• KSBB Journal
• /
• v.4 no.1
• /
• pp.48-56
• /
• 1989

Fermentation characteristics of Jerusalem Artichoke of yeast K.fragilis CBS 1555 were investigated experimentally and quantitatively according to the change of initial sugar concentrations and initial PHs of fermentation broth. Initial sugar concentrations employed were 26, 45, 65, 105, 180, and 215g/1. And initial PHs of fermentation broth were 3, 5.5, 7 and 9. The maximum specific growth rate was observed as 0.4hr-1 at 65g/1 of initial sugar concentration. The maximum specific alcohol production rate was 1.68g/ghr at 105g/1 of initial sugar concentration Cell yield and ethanol yield represent the maximum values such as 0.14 and 0.49 respectively when the initial sugar concentration was 25g/1. The maximum of ethano1 fermentability, 97% was obtained at the initial concentrations, 26 and 45g/1. However, the maximum of total ethanol yield productivity was 2.78g/1hr when the initial concentration was 215g/1. And also the optimum PH was found 5.5 for both specific growth rate and specific alcohol production rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.1
• /
• pp.92-95
• /
• 2001

The Baghabarighat Milk Shed Area (BMSA), in Bangladesh belonging to the Bangladesh Milk Producers Cooperative Union Limited (BMPCUL) was selected to study the qualitative and quantitative aspects of dairy milk and to establish a trend throughout the year (July 1995 to June 1990) of milk collected at morning and evening, and daily. The average fat, solids-not-fat (SNF) and total solid (TS) contents of the morning milk were 4.58, 7.75 and 12.33%, respectively, and evening milk contained 5.41, 7.81 and 13.23%. The values for the quality varied (p<0.01) throughout the year without a specific trend. Higher milk collection occured at morning (52.77%) than evening (47.24%), but total yield of fat from morning milk was lower (48.74%) than evening milk (51.26%) due to a lower fat value (4.58%). Yield of SNF (52.57% morning, 47.37% evening) followed the values of the amount of milk collected due to their similar value at morning (7.75) and evening (7.81). Overall, TS yield was 51 and 49% from morning and evening. There was not a significant (p>0.01) relationship between fat and TS values of morning milk with those of evening milk, but there was a correlation (p<0.01) between milk yield at morning and all other parameters for evening. Solids-not-fat value of morning milk was related with yield and SNF value of milk from evening, but not with fat and TS evening milk. It may be concluded that evening milk contains higher amounts of fat, SNF and TS, but yields were higher at morning, except fat. Milk collected at morning showed a relationship with all the parameters found at evening.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.79-79
• /
• 2017

Grain Sorghum varieties grown in Korea have low productivity and are constrained by the fact that farmers' choice of improved varieties is limited. Hybrid cultivars have been demonstrated to be more productive and food security than pure line varieties. However, There's no available hybrid cultivars and never planted before in Korea. This study was, therefore, conducted to determine combining ability of Korean landrace varieties and cultivar, the level of heterosis of experimental hybrids depending on environments. Two cytoplasmic male-sterile lines were crossed with six male-fertile lines in accordance with North Carolina II mating scheme to generate 12 experimental hybrids. The hybrids were evaluated in replicated row-column alpha designs at two sites in Texas and South Korea under on-season production conditions. For each trait, general combining ability (GCA) and specific combining ability (SCA) effects were estimated using the line-tester method of analysis. Results indicated significant differences among genotypes for both grain yield potential and secondary traits. Hybrids were predominant for grain yield, and displayed up to 127% heterosis of A03017 ${\times}$ Sodamchal in Korea. Positive GCA for yield was observed for Donganme, Hwanggeumchal and Jungmo4002 in Korea. Among them Jungmo4002 and Donganme had highly positive for yield (227.90 and 84.90 kg ha-1), while it showed negative GCA for yield in College station (-40.90, -189.60 kg ha-1). ATx630 ${\times}$ Sodamchal had the greatest SCA for yield (468.10 kg/ha) in College station but at South Korea its SCA effect was -302.40 kg/ha. A similar trend was observed, followed by A03017 ${\times}$ Donganme (SCA effect = 215 kg ha-1 at College station vs. -44.20 kg ha-1 at South Korea). At South Korea the greatest positive SCA effect for grain was observed in ATx630 ${\times}$ Jungmo4002 as 322.20 kg/ha. Both GCA and SCA effects significantly interacted with site effects demonstrating the need for region adaptation of potential cultivars and test for developing Korea suitable cultivar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.997-1002
• /
• 2012

With the increasing demand for lightweight materials to reduce fuel consumption, especially in the transportation industry, magnesium alloys are being widely studied. However, there are several limitations to the large-scale application of magnesium alloys in a structure because of their low formability and strong anisotropy. In order to take into account both the strong anisotropy and tension-compression asymmetry of AZ31 sheet alloy, the Cazacu-Plunkett-Barlat yield criterion (Cazacu, 2006) was adopted in material modeling. The variation of the anisotropic coefficients that describe the yield surface evolution of AZ31 is optimized using an interpolation function based on specific calibration results. It generates continuous yield surfaces, which makes it possible to describe different hardening rates in tension and compression as well as the tension-compression asymmetry of magnesium alloys. The performance of the CPB06 yield criterion for simulating an axial crushing test was tested and compared with that of the Hill (1948) yield criterion.

• Journal of Plant Biology
• /
• v.39 no.3
• /
• pp.189-195
• /
• 1996

The major cuticular components have been shown to be synthesized in the epidermis. Therefore, cloning of epidermis-specific genes could yield information to be used to isolate and characterize the enzymes involved in the cuticle biosynthesis. A subtractive cDNA library was prepared from Senecio odorus in which epidermis-specific cDNAs were enriched. Differential screening of the library using epidermal and non-epidermal probes revealed two cDNAs. One of them designated epi425 was identified, based on the sequence homology, as a member of a new class in the LTP gene family and the other clone designated epi23 as a gene encoding an aldehyde decarbonylase. Northern blot analyses showed that epi425 and epi23 cDNAs hybridized with a transcript of about 600 and 2, 100 nucleotides, respectively, from the epidermis but not from the non-epidermal tissues. Further characterization of these clones will provide more information on the mechanism of the cuticle biosynthesis.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• Management & Information Systems Review
• /
• v.24
• /
• pp.1-24
• /
• 2008

This paper examines the direct effects of board independence and also its interaction effects with CEO's firm specific experience on firm performance. The findings in an hierarchial regression analysis of multiyear sample of computer hardware companies indicate that independent, outsider directors are beneficial to firms' performance when CEO has high-level of firm specific experience whereas it is harmful when CEO has low-level of firm specific experience. However, separating the positions of board chair and chief executive officer that has been used as another means for increasing board independence does not influence to firms' performance. These findings imply that researchers in corporate governance should reconsider the relative weight placed on directors' monitoring and assistance role. Rather than focusing predominantly on directors' willingness or ability to control executives, in future research scholars should yield more productive results by focusing on the assistance directors provide in bringing valued resources to the CEOs and in serving as a source of advice and counsel especially for CEO's improvement of management technique. In addition, they should pay more attention on identifying intervening processes between board and firm performance in order to provide optimal governance mechanisms and configurations to practitioners.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.299-311
• /
• 2006

In this paper it is outlined the methodology of estimating the parameters of water balance analysis method for calculating recharge, using ground water level rises in monitoring well when values of specific yield of aquifer are not available. This methodology is applied for two monitoring wells of the case study area in northern area of the Jeiu Island. A water balance of soil layer of plant rooting zone is computed on a daily basis in the following manner. Diect runoff is estimated by using SCS method. Potential evapotranspiration calculated with Penman-Monteith equation is multiplied by crop coefficients($K_c$) and water stress coefficient to compute actual evapotranspiration(AET). Daily runoff and AET is subtracted from the rainfall plus the soil water storage of the previous day. Soil water remaining above soil water retention capacity(SWRC) is assumed to be recharge. Parameters such as the SCS curve number, SWRC and Kc are estimated from a linear relationship between water level rise and recharge for rainfall events. The upper threshold value of specific yield($n_m$) at the monitoring well location is derived from the relationship between rainfall and the resulting water level rise. The specific yield($n_c$) and the coefficient of determination ($R^2$) are calculated from a linear relationship between observed water level rise and calculated recharge for the different simulations. A set of parameter values with maximum value of $R^2$ is selected among parameter values with calculated specific yield($n_c$) less than the upper threshold value of specific yield($n_m$). Results applied for two monitoring wells show that the 81% of variance of the observed water level rises are explained by calculated recharge with the estimated parameters. It is shown that the data of groundwater level is useful in estimating the parameter of water balance analysis method for calculating recharge.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.110-116
• /
• 1988

The response of forage yield was studied with various growth indices to develop yield model and to determine optimum cutting time in three cultivars of orchardgrass. 1. Number of tiller per plant was the highest at 3rd cutting stage. But, it was decreased rapidly at 4th cutting stage. Leaf Area Index (LAI) was the highest at 3rd cutting stage. LAI was increased slowly during 15 days to 20 days after cutting and thereafter increased rapidly. 2. In dry matter yield over cutting stages, 1st cutting and 3rd cutting stages were higher yield than others. Change of dry matter yield was similar to that of LAI in all cutting stages. 3. Leaf Elongation Rate (LER) and Specific Leaf Weight (SLW) were reached to maximum at 20 to 25 days and 25 to 30 days after cutting, respectively. 4. Dry matte yield was highly correlated with LAI (r-0.905)and with CGR (r-0.962) over three cultivars. Also, LAI was significantly with LER. The best-fit yield model was obtained in multiple regression equation which included both dependent variables of LAI and CGR. 5. Optimum cutting times which were determined by the relationships between D.M. yield and LAI, and between D.M. yield and CGR, were ranged from 32 days to 36 days depend on each cutting stages.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.110-116
• /
• 1988

The response of forage yield was studied with various growth indices to develop yield model and to determine optimum cutting time in three cultivars of orchardgrass 1. Number of tiller per plant was the highest at 3rd cutting stage. But, it was decreased rapidly at 4th cutting stage. Leaf Area Index (LAI) was the highest at 3rd cutting stage. LA1 was increased slowly during 15 days to 20 days after cutting and thereafter increased rapidly. 2. In dry matter yield over cutting stages, 1st cutting and 3rd cutting stages were higher yield than others. Change of dry matter yield was similar to that of LA1 in all cutting stages. 3. Leaf Elongation Rate (LER) and Specific Leaf Weight (SLW) were reached to maximum at 20 to 25 days and 25 to 30 days after cutting, respectively, 4. Dry matter yield was highly correlated with LA1 (r=0.905)and with CGR (r=0.962) over three cultivars. Also, LA1 was significantly with LER. The best-fit yield model was obtained in multiple regression equation which included both dependent variables of LA1 and CGR. 5. Optimum cutting times which were determined by the relationships between D.M. yield and LAI, and between D.M. yield and CGR, were ranged from 32 days t o 36 days depend on each cutting stages.