• 제목/요약/키워드: spectral shape

검색결과 235건 처리시간 0.025초

초분광 영상을 활용한 석조문화재 표면오염물 분류 및 정확도 평가 - 경주 굴불사지 석조사면불상을 중심으로 - (Accuracy Assessment and Classification of Surface Contaminants of Stone Cultural Heritages Using Hyperspectral Image - Focusing on Stone Buddhas in Four Directions at Gulbulsa Temple Site, Gyeongju -)

  • 안유빈;유지현;최명주;이명성
    • 보존과학회지
    • /
    • 제36권2호
    • /
    • pp.73-81
    • /
    • 2020
  • 초분광 이미지 분석은 석조문화재 손상지도 제작 시 화학적·생물학적 오염의 정량적인 면적산출이 어려운 단점을 보완하기 위해 제안되었다. 이 연구에서는 다양한 표면오염물이 나타나는 경주굴불사지 석조사면불상을 대상으로 초분광 이미지 분석을 수행하였다. 이때 화학적·생물학적 오염은 색상과 형태에 따라 10가지 범주로 구분하였고 범주의 참조 이미지 제작법을 제시하였다. 또한 오염물을 분류하기 위해 SAM 알고리듬을 사용하고 관심영역을 사용한 분류방법(Method A)과 영상에서 추출한 분광정보를 라이브러리로 구축하여 분류하는 방법(Method B)을 적용하였다. 분류된 이미지를 참조 이미지와 비교한 결과, 정확도는 분류 방법에 따라 52.07%와 63.61%, Kappa 지수는 0.43과 0.55로 산출되었고, 분류시 오분류 화소는 동일한 계열의 오염에 분포하는 경향을 보인다.

GSM 무선통신 시스템을 위한 디지털 GMSK 변조기 설계 및 성능분석 (All Digital GMSK Modulator for the GSM Mobile System)

  • 김범진;한재충;홍승억
    • 한국통신학회논문지
    • /
    • 제25권4A호
    • /
    • pp.502-511
    • /
    • 2000
  • GMSK 변조방식은 비선형 변조방식으로서 기존의 선형변조방식에 비해 주파수 응답이 우수하다. 따라서, 유럽 등지에서는 인접 채널간 간섭을 중일 수 있는 변조방식으로 많이 활용되어 왔으며 특히 ETSI에서는 범유럽 셀룰러 표준안인 GSM 시스템을 위한 변조방식으로 채택하고 있다. 기존의 아날로그 구현 방식은 정확한 구현의 어려움, 시간에 따른 주파수 응답의 변화, 이로 인한 대량생산 시 문제점 등 많은 문제점을 가지고 있으며 따라서 점차로 디지털 구현 방식을 선호하게 되었다. 하지만 기존의 디지털 변조기 설계 방식은 그 과정이 복잡하고 변조방식 및 사양의 변화에 따른 유연성이 부족하다는 문제점을 갖고 있으며 따라서 점차로 디지털 구현 방식을 선호하게 되었다. 하지만 기존의 디지털 변조기설계 방식은 그 과정이 복잡하고 변조 방식 및 사양의 변화에 따른 유연성이 부족하다는 문제점을 안고 있다. 본 논문에서는 간단하고 체계적인 디지털 변조기 설계 방식을 제안하고 이 방식으로 ETSI에서 권고한 GMSK 변조기를 설계하고 구현하는 과정에 대하여 설명한다. 여기에서 모의 실험을 통한 설계파라미터들의 결정 과정과 성능 분석 과정 및 結\ulcorner대한 결과에 관한 설명도 포함되어 있다. 그리고 이것을 직접 DSP 상에서 구현하였는데 그 결과 제안된 방식은 요구되는 계산량이 매우 작고 전력 소모 또한 매우 작아서 저전력, 고성능의 요구 사항을 쉽게 만족시킬 수 있음을 알 수 있었다.

  • PDF

멀티로터형 무인항공기 프로펠러의 고효율 및 저소음 설계를 위한 공력 소음 예측 기법 개발 (Development of aerodynamic noise prediction technique for high efficiency and low noise design of unmanned aerial vehicle propeller)

  • 곽두영;이수갑
    • 한국음향학회지
    • /
    • 제36권2호
    • /
    • pp.89-99
    • /
    • 2017
  • 멀티로터형 무인항공기는 군사용 목적뿐 아니라 항공 촬영 및 무인 택배 수단 등 민간 산업까지 그 활용 범위를 넓혀가고 있다. 무인항공기의 보다 폭넓은 활용을 위해서는 추진체인 프로펠러의 공력 효율 개선과 소음의 저감을 위한 연구가 선행되어야 하며, 이는 주어진 환경에서 공력 성능 및 소음을 예측할 수 있는 기술이 바탕이 되어야만 가능하다. 본 연구에서는 소형 무인항공기 프로펠러를 대상으로 공력 및 소음 예측 기법을 개발하고, 실제 측정을 통한 결과와의 비교를 통해 검증하였다. 분당 회전수의 변화에 따른 추력 및 토크와 주어진 위치에서의 주파수 스펙트럼 예측에서 모두 예측 기법의 신뢰성을 확보하였으며, 이를 통해 프로펠러의 형상 설계에 기반이 될 수 있는 기틀을 마련하였다.

직류 마이크로 할로우 음극 방전을 이용한 이단 마이크로 플라즈마 추력기의 배기 플룸의 형상 특성 (Shape Characteristics of Exhaust Plume of Dual-Stage Plasma Thruster using Direct-Current Micro-Hollow Cathode Discharge)

  • ;신지철
    • 한국추진공학회지
    • /
    • 제20권3호
    • /
    • pp.54-62
    • /
    • 2016
  • 이단 마이크로 할로우 음극 방전(MHCD) 플라즈마를 사용하는 마이크로 플라즈마 추력기(${\mu}PT$)에 대한 실험 연구가 수행되었다. 40 sccm의 아르곤 유량과 10 W 미만의 전력으로 보다 더 직진성 있고 긴 침투 길이를 가진 배기 플룸을 만드는 정전기적 가속이 이단 MHCD에 의해 발생되었다. 전압-전류 특성에서는 이단 운전 시 두 번째 단의 가속 전압이 일정하게 되는 최적 영역이 있음을 보였다. 추정된 배기 플룸의 길이가 가속 전압으로 추산된 이론적 배출 속도와 비슷한 증가 경향을 보였다. 다중 채널을 가진 마이크로 플라즈마 추력기는 동일한 총 전력량에 대하여 단일 채널 추력기와 비슷한 특성을 보여, 이는 채널 당 허용 전력량을 낮춰 전체 전력량을 높일 수 있음을 의미한다. 아르곤 원자 분광선의 볼츠만 그래프에서 배기 플룸의 평균 전자 여기 온도는 약 2.6 eV(=약 30,170 K)임이 확인되었다.

차량 시스템의 소음 기여도분석 및 공진 규명을 통한 전자식 주차 브레이크 소음원 규명 (Noise Source Identification of Electric Parking Brake by Using Noise Contribution Analysis and Identifying Resonance of Vehicle System)

  • 박군동;서범준;양인형;정재은;오재응;이정윤
    • 한국자동차공학회논문집
    • /
    • 제20권3호
    • /
    • pp.119-125
    • /
    • 2012
  • Caliper intergrated Electric Parking Brake (EPB) is an automatic parking brake system, attached to rear caliper. Because EPB uses luxury vehicles recently, the drivers of vehicles are sensitive to the EPB noise. EPB is operated by the motor and gear, so noise is generated by motor and gear. In order to reduce noise, One of EPB manufacturers uses helical gear and changes the shape of EPB housing. But these methods are not optimized for reduction of interior noise. There are many noise transfer paths into vehicle interior and it is difficult to identify the noise sources. Therefore, in this study, we performed contribution analysis and modal testing in the vehicle system. It is possible to distinguish between air-borne noise and structure-borne noise in the vehicle interior noise by comparing interior noise peak with resonance mode map.

Inelastic behavior of systems with flexible base

  • Fernandez-Sola, Luciano R.;Huerta-E catl, Juan E.
    • Earthquakes and Structures
    • /
    • 제14권5호
    • /
    • pp.411-424
    • /
    • 2018
  • This study explores the inelastic behavior of systems with flexible base. The use of a single degree of freedom system (ESDOF) with equivalent ductility to represent the response of flexible base systems is discussed. Two different equations to compute equivalent ductility are proposed, one which includes the contribution of rigid body components, and other based on the overstrength of the structure. In order to asses the accuracy of ESDOF approach with the proposed equations, the behavior of a 10-story regular building with reinforced concrete (RC) moment resisting frames is studied. Local and global ductility capacity and demands are used to study the modifications introduced by base flexibility. Three soil types are considered with shear wave velocities of 70, 100 and 250 m/s. Soil-foundation stiffness is included with a set of springs on the base (impedance functions). Capacity curves of the building are computed with pushover analysis. In addition, non linear time history analysis are used to asses the ductility demands. Results show that ductility capacity of the soil-structure system including rigid body components is reduced. Base flexibility does not modify neither yield and maximum base shear. Equivalent ductility estimated with the proposed equations is fits better the results of the numerical model than the one considering elastoplastic behavior. Modification of beams ductility demand due to base flexibility are not constant within the structure. Some elements experience reduced ductility demands while other elements experience increments when flexible base is considered. Soil structure interaction produces changes in the relation between yield strength reduction factor and structure ductility demand. These changes are dependent on the spectral shape and the period of the system with fixed and flexible base.

Synthesis of Biosurfactant-Based Silver Nanoparticles with Purified Rhamnolipids Isolated from Pseudomonas aeruginosa BS-161R

  • Kumar, C. Ganesh;Mamidyala, Suman Kumar;Das, Biswanath;Sridhar, B.;Devi, G. Sarala;Karuna, Mallampalli SriLakshmi
    • Journal of Microbiology and Biotechnology
    • /
    • 제20권7호
    • /
    • pp.1061-1068
    • /
    • 2010
  • The biological synthesis of nanoparticles has gained considerable attention in view of their excellent biocompatibility and low toxicity. We isolated and purified rhamnolipids from Pseudomonas aeruginosa strain BS-161R, and these purified rhamnolipids were used to synthesize silver nanoparticles. The purified rhamnolipids were further characterized and the structure was elucidated based on one- and two-dimensional $^1H$ and $^{13}C$ NMR, FT-IR, and HR-MS spectral data. Purified rhamnolipids in a pseudoternary system of n-heptane and water system along with n-butanol as a cosurfactant were added to the aqueous solutions of silver nitrate and sodium borohydride to form reverse micelles. When these micelles were mixed, they resulted in the rapid formation of silver nanoparticles. The synthesized nanoparticles were characterized by UV-Visible spectroscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy (EDS). The nanoparticles formed had a sharp adsorption peak at 410 nm, which is characteristic of surface plasmon resonance of the silver nanoparticles. The nanoparticles were monodispersed, with an average particle size of 15.1 nm (${\sigma}={\pm}5.82$ nm), and spherical in shape. The EDS analysis revealed the presence of elemental silver signal in the synthesized nanoparticles. The formed silver nanoparticles exhibited good antibiotic activity against both Grampositive and Gram-negative pathogens and Candida albicans, suggesting their broad-spectrum antimicrobial activity.

주파수영역 광 간섭 단층촬영 시스템을 위한 파장가변 광원 및 신호처리계의 구현 (Implementation of the Wavelength-Swept-Source and Signal Processing for the Frequency Domain Optical Coherence Tomography)

  • 이응제;김용평
    • 한국광학회지
    • /
    • 제18권5호
    • /
    • pp.309-316
    • /
    • 2007
  • 주파수영역 광 간섭 단층촬영 시스템을 위한 파장가변 광원과 주파수 보정(calibration)을 위한 신호처리계를 구현하였다. 제작된 레이저의 평균출력을 부스터(booster) 반도체 광 증폭기를 이용하여 14 mW까지 증폭시키고, 레이저 스펙트럼의 편이(shift)를 보상하였다. 패브리-페롯 에탈론(Fabry-Perot etalon)과 디지털 신호처리(digital signal processing)로 신호처리계를 제작함으로서 파장가변광원의 속도가변에 따른 비트주파수(beat frequency)의 넓어짐을 보정하였다. 제작된 광 간섭 단층촬영 시스템은 종방향 주사속도 154.4 kHz, 측정깊이 0.95 mm, 종방향 분해능 $12{\pm}0.37{\mu}m$의 특성을 가진다.

지각 특성 및 라우드니스를 이용한 입체음향의 성능 개선 (Enhancement of the 3D Sound's Performance using Perceptual Characteristics and Loudness)

  • 구교식;차형태
    • 방송공학회논문지
    • /
    • 제16권5호
    • /
    • pp.846-860
    • /
    • 2011
  • 인간의 청각기관은 소리의 방향과 거리인지에 있어서 양 귀에 들어오는 소리세기의 차이, 위상의 차이, 그리고 주파수 스펙트럼의 차이 등의 정보들을 복합적으로 이용한다. 이런 정보를 종합적으로 포함하고 있는 것을 머리전달함수라 하며, 이를 이용하여 실질적으로 존재하지 않는 음원을 근사적으로 생성할 수 있는 입체음향 시스템을 구현할 수 있다. 그러나 비개인화 된 머리전달함수는 음상정위 성능을 떨어뜨리는 주된 원인이 된다. 이에 본 논문에서는 이 머리전달함수를 이용한 3차원 음상정위를 위해 사람의 청각 특성을 이용한 알고리즘을 제안한다. 청자가 정확한 방향을 인지하기 위해 1차로 측정된 머리전달함수의 청각 자극 에너지를, 2차로 전역 마스킹 임계치와 라우드니스를 이용하여 방향감을 강조하였다. 제안된 알고리즘의 성능 평가를 위해 청감 테스트를 수행하였으며 실험결과 기존의 알고리즘에 비해 입체음향의 전체적인 인지도가 50% 이상 증가하였음을 확인할 수 있었다.

1/3-옥타브 대역통과필터를 이용한 음상정위기법 성능 향상 (Improving a Sound Localization Using 1/3-octave Band Pass Filter)

  • 황신;양진우;정완섭;김순협
    • 한국음향학회지
    • /
    • 제20권3호
    • /
    • pp.98-103
    • /
    • 2001
  • 인간의 청각기관은 소리의 방향과 거리인지에 있어서 여러 가지의 정보들을 복합적으로 이용한다. 이러한 양 귀에 들어오는 소리세기의 차이, 위상의 차이, 그리고 주파수 스펙트럼의 차이 등의 정보들을 종합적으로 포함하고 있는 것이 머리전달함수이다. 본 논문에서는 이 머리전달함수를 이용한 3차원 음상정위를 위해 사람의 청각기관에 알맞은 1/3-옥타브 대역통과필터를 이용한 알고리즘을 제안한다. 먼저 측정된 머리전달함수의 음색왜곡 및 음질저하를 최소화하기 위해 1/3-옥타브 대역통과필터를 이용해 간략화시켰으며, 간략화된 데이터베이스를 크기와 시간의 부분으로 나누어 모듈을 구성하였다. 이의 성능평가를 위해 객관평가와 주관평가를 실시하였으며, 실험결과 85.7%정도의 음상정위의 성능 개선을 가져왔다.

  • PDF