA Card program's loading and execution speed. At Java Card program, writing, updating and deleting process for data at EEPROM can be improved of Java Card speed by using high speed RAM. For this, at JAVA Card as a application of RAM, I will present prefetching LRU-ORL Buffer Cache Technique that is suitable for Java Card environment. As a data character, managing all data created from JAVA Curd at Buffer Cache, decrease times of recording at maximum for EEPROM so that JAVA Card program upload and execution speed will be improved.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.624-626
• /
• 1998

In this paper. a new simple and efficient technique to improve the convergence speed of LMS algorithm is introduced. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, are analysis to prove theoretically the improvement of convergence speed. The theoretical analysis shows that the data-recycling LMS technique can increase convergence speed by (B+1) times, where B is the number of recycled data. The results of the computer simulation demonstrate that the simulation results are in accordance with the theoretical analysis and the superiority of the filter algorithm

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.513-520
• /
• 2005

High-speed Portable Internet system provides 1-3 Mbps data transmission speed to terminals moving up to 60 km/sec. Since High-speed Portable Internet system supports services requiring different QoS, it needs an efficient scheduling method based on those different QoSs. This paper shows the performance comparisons of several different packet scheduling schemes for minimizing the mean delay over the downlink of High-speed Portable Internet system to support the packet data service. Simulation results show that proposed scheme superior to other schemes at side throughput and data loss rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.574-577
• /
• 1998

In this paper, a new simple and efficient technique to improve the convergence speed of LMS algorithm is proposed in an interference-limited multi-path fading environment as encountered in indoor wireless communications. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, are analyzed to prove theoretically the improvement of convergence speed. The theoretical analysis shows that the data-recycling in technique can increase convergence speed by (B+1) times without increasing the computational complexity substantially where B is the number of recycled data. The results of the computer simulation demonstrate that the simulation results are in accordance with the theoretical analysis and the superiority of the filter algorithm.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.