• 동력기계공학회지
• /
• 제19권2호
• /
• pp.90-95
• /
• 2015

Recently worldwide concern and research is being actively conducted on green energy which can reduce environmental pollution. A plant such as the natural rapeseed oil, soybean oil, palm, etc. is used as a bio source in home and industry. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel, and it can be applied to the conventional diesel engine without changing the existing institutional structure. Waste vegetable oil contains a high cetane number and viscosity component, the low carbon and oxygen content. A lot of research is progressing about the conversion of waste vegetable oil as renewable clean energy. In this study, waste oil was prepared to waste cooking oil generated from the living environment, and applied to diesel engine to confirm the possibility and cost-effectiveness of biodiesel blend waste oil. As a result, brake specific fuel consumption and NOx was increased, carbon monoxide and soot was decreased.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.379-385
• /
• 2011

One of main catalysts for De-NOx in SCR is a $V_2O_5/TiO_2$, and this work formulated powdery catalysts focusing ultimately on corrugate catalytic support. The prepared catalyst consisted of anatase $TiO_2$. Amount of the added vanadium oxide determined the viscosity of catalyst slurry, which is important for washcoat for a final corrugate type catalytic reactor. The test showed a proportional relation between adsorption amount of ammonia and specific surface area. De-NOx efficiency could be obtained up to 96.3 % at $400^{\circ}C$ with a spacial velocity of $4,000hr^{-1}$.

• 한국식품조리과학회지
• /
• 제6권2호
• /
• pp.59-66
• /
• 1990

The characteristics of sponge cakes containing sucrose or other sweeteners for diabetes mellitus patients were investigated through physical measurement and sensory evaluation. The results are as follows: The physical properties of cake batters and cakes with sweeteners were different from each other in viscosity, specific gravity, standing height, firmness, and springiness. from the result of sensory evaluation, it was shown that cakes containing sorbitol and fructose had high quality even though they were not as good as cake with sucrose. However, cakes with saccarine and stevioside showed much difference compared with cake with sucrose. The characteristics of sponge cake with combined sweeteners (sorbitol plus stevioside) were compairable to those of sucrose cake. There was little difference in specific gravity. The result of sensory evaluation indicated the combined use of both sweetenes could produce bette cakes than either stevioside or sorbitol. Practical utilization of this cake would be provided under the sensory evaluation on these cakes by diabetes mellitus patients.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.860-865
• /
• 2006

The quality parameters of sponge cake supplemented with soy protein concentrate (SPC) were evaluated. The addition of SPC to wheat flour increased the protein content and alkaline water retention value, but decreased the sedimentation value. Protein content had a positive correlation with the alkaline water retention value, and a negative correlation with the sedintentation value. The higher the concentration of SPC, the higher the RVA pasting temperature and the lower the viscosity. Increasing the level of SPC in flour led to a decrease in mixogram peak time, whereas peak height, width at peak, and width at 8 min progressively increased. As the amount of SPC increased in the formulation, the pH and specific gravity of cake batter increased, whereas the volume and specific volume of sponge cake decreased. The total isoflavones content in SPC increased after heat treatment. The hardness, gumminess, and chewiness increased progressively in accordance with increasing level of SPC.

• 에너지공학
• /
• 제24권2호
• /
• pp.79-83
• /
• 2015

Hydrogen has long been recognized as a fuel having some unique and highly desirable properties, for application as a fuel in engines. Hydrogen has some remarkably high values of the key properties for transport processes, such as kinematic viscosity, thermal conductivity and diffusion coefficient, in comparison to those of the other fuels. Such differences together with its extremely low density and low luminosity help to give hydrogen its unique diffusive and heat transfer characteristics. The thermodynamic and heat transfer characteristics of hydrogen tend to produce high compression temperatures that contribute to improvements in engine efficiency and lean mixture operation.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.8-24
• /
• 1999

free volume in polymers is defined as the difference of the specific volume and the volume which is not available for the particular molecular motion which is responsible or the process that is considered . Relations between free volume and viscosity free volume and diffusion coefficient are pre-sented both in the case of simple low molecular weight liquids and in the case of polymers. Molecular models and free volume models are reminded starting from the equilibrium state equation of Simha and Somcynski. The non equilibrium situations of specific volume of glass polymers below Tg are shown introducing different relaxation volume equations which involve different material's parameters and con-cept of the fictitious temperature. The diffusivity equations of Vrentas and Duda are introduced both for the glassy and rubbery states. The possibility of introducing time relaxation functions is also suggested. The importance of finding experimental evidences of the free volume is stressed. highlights of the free volume measurement methods are given in particular as to dilatometry photocromy fluorescence electron spin resonance small angle X-ray scattering positron annihilation spectroscopy.

• Nuclear Engineering and Technology
• /
• 제8권3호
• /
• pp.145-150
• /
• 1976

한천 원조인 꼬시레기를 여러 가지 선량의 코발트 60 감마선으로 조사하고 이에서 추출한 한천의 수율 및 특성을 조사하였으며 방사선조사한 한천분말의 품질과 비교하였다. 방사선조사한 원조에서의 한천의 수율은 조사선량이 2 Mrad 까지 상승됨에 따라 증가하였고 그 이상에서는 약간 감소하는 경향이었다. 한천의 젤화능력, 젤화점, 젤견고성 및 비점도는 1 Mrad까지 증가하였고 그이상에서는 감소하였으며 융점, 전질소, 조회분, 전유황 함량은 1 Mrad 까지 감소하였고 그 이상에서는 변화가 완만하였다. 시판용 한천분말의 방사선조사는 젤화능력, 비점도, 젤견고성의 급격한 감소와 젤화점, 융점의 완만한 감소를 가져왔다. 한천시료의 특성의 변화패던의 한천을 유리상태 또는 결합상태(해조중 존재형태)에서 조사하는가에 따라 달리 나타났다.

• 대한화학회지
• /
• 제19권5호
• /
• pp.289-293
• /
• 1975

Dodecyl pyridinium chloride(DPC) 水溶液의 粘性度 및 密度硏究로 이 溶液에는 第一 cmc 外에 第二 cmc가 存在함을 알 수 있었다. 水化된 미셀의 부피分率${\phi}_m$은 다음 式에 따라 算出하였다. ${\Pi}_{rm}=1+2.5{\phi}_m+14.1{\phi}_m^2{\cdot}{\phi}_m-C_m$ 曲線에서 ${\phi}_m$m의 增加率은 第二 cmc 近處에서 減少되고 또 密度測定으로부터 얻은 partial specific volume($\={v}$)도 第二 cmc 近處에서 급격히 減少되고 그以上의 濃度에서는 一定値를 維持함을 알았다. 이것은 미셀의 集合型의 變化 및 미셀과 結合하고 있는 반대이온의 減少로 因한 第二 cmc에서의 미셀構造變化에 依한 것이라고 생각된다.

• KCI Concrete Journal
• /
• 제14권3호
• /
• pp.121-129
• /
• 2002

This study investigates experimentally into the design factors and quality variations having an effect on the properties of the combined high flowing concrete to be poured in the slurry wall of Inchon LNG in-ground receiving terminal. Especially, high belite cement and lime stone powder as cementitious materials and viscosity agent in order to improve self-compaction and hydration heat are used in this study. Water-cement ratio(W/C), fine aggregate volume ratio(Sr) and coarse aggregate volume ratio(Gv) as design factors of the combined high flowing concrete are applied to determine the optimum mix design proportion. Also quality variations for sensitivity test are selected items as followings. (1)Surface moisture(5cases) and (2)Fineness modulus of fine aggregate(5cases), (3)Concrete temperature(3cases), (4)Specific surface(3cases) and particle size of lime stone powder. As experimental results, water-cement ratio, fine and coarse aggregate volume ratio are shown as the optimum range 51%, 43% and 53% separately considering site condition of slurry wall. Also quality factors by sensitivity test should be controlled in the following ranges. (1) Surface moisture :to.67% and (2)Fineness modulus 2.6$\pm$0.2 of fine aggregate, (3)Concrete temperature l0-20t, (4) Specific surface 6,000$\textrm{cm}^2$/g and particle size 9.7$\pm$1.0${\mu}{\textrm}{m}$ of lime stone powder. Based on the results of this study, the optimum mix design proportion of the combined high flowing concrete are selected and poured successfully in the slurry wall of LNG in-ground tank.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.6-11
• /
• 2007

The rheological properties of slag cement pastes by effect of particle size distribution of binder were investigated using a Rheostress 1 rheometer (Haake) with a cylindrical spindle and the relationship between fluidity particle size distribution using the Rosin-Rammler equation. Samples are combined the two types of slag powder and OPC, fine slag particles sized Elaine specific surface area $8,000cm^2/g$, coarse slag particles sized Elaine specific surface area $2,000cm^2/g$, intermediate OPC particles $3,450cm^2/g$, used to search for the combination that would yield the best quality product. The all flow curves which were measured by rheometer showed hysterisis and could be classified into 4 types. When the combination was based on a ratio of 15-20 vol% fine particles, 40-50 vol% intermediate particles, 30-40 vol% coarse particles of the total volume, a high fluidity and low yield-strength was achieved. The Rosin-Rammler function can explain aboved correlation flow curve types. On type 1, the n-value had a correlation with plastic viscosity however the blend of type 2 and 3 showed consistent n-value regardless of plastic viscosity. In addition, the blend in type 4 tended to a rise in fluidity according to the increase of the n-value.