• Structural Engineering and Mechanics
• /
• v.78 no.2
• /
• pp.135-143
• /
• 2021

In this study, continuous contact problem in the functionally graded (FG) layer loaded with a FG flat punch resting on the elastic semi-infinite plane was analyzed by the finite element method (FEM). It was assumed that the shear modulus and density of the layer and punch varied according to exponentially throughout their depth. FG layer's weight was included to the problem and additionally all surfaces were considered as frictionless. Analysis of FG materials was performed with a special macro which was added to the ANSYS program. Firstly, the shear modulus of the punch was considered to be very rigid and the results of initial separation load (λcr) and distance (xcr) were compared with the analytical solution. Afterwards, results obtained from the contact analysis made according to the inhomogeneity parameters (β, γ) between FG punch-FG layer which had been unprecedented in the literature were discussed. As a result, FG punch's stress values at the punch edges where stress accumulations occurred were found to be smaller than the rigid punch. The security of the structure, longer life of the material and ease of production are directly related to the reduction of the stress values. The results obtained in this study are important in this respect. Also this work is the first study that investigates the effect of FG punch on the FG layer.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2018

This research investigated the mechanical properties of the 4 different types of $3{\times}3$ cable stitches on weft knitted fabrics. The 4 kinds of cable-stitch fabrics were knitted under the same knitting conditions, then the mechanical properties, such as tensile strength, elongation, stiffness, etc. were measured according to the Korean Industrial Standards (KS K 0642). The knitting time for the sample produced by the knitting process 1 was the shortest among the 4 different types of samples. It means that the knitting process 1 would have benefits of higher productivity if there is no yarn breakage during the knitting of the cable stitches. In the test for tensile strength, the samples produced by knitting processes 3 and 4 have tensile values of approximately 8~11% higher than the sample produced by knitting process 1. The test for elongation also shows that the samples produced by knitting processes 3 and 4 have up to 18% higher elongation values than the sample produced by knitting process 1. On the other hand, the stiffness test showed no significant difference between the 4 samples. This study is expected to increase the competitiveness of the local knitting industry as a result of providing basic data on the mechanical properties of special knitted stitches, such as cable stitches.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.8-14
• /
• 2019

Many electrical socket-outlet fire accidents take place not only in homes but in the offices each year. The causes are mostly faulty constructions, managerial problems and carelessness. Construction and managerial flaws can be resolved by regular or special inspections, but carelessness is not solvable through inspections. Such carelessness can be related to the consumption capacity of electrical socket-outlets presently, the rated current of electrical socket-outlets is based on 16A. However, even at 16A, the heat generated in the insulator of an electrical socket-outlet varies due to such factors as part damage and environmental conditions of use. To explore this situation, the study conducted an experiment to analyze thermal relationship by applying 10A, 20A, and 30A currents. To secure reliability, the study employed thermal analysis simulation and compared the thermal relationship in the same current value. The experimental and simulation values were found to be similar and therefore, diverse current values were replaced with the simulation. At 30A, the temperature was found to rise to at least $169.9^{\circ}C$ which had worked as a sufficient amount of energy to bring the insulation aging of insulator.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.6
• /
• pp.996-1011
• /
• 2023

This study introduces an effective marketing strategy for fashion SMEs and small designer brands utilizing Instagram as a social networking platform. The research compared the impact of two information delivery types (native advertisements vs. live streaming after native ads) and two types of promotional messages (scarcity vs. price discount) on SNS consumption value, and product attitude toward fashion designer brands. The study involved surveying 251 Korean women aged 25-55 with experience in buying designer products and using SNS. Data analysis was conducted using SPSS 26.0 and Process Macro v3.5. Results indicated that both native advertisements and live streaming enhance economic and social values in SNS consumption. Live streaming with price discount messages generates higher perceived SNS consumption values compared to scarcity messages. Consumers showed a more favorable attitude toward designer brand products when watching the live streaming of price discount messages rather than scarcity messages. The findings emphasize that the broadcast host actively induced participation to reveal viewers' social presence through comments or emphasized discount messages such as ultra-special prices during live streaming on Instagram.

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.295-299
• /
• 2019

Purpose: This clinical pilot study was performed to determine the effectiveness of dual-energy cone-beam computed tomography (DE-CBCT) in measuring bone mineral density (BMD). Materials and Methods: The BMD values obtained using DE-CBCT were compared to those obtained using calibrated multislice computed tomography (MSCT). After BMD calibration with specially designed phantoms, both DE-CBCT and MSCT scanning were performed in 15 adult dental patients. Three-dimensional (3D) Digital Imaging and Communications in Medicine data were imported into a dental software program, and the defined regions of interest (ROIs) on the 3-dimensional surface-rendered images were identified. The automatically-measured BMD values of the ROIs (g/㎤), the differences in the measured BMD values of the matched ROIs obtained by DE-CBCT and MSCT 3D images, and the correlation between the BMD values obtained by the 2 devices were statistically analyzed. Results: The mean BMD values of the ROIs for the 15 patients as assessed using DE-CBCT and MSCT were 1.09±0.07 g/㎤ and 1.13±0.08 g/㎤, respectively. The mean of the differences between the BMD values of the matched ROIs as assessed using DE-CBCT and calibrated MSCT images was 0.04±0.02 g/㎤. The Pearson correlation coefficient between the BMD values of DE-CBCT and MSCT images was 0.982 (r=0.982, P<0.001). Conclusion: The newly developed DE-CBCT technique could be used to measure jaw BMD in dentistry and may soon replace MSCT, which is expensive and requires special facilities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.515-521
• /
• 2015

The SymMerge algorithm is an efficient merging algorithm for input sequences u and v of sizes $\left|u \right|=m$ and $\left|v \right|=n$, $m{\leq}n$. We consider complexity analysis for SymMerge algorithm regarding to the required number of comparisons. The focus of the previous complexity analysis was on finding the values of upper bounds, i.e. showing the asymptotical optimality. In this paper, in a different way from the previous complexity analysis, we show that the overall required number of comparisons for two representative special cases "symmetric case" and "maximum spanning case" can be calculated exactly i.e. the least upper bounds regarding to the required number of comparisons are calculated. Symmerge requires exactly $m\;log\frac{n}{m}+4m-logm-3$ comparisons for symmetric case of sizes $m=2^k,\;n=2^l,l{\geq}k$ of input sequences and exactly $\frac{1}{2}m^2+(m+1)logm-\frac{3}{2}m+2$ comparisons for maximum spanning case of sizes $m=2^k,n=2^m-m$ of input sequences. Additionally we show that the complexity of the Symmerge algorithm regarding to the overall required number of comparisons for these special cases can be defined by recurrence relations.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.43-50
• /
• 2014

The purpose of study was to analyze secreted nectar volume, nectar sugar content and amino acid in addition to estimating honey quantities that can ultimately reap in male and female flowers of Evodia daniellii Hemsl.. The maximum blooming period of male flowers was on 24 to 26 July in 2012. On average, nectar volume secreted by nectary was $2.73{\pm}0.73{\mu}L$ from one male flower and nectar concentration showed 17.4%. The maximum blooming period of female flowers was on 7 to 9 August in 2012. Nectar volume secreted by nectary was $0.63{\pm}0.49{\mu}L$ from one female flower and nectar concentration showed 25.7%, averagely. As results of correlation analysis between the meteorological factors and nectar characteristics, we found that nectar quantities and concentration were influenced by temperature and relative humidity. Sugar content was calculated at $48.0{\pm}5.2{\mu}g$ per a male flower and $37.8{\pm}8.7{\mu}g$ per a female flower, which meant that both values were not significantly different (Mann-Whitney's U-test, p=0.400). The minimum estimates of honey harvest for a male and female inflorescence were 67.8 g and 53.5 g, respectively. Analysis of amino acid showed that Serine, Glycine and Alanine were more abundant in male flowers, however Asparatate, Glutamate, Asparagine and Glutamine were more abundant in female flowers.

• Earthquakes and Structures
• /
• v.16 no.2
• /
• pp.221-234
• /
• 2019

Today, many important concrete face rockfill dams (CFRDs) have been built on the world, and some of these important structures are located on the strong seismic regions. In this reason, examination and monitoring of these water construction's seismic behaviour is very important for the safety and future of these dams. In this study, the nonlinear seismic behaviour of Ilısu CFR dam which was built in Turkey in 2017, is investigated for various reservoir water heights taking into account 1995 Kobe near-fault and far-fault ground motions. Three dimensional (3D) finite difference model of the dam is created using the FLAC3D software that is based on the finite difference method. The most suitable mesh range for the 3D model is chosen to achieve the realistic numerical results. Mohr-Coulomb nonlinear material model is used for the rockfill materials and foundation in the seismic analyses. Moreover, Drucker-Prager nonlinear material model is considered for the concrete slab to represent the nonlinearity of the concrete. The dam body, foundation and concrete slab constantly interact during the lifetime of the CFRDs. Therefore, the special interface elements are defined between the dam body-concrete slab and dam body-foundation due to represent the interaction condition in the 3D model. Free field boundary condition that was used rarely for the nonlinear seismic analyses, is considered for the lateral boundaries of the model. In addition, quiet artificial boundary condition that is special boundary condition for the rigid foundation in the earthquake analyses, is used for the bottom of the foundation. The hysteric damping coefficients are separately calculated for all of the materials. These special damping values is defined to the FLAC3D software using the special fish functions to capture the effects of the variation of the modulus and damping ratio with the dynamic shear-strain magnitude. Total 4 different reservoir water heights are taken into account in the seismic analyses. These water heights are empty reservoir, 50 m, 100 m and 130 m (full reservoir), respectively. In the nonlinear seismic analyses, near-fault and far-fault ground motions of 1995 Kobe earthquake are used. According to the numerical analyses, horizontal displacements, vertical displacements and principal stresses for 4 various reservoir water heights are evaluated in detail. Moreover, these results are compared for the near-fault and far-faults earthquakes. The nonlinear seismic analysis results indicate that as the reservoir height increases, the nonlinear seismic behaviour of the dam clearly changes. Each water height has different seismic effects on the earthquake behaviour of Ilısu CFR dam. In addition, it is obviously seen that near-fault earthquakes and far field earthquakes create different nonlinear seismic damages on the nonlinear earthquake behaviour of the dam.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.845-856
• /
• 2020

This study proposes a bridge evaluation system for indivisible permit vehicles such as hydraulic cranes. The permit loads for the bridge evaluation are divided into three categories: routine permit loads, special permit 1 loads, and special permit 2 loads. Routine permit and special permit 1 vehicles are allowed to cross a bridge with normal traffic. For these two permits, the standard lane model in the Korean Highway Bridge Design Code was adopted to consider normal traffic in the same lane. Special permit 2 vehicles are assumed to cross a bridge without other traffic. Structural analyses of two prestressed-beam bridges and two steel box girder bridges were conducted for the proposed permit loads. The rating factors of the four bridges for all permit loads were calculated as sufficiently large values for the moment and shear force so that crossing the bridges can be permitted. A reliability assessment of the bridges was performed to identify the reliability levels for the permit vehicles. It was confirmed that the reliability level of the minimum required strength obtained by the load-resistance factors yields the target reliability index of the design code for the permit vehicles.

• Journal of the Daesoon Academy of Sciences
• /
• v.45
• /
• pp.153-186
• /
• 2023

Since the 2000s, Korean society has been transitioning into a multicultural society with a sharp increase in the influx of various non-Koreans including immigrant workers, immigrant spouses, international students, and refugees. As a result, Korea, which had maintained religious peace and coexistence as a multi-religious society, is showing signs of increased risks of social problems such as the surfacing of conflicts between religions. Religion can contribute to the integration and safety of communities in the process of becoming a multicultural society, but at the same time, it requires discussion from an educational perspective because of its ambivalence in potentially causing conflict within communities. Considering that one of the main functions of religion is social integration, religious education is required for the stable settlement of multicultural societies. In recognition of this, discussion regarding a new perspective on religious education is needed to respond to religious diversity and to understand the current society and the means of becoming a global citizen. This new discussion would be a 'general religious education' model that provides an education covering various religious and non-religious worldviews in order to cultivate 'religious literacy.' However, in a multicultural society, while general religious education may be useful in reducing prejudice and discrimination among students in an integrated environment, it should also be recognized that a 'special religious education' would be needed to acknowledge the unique values of each human group. This would be the most effective approach to multiculturalism. Therefore, this study proposes a form of 'cooperative religious education,' which combines general religious education and special religious education as a direction for religious education. In providing readers with background context, this study will review Korean religious policies and religious education, and then present realistic methods that can be implemented in schools.