• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.151-154
• /
• 2008

Information on the area and spatial distribution of crop fields is needed for biomass production, arrangement of water resources, trace gas emission estimates, and food security. The present study aims to monitor crops status during the growing season by estimating its aboveground biomass and leaf area index (LAI) from field reflectance taken with a hand-held radiometer. Field reflectance values were collected over specific spectral bandwidths using a handheld radiometer(LI-1800). A methodology is described to use spectral reflectance as indicators of the vegetative status in crop cultures. Two vegetation indices were derived from these spectral measurements. In this paper, first we analyze each spectral reflectance characteristics of vegetation in the order of growth stage. Vegetation indices (NDVI, GNDVI) were calculated from crop reflectance. And assess the nature of relationships between LAI and VI, as measured by the in situ NDVI and GNDVI. Among the two VI, NDVI showed predictive ability across a wider range of LAI than did GNDVI. Specific objectives were to determine the relative accuracy of these two vegetation indices for predicting LAI. The results of this study indicated that the NDVI and GNDVI could potentially be applied to monitor crop agriculture on a timely and frequent basis.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.305-311
• /
• 2006

Although there have been several attempts to estimate forest LAI using optical remote sensor data, there are still not enough evidences whether the NDVI is effective to estimate forest LAI, particularly in fully closed canopy situation. In this study, we have conducted a simple correlation analysis between LAI and spectral reflectance at two different settings: 1) laboratory spectral measurements on the multiple-layers of leaf samples and 2) Landsat ETM+ reflectance in the close canopy forest stands with fieldmeasured LAI. In both cases, the correlation coefficients between LAI and spectral reflectance were higher in short-wave infrared (SWIR) and visible wavelength regions. Although the near-IR reflectance showed positive correlations with LAI, the correlations strength is weaker than in SWIR and visible region. The higher correlations were found with the spectral reflectance data measured on the simulated vegetation samples than with the ETM+ reflectance on the actual forests. In addition, there was no significant correlation between the forest.LAI and NDVI, in particular when the LAI values were larger than three. The SWIR reflectance may be important factor to improve the potential of optical remote sensor data to estimate forest LAI in close canopy situation.

• Korean Journal of Remote Sensing
• /
• v.1 no.1
• /
• pp.63-87
• /
• 1985

Considerable experience has been reported on the use of spectral data to measure the canopy biomass of dryland grain crops and the use of these estimates to forecast subsequent grain yield. These basic procedures were retested to assess the use of the general process to forecasting grain yield for paddy rice. The use of the ratio of a multiband radiometer simulation of Thematic Mapper band 4(.76 to .90 .mu.m) divided by band 3 (.63 to .69 .mu.m) was tested to estimate the canopy biomass of paddy rice as a function of the stage of development of the rice. The correlation was found to be greatest (R = .94) at panicle differentiation about midway through the development cycle of the rice canopy. The use of this ratio of two spectral bands as a surrogate for canopy biomass was then tested for its correlation against final grain yield. These spectral estimates of canopy biomass produced the highest correlations with final grain yield (R = .87) when measured at the canopy development stages of panicle differentiation and heading. The impact of varying the amounts of supplemental nitrogen on the use of spectral measuremants of canopy biomass to estimate grain yield was also determined. The effect of the development of a significant amount of weed biomass in the rice canopy was also clearly detected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.146-151
• /
• 2010

A comprehensive real-time spectral phase interferometry for direct electric field reconstruction (SPIDER) apparatus for characterizing femtosecond laser pulses is demonstrated. The SPIDER provides the temporal profiles of femtosecond laser pulses, reconstructed at the speed of 3.5 Hz, with parameters of the spectral phase such as group delay dispersion and third-order dispersion. The apparatus is applied successfully to optimize the spectral dispersion of a kHz femtosecond Ti:Sapphire laser by adjusting a grating compressor in real time.

• Journal of Biomedical Engineering Research
• /
• v.4 no.1
• /
• pp.29-36
• /
• 1983

In this paper, center frequency down slift of ultrasonic echo signals which for the measurements of frequency dependent attenuation in the biological tissue are estimated. Center frequency down shift of echo-signals are estimated after signal spectrum analysis of whole echo-signals. In case of signal spectrums are simple, estimation of down shift frequency is very simple and in case of complicate spectrum, estimation of down shift frequency is depend on spectral shape. In case of unable to estimate, frequency dependence of medium is nonlinear(n) 1), in which upper shift of spectrums are presented. In case of unable to estimate, spectrum analysis are performed at local position. At consquence, we know that spectral dispersions are caused complicately by biological tissue layer.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.649-657
• /
• 2015

We present a surface color measurement including quantities of surface color, methods, and uncertainty evaluation. Based on a relation between spectral reflectance and surface color, we study how an uncertainty of spectral reflectance propagates to surface color. In analyzing the uncertainty propagation, we divide the uncertainty into uncorrelated components, fully correlated components, and correlated components with spectrally varying correlations. As an experimental example, we perform spectro-reflectometric measurements for ceramic color plates. With measured spectral reflectance and its uncertainty evaluation, we determine surface color and analyze uncertainties of the ceramic color plates.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1021-1025
• /
• 1999

Near-infrared (NIR) spectroscopy has been successfully utilized for the rapid identification of six typical petroleum products such as light straight-run (LSR), naphtha, kerosine, light gas oil (LGO), gasoline, and diesel. The spectral features of each product were reasonably differentiated in the NIR region, and the spectral differences provided enough qualitative spectral information for discrimination. For discrimination, principal component analysis (PCA) combined with Mahalanobis distance was used to identify each petroleum product from NIR spectra. The results showed that each product was accurately identified with an accuracy over 95%. Most noticeably, LSR, kerosine, gasoline, and diesel samples were predicted with identification accuracy of 99%. The overall results ensure that a portable NIR instrument combined with a multivariate qualitative discrimination method can be efficiently utilized for rapid and simple identification of petroleum products. This is especially important when local at-site measurements are necessary, such as accidental petroleum leakage and regulation of illegal product blending.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.48.3-48.3
• /
• 2019

We present analysis results of far infrared (IR) data for 3C 58. We use Herschel observations to measure the IR spectral slope of the source. Our measurements add new IR data points to exisiting high-frequency ones and allow us to improve the IR spectral energy distribution (SED) of 3C 58, and so a cooling break expected in the optical band can be located more precisely. We interpret the SED and the break using a synchrotron+ inverse-Compton model for PWNe and infer flow properties in 3C 58. Because the IR data are contaminated by foregrounds and backgrounds, we discuss impacts of the contamination on our conclusion.

• Structural Engineering and Mechanics
• /
• v.86 no.2
• /
• pp.237-247
• /
• 2023

Fourier series-based models in the time domain are frequently established to represent individual bouncing loads, which neglects the stochastic property of human bouncing activity. A power spectral density (PSD) model in the frequency domain for individual bouncing loads is developed herein. An experiment was conducted on individual bouncing loads, resulting in 957 records linked to form long samples to achieve a fine frequency resolution. The Welch method was applied to the linked samples to obtain the experimental PSD, which was normalized by the bouncing frequency and the harmonic order. The energy, energy distribution center, and energy distribution shape of the experimental PSD were investigated to establish the PSD model. The proposed model was used to analyze structural vibration responses using stochastic vibration theory, which was verified via field measurements. It is believed that this framework can evaluate the vibration capacity of structures excited by bouncing crowds, such as concert halls and grandstands.