• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.20-27
• /
• 2015

The juice carrier is the first ship built in korea. Special refrigerator system and cargo hold insulation with stainless steel tank were equipped on cargo hold. We studied optimum design of cargo hold insulation for reducing of ship building schedule and cost including good quality with refrigerating efficiency. From this study, general and newly specified juice carrier, technical method of cargo hold insulation system, air flow with division air wall, K-value calculation have been investigated.

• 한국중재학회지:중재연구
• /
• 제13권2호
• /
• pp.377-401
• /
• 2004

Delay in the air transport occurs when passengers, baggage or cargo do not arrive at their destination at the time indicated in the contract of carriage. The causes of delay in the carriage of cargo are no reservation, lack of space, failure to load the cargo on board, loading the cargo on the wrong plane, failure to off-load the cargo at the right place, or to deliver the covering documents at the right place. The Montreal Convention of 1999 Article 19 provides that "The carrier is liable for damage occasioned by delay in the carriage by air of cargo. Nevertheless, the carrier shall not be liable for damage occasioned by delay if it proves that it and its servants and agents took all measures that could reasonably be required to avoid the damage or that it was impossible for it or them to take such measures." The Montreal Convention Article 22 provides liability limits of the carrier in case of delay for cargo. In the carriage of cargo, the liability of the carrier is limited to 17 SDR per kilogram unless a special declaration as to the value of the cargo has been made. The Montreal Convention Article 19 has shortcomings: it is silent on the duration of the liability for carriage. It does not give any indication concerning the circumstances to be taken into account in cases of delay, and about the length of delay. In conclusion, it is desirable to define the period of carriage with accuracy, and to insert the word 'unreasonable' in Article 19.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.95-100
• /
• 2011

In general, thickness of bottom floor in fore/aft cargo hold region for container ship has been determined based on FEM analysis result of mid cargo hold region. But this approach has room for improvement because section shape and frame spacing in fore/aft cargo hold of container ship are quietly different from those of mid cargo hold. From this study, correlation between FEM result and grillage analysis result has been investigated and simple method for thickness determination of bottom floor in fore/aft cargo hold using newly improved grillage analysis is proposed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.363-366
• /
• 2006

Various kinds of ships(Cargo ship, Passenger ship, Training ship, Special ship etc.) are operated to transport cargo or passengers at sea in the world. Most of the important auxiliary machinery which is installed are fluid machinery in those ships. A large percentage of fluid machinery is pumps which are classified turbo and non-turbo type. While much previous research has focused on pumps for shore use, very little is known about ship's pump. In order to develop an understanding of ship's pump, we introduce common pumps used in every ship and special pumps based on ship's type. This exploratory study lays the groundwork for further investigation of ship's pumps

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.47-50
• /
• 2011

E/R bulkhead is watertight bulkhead between engine room and cargo hold. So, it must have sufficient strength about cargo load of aft hold. Especially, partial stringer deck between tank top and $2^{nd}$ deck of engine room must have sufficient strength because it has function of primary supporting member. Generally, cargo hold structure is verified through the direct calculation as finite element analysis of cargo hold, but engine room structure doesn't perform it. Therefore, we have performed finite element analysis of engine room stringer deck which considered cargo hold load. And then, it will be able to apply similar ship design.

• 한국항해항만학회지
• /
• 제36권10호
• /
• pp.803-810
• /
• 2012

냉동컨테이너 화물의 해상운송이 증가함에 따라 냉동컨테이너 화물의 손상과 관련된 분쟁 및 클레임이 화물 소유자인 화주와 화물운송의 주체인 운송인 간에 빈번하게 발생하고 있는 실정이다. 냉장 냉동화물은 그 특성상 다른 일반화물에 비해 화물손상에 대한 분쟁 및 클레임이 많은 편이며, 일단 화물손상이 발생하면 관련 당사자들에게 분쟁이나 클레임으로 인한 불필요한 시간낭비 및 물류비용 즉, 손상화물의 검사비용, 손상화물의 폐기비용, 클레임관련 소송비용 등 불필요한 경제적 비용을 증가시킨다. 따라서 본 연구의 목적은 냉동컨테이너 화물손상의 개선방안을 모색하여 해상으로 운송되고 있는 냉동컨테이너 화물의 손상을 사전에 예방해 화물손상으로 인한 불필요한 물류비용 및 시간낭비를 감소시킴과 동시에 냉동컨테이너 화물을 목적지까지 보다 안전하고 효율적으로 운송하여 원활한 물류흐름에 기여하는데 있다.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.49-58
• /
• 2014

Variability factors of transship cargo in the container transportation market analysis short term factors. In the past, studies on the factor of variability in container cargo volume have focused on long term volume forecast and increase in investment and competitiveness from strategic perspectives. Unlike previous studies, this paper analyzes factors of variability in transshipment volume rapidly varying in short term and seeks measures. Since it was identified that transshipment volume depends on vessel operation cost and port volume in long term but effectively on special strategies launched by port authorities in short term, the port authority experienced rapid drop in volume should continue to observe strategies of competition ports and to make use of strategies seeking appropriate countermeasures.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.17-20
• /
• 2011

The International Association of Classification Societies (IACS) had developed the Common Structural Rules (CSR) for bulk carriers as per the needs noted above. ISO and IMO GBS (Goal-Based Standards) are now being developed in this regard. This study has been prepared to verity the strength of forward cargo hold of 82,000 DWT class bulk carriers. A cargo hold/tank 3-D FE model was established to assess the structural adequacy of the primary structural members with the loading conditions. Full breadth model was established for the analysis considering asymmetric nature of structural layout and loading conditions. To summarize this result of structural assessment based on IACS CRS for bulk carrier, it is benefit to design this kind of bulk carriers and to study the strength assessment for the similar type of bulk carriers.

• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.881-888
• /
• 2019

국가 간 무역거래 중 해상운송의 위험화물에 대한 비중이 늘어나는 추세이며 위험화물의 종류와 형태는 매우 다양해지고, 복잡해지면서 범위 또한 넓게 확장되고 있다. 이런 이유로 운송수단인 선박과 다른 화물의 안전을 위협하게 될 사고의 위험성은 증가하게 됨은 물론이고 심각한 피해를 발생 시킨다. 운송인은 위험화물에 대한 특별한 관리와 취급을 필요로 하며 안전한 운송을 위하여 주의의무가 있다. 따라서 송하인은 선적하기 전에 위험화물의 성질과 특성을 운송인에게 통지할 의무가 있으며 통지여부에 따라 운송인의 책임이 달라진다. 본 연구에서는 위험화물의 개념과 분류 및 국제해상운송규범인 헤이그 규칙, 함부르크 규칙과 로테르담규칙의 운송인의 위험화물 책임에 관한 조항을 비교, 분석하고 사례 분석 후, 국제해상운송에 있어 위험화물 취급, 관리자인 운송인에게 정보를 제공하는데 목적을 두고자 한다.

• 무역상무연구
• /
• 제20권
• /
• pp.213-239
• /
• 2003

This paper intends to describe the liability regime of the air carrier under the Montreal Convention of 1999 for the international cargo, comparing to those of the existing Warsaw Convention system. Also this paper deals with main issues of the Montreal Convention which are relevant for the carrier's liability in the carriage by air of cargo. The Warsaw Convention was adopted in 1929 and modified successively in 1955, 1961, 1971, 1975, and 1999. The Montreal Convention of 1999 modernized and consolidated the Warsaw Convention and related instruments. International air carrier is liable by application of principle of strict liability as stated in the Montreal Convention : The carrier is liable for the destruction or loss of, or damage to cargo and delay during the carriage by air, and the carrier's liability is limited to a sum of 17 Special Drawing Rights per kilogramme. However, the Montreal Convention has main outstanding issues with respect to the liability of the air carrier : potential conflicts between the Montreal Convention and the Warsaw Convention, the amounts of limits of the carrier's liability, the duration of the carrier's liability, the exessive litigation, and the aviation insurance. Therefore, the conditions and limits of the carrier's liability under the Montreal Convention should be readjusted and regulated in detail.