• Structural Engineering and Mechanics
• /
• v.51 no.4
• /
• pp.581-599
• /
• 2014

In this paper the overall dynamic response of simple railway bridges subjected to high-speed trains is investigated numerically based on the mechanical models of simply supported single-span and continuous two-span Bernoulli-Euler beams. Each axle of the train, which is composed of rail cars and passenger cars, is considered as moving concentrated load. Distance, magnitude, and maximum speed of the moving loads are adjusted to real high-speed trains and to load models according to Eurocode 1. Non-dimensional characteristic parameters of the train-bridge interaction system are identified. These parameters permit a spectral representation of the dynamic peak response. Response spectra assist the practicing engineers in evaluating the expected dynamic peak response in the design process of railway bridges without performing time-consuming time history analyses.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.382-388
• /
• 2001

KITSAT-3, launched at May 26 1999, has an earth observation optical payload named MEIS (Multi-spectral Earth Imaging System). The MEIS is a Managin mirror telescope of aperture size of 95mm, and it images the ground with the ground sampling distance of 13.8m over 48km at the altitude of 720km using three different observations bands. This paper first presents the design and then the optics, relating results of manufacturing, integration and test. Finally it briefly discusses the current status of MEIS operation.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.286-291
• /
• 2003

Asymmetric multiple quantum well ridge waveguide laser diodes (AMQW RWG LDs) with a wide and flat gain spectrum were designed and fabricated. The operating parameters and gain spectra were measured and analyzed for uncoated and anti-reflection (AR) coated LDs. For AR coated 500 mm-long RWG LOs, the extremely flat gain spectrum over a spectral range of 90 nm was obtained at the current 75 ㎃.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.326-336
• /
• 2008

A WDM-PON has been considered as an ultimate solution for access networks. However, there were many technical and practical issues for commercial deployment. These issues were solved with wavelength locked F-P LD and the WDM-PONs employing this optical source were commercialized. These WDM-PON systems have been deployed in Korea, Europe, and US. We reviewed wavelength locking technology and WDM-PON achievements. When we inject spectrum sliced broadband light into an F-P LD, the multimode output is changed to a quasi single mode. Then, we can use the single mode light for WDM signal transmission. The broad spectral gain of the semiconductor gain medium enables a color-free operation of WDM-PON, i.e., an identical ONT can be used for each user. The wavelength locking properties depend on many parameters, especially alignment of injection wavelength to a lasing mode, passband profile of AWG and front facet reflectivity of F-P LD. However, these dependencies can be reduced by proper design of the laser and the injection bandwidth. Thus, WDM-PON systems have been achieved with color-free operation.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.283-290
• /
• 2021

Recently, correlated superposition coding (CSC) has been proposed to implement non-orthogonal multiple access (NOMA) without successive interference cancellation (SIC), without loss of spectral efficiency, in contrast to conventional independent superposition coding (ISC). However, correlation between signals has reduced the average total allocated power, which results in degraded performance. Thus, in order to avoid the reduction of the average total allocated power owing to correlation between signals, this paper proposes a cross-correlated quadrature amplitude modulation (QAM) NOMA scheme under Rayleigh fading channel surroundings. First, we design the cross-correlated QAM NOMA scheme. Then, simulations demonstrate that for the weaker channel gain's user, the symbol error rate (SER) performance of the proposed cross-correlated QAM NOMA improves largely, whereas for the stronger channel gain's user, the SER performance of the proposed cross-correlated QAM CSM NOMA degrades little, compared to that of the conventional QAM NOMA.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.111-118
• /
• 2019

The optical characteristics of a tunable flattened-pass-band fiber comb filter, based on the polarization-diversified loop configuration, are investigated using the $Poincar{\acute{e}}$-sphere representation. In the design process, the spectral flatness is checked quantitatively, and the tunability of the pass band is demonstrated experimentally. Theoretical calculations show that the filter also exhibits desirable dispersion and polarization properties. The orientation angles of rotatable wave plates for the wavelength tunability of the filter are obtained. Furthermore, we elaborate on the multiple angle loci produced by degeneracies through the combination of optical elements within the loop of the filter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.484-491
• /
• 2019

General Hyperspectral Image Sensor acquires an image of line form such as a thin rectangle shape because of using 1D array Push Broom or Whisk Broom scanning method. A special mechanism is required for a Hyperspectral Image Sensor to operate for nadir and slant range. To design the mechanism, the characteristics of the flight motion and the overlap rate between consecutive frames were analyzed. Also, system requirements were proposed through modeling and simulation.

• Earthquakes and Structures
• /
• v.16 no.1
• /
• pp.29-39
• /
• 2019

A three-step screening process is presented in this article for selection of consistent earthquake records in which number of suitable ground motions is quickly screened and reduced to a handful number. Records that remain at the end of this screening process considerably reduce the dispersion of structural responses. Then, an effective method is presented for spectral matching and modification of the selected records. Dispersion of structural responses is explored using different statistical measures for each scaling procedure. It is shown that the Uniform Design Method, presented in this study for scaling of earthquake records, results in most cases in the least dispersion measure.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.289-297
• /
• 2021

We describe a comb-mode resolving spectroscopic technique by direct time-domain phase correction of unstable interferograms obtained from loosely locked two femtosecond lasers. A low-cost continuous wave laser and conventional repetition rate stabilization method were exploited for locking carrier and envelope phase of interferograms, respectively. We intentionally set the servo control at low bandwidth, resulting in severe interferograms' fluctuation to demonstrate the capability of the proposed correction method. The envelope phase of each interferogram was estimated by a quadratic fit of carrier peaks to correct timing fluctuation of interferograms in the time domain. After envelope phase correction on individual interferograms, we successfully demonstrated 1 Hz linewidth of RF comb-mode over 200 GHz optical spectral-bandwidth with 10-times signal-to-noise ratio (SNR) enhancement compared to the spectrum without correction. Besides, the group delay difference between two femtosecond pulses is successfully estimated through a linear slope of phase information.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.470-477
• /
• 2022

EOTS for drones is showing another aspect of market expansion in detection and recognition areas previously occupied by artificial satellites. The two-axis EOTS for drones controls the vibration or disturbance caused by the drone during the mission so that EOTS can accurately recognize the goal. Vibration generated by drones is transmitted to EOTS. Therefore, it is essential to develop a stabilization controller that attenuates vibrations transmitted from drones so that EOTS can maintain the viewing angle. Therefore, it is necessary to standardize drone disturbance and secure the performance of EOTS disturbance attenuation controller optimized for disturbance level through this. In this paper, a method of standardizing drone disturbance applied to EOTS is studied, through which EOTS controller simulation is performed and stabilization controller shape is selected and designed.