• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.195-197
• /
• 2005

In the scalable extension of H.264/AVC, spatial scalability is provided residual information as encoding layered spatial resolution between layers. We use the inter-layer prediction to remove this redundancy. In the inter-layer prediction, as the prediction we can use the signal that is the upsampled signal of the lower resolution layer. In this case, coding efficiency can be different from optimal prediction by kinds of interpolation filter. This paper indicates technique to choose the interpolation filter and to enhance coding efficiency for finding more correct prediction in intra macroblock.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.189-191
• /
• 2005

In the scalable extension of H.264/AVC, the codec is based on a layered approach to enable spatial scalability. In each layer, the basic concepts of motion compensated prediction and intra prediction are employed as in standard H.264/AVC. Additionally inter-layer prediction algorithm between successive spatial layers is applied to remove redundancy. In the inter-layer prediction, as the prediction we can use the signal that is the upsampled signal of the lower resolution layer. In this case, coding efficiency can be variable as the kinds of interpolation filter. In this paper, we investigate the approach to select the interpolation filter for residual signal in order to optimal prediction.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1365-1367
• /
• 2003

A new method, called dynamic space projection method that is suitable to remote sensing image, is adopted to encrypt GCP (ground control point) datum in this paper. The essence of this method is to encrypt enough GCP by using a few known GCP in order to realize the precise correction of remote sensing image. By making use of the method to the GCP datum encrypting and precise geometric correction of TM image and SPOT image, the precision of encrypted GCP is less than one pixel, the precision of precisely corrected image is less than two pixels.

• 한국지리정보학회지
• /
• 제21권1호
• /
• pp.1-11
• /
• 2018

MMS(Mobile Mapping System) 자료를 이용한 정밀 공간 정보 매핑은 고정밀 3차원 지형 모델 구축, 시설물 관리를 위해 중요하며, 특히 도로 중앙선 매핑 작업은 정밀 도로 지도 구축을 위해 필요하다. 본 연구에서는 MMS LiDAR(Light Detection And Ranging) 자료를 이용하여 정밀 공간 정보인 도로 중앙선을 매핑 하는 반자동화 방법을 개발하였다. 우선 주어진 MMS LiDAR 자료를 기반으로 보간법을 이용하여 반사강도 영상을 제작하고, 에지 검출기를 이용하여 반사강도 영상으로부터 선형 세그먼트들을 추출하였다. 최종적으로 추출된 선형 세그먼트들 중에서 도로 중앙선 세그먼트를 수동으로 선택하였다. 추출된 도로 중앙선의 정확도 검증 결과, 0.065m의 정확도를 보여주었으며, 도로 중앙선이 도로 신호와 인접한 일부 지역에서 에러가 발견되었다.

• 한국농림기상학회지
• /
• 제6권3호
• /
• pp.149-163
• /
• 2004

Evapotranspiration (ET) is a critical component of the hydrologic cycle which influences economic activities as well as the natural ecosystem. While there have been numerous studies on ET estimation for homogeneous areas using point measurements of meteorological variables, monitoring of spatial ET has not been possible at landscape - or watershed - scales. We propose a site-specific application of the land surface model, which is enabled by spatially interpolated input data at the desired resolution. Gyunggi Province of South Korea was divided into a regular grid of 10 million cells with 30m spacing and hourly temperature, humidity, wind, precipitation and solar irradiance were estimated for each grid cell by spatial interpolation of synoptic weather data. Topoclimatology models were used to accommodate effects of topography in a spatial interpolation procedure, including cold air drainage on nocturnal temperature and solar irradiance on daytime temperature. Satellite remote sensing data were used to classify the vegetation type of each grid cell, and corresponding spatial attributes including soil texture, canopy structure, and phenological features were identified. All data were fed into a standalone version of SiB2(Simple Biosphere Model 2) to simulate latent heat flux at each grid cell. A computer program was written for data management in the cell - based SiB2 operation such as extracting input data for SiB2 from grid matrices and recombining the output data back to the grid format. ET estimates at selected grid cells were validated against the actual measurement of latent heat fluxes by eddy covariance measurement. We applied this system to obtain the spatial ET of the study area on a continuous basis for the 2001-2003 period. The results showed a strong feasibility of using spatial - data driven land surface models for operational monitoring of regional ET.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.115-118
• /
• 2004

Images with high resolution are desired and often required in many visual applications. When resolution can not be improved by replacing sensors, either because of cost or hardware physical limits, super resolution image reconstruction method is what can be resorted to. Super resolution image reconstruction method refers to image processing algorithms that produce high quality and high resolution images from a set of low quality and low resolution images. The method is proved to be useful in many practical cases where multiple frames of the same scene can be obtained, including satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. The method can be either the frequency domain approach or the spatial domain approach. Much of the earlier works concentrated on the frequency domain formulation, but as more general degradation models were considered, later researches had been almost exclusively on spatial domain formulations. The method in spatial domains has three stages: i) motion estimate or image registration, ii) interpolation onto high resolution grid and iii) deblurring process. The super resolution grid construction in the second stage was discussed in this paper. We applied the Maximum A­Posteriori(MAP) reconstruction method that is one of the major methods in the super resolution grid construction. Based on this method, we reconstructed high resolution images from a set of low resolution images and compared the results with those from other known interpolation methods.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.671-679
• /
• 2000

미계측지점에서의 일유출량 시계열을 합성하기 위한 도구로서 유황곡선과 공간내삽알고리즘을 이용한 지역화기법이 개발되었다. 본 연구에서는 낙동강 유역의 8개 유량 관측 지점들 중 일부를 미계측지점으로 가정하여 지역화 기법을 통해 미계측 지점의 유황곡선을 합성하였으며, 합성된 유황곡선을 공간 내삽 알고리즘에 적용하여 미계측 지점의 일유출수문곡선을 합성하였다. 미계측지점으로서 가정된 지점에서의 관측 수문곡선과 합성 수문 곡선을 비교한 결과는 상당히 좋은 값을 나타내었으며, 이로써 지역화 기법이 대상 하천의 유출 특성을 잘 나타내어 주는 기법임을 알 수 있었다. 이는 복잡한 매개 변수 산정을 필요로 하고 시간과 비용이 많이 드는 확정론적 모형의 적용 없이도 합리적인 일유출량 정보를 지역화 기법을 통해 획득할 수 있음을 보여준다. 그리고, 수자원 실무에서 많이 이용되는 비유량법과의 비교를 통해 지역화 기법이 비유량법보다 더 좋은 결과를 나타냄을 확인하였다.

• Water Engineering Research
• /
• 제6권2호
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.

• 대한원격탐사학회지
• /
• 제25권4호
• /
• pp.321-338
• /
• 2009

이 연구의 목적은 비대칭 분포를 가지는 현장 조사 자료로부터 GIS 기반 주제도를 생성하기 위한 공간 내삽 방법으로 단변량 크리깅 기법을 비교하는데 있다. 기존 정규 크리깅과 비선형 자료 변환에 기반을 둔 로그 정규 크리깅, 다중 가우시안 크리깅과 지시자 크리깅을 지화학 원소 비소와 납에 대해 사례 연구를 통해 비교하였다. 예측 능력의 비교 분석을 위해 leave-one-out 기반 교차 검증을 통한 오차 분석을 수행하였으며, 샘플링 밀도의 차이에 따른 오차의 변화 양상도 분석하였다. 비교 분석 결과, 지시자 크리깅이 전반적으로 가장 높은 예측 능력을 나타내었으며, 작은 값과 높은 값의 예측 능력도 우수한 것으로 나타났다. 정규 크리깅에 비해 비선형 자료 변환 기반 크리깅 기법들이 우수한 예측 능력을 나타내었지만, 기존에 많이 적용된 로그 정규 크리깅은 샘플링 밀도와 상관없이 편향 정도가 가장 크게 나타내었다. 이 연구를 통해 얻어지는 정량적 검증 결과는 비대칭 분포를 가지는 현장 조사 자료의 내삽을 위한 크기깅 기법의 선정에 유용하게 이용될 수 있을 것으로 기대된다.

• Journal of Information Processing Systems
• /
• 제11권4호
• /
• pp.556-572
• /
• 2015

This paper presents the applications of spatial interpolation and assimilation methods for satellite and ground meteorological data, including temperature, relative humidity, and precipitation in regions of Vietnam. In this work, Universal Kriging is used for spatially interpolating ground data and its interpolated results are assimilated with corresponding satellite data to anticipate better gridded data. The input meteorological data was collected from 98 ground weather stations located all over Vietnam; whereas, the satellite data consists of the MODIS Atmospheric Profiles product (MOD07), the ASTER Global Digital Elevation Map (ASTER DEM), and the Tropical Rainfall Measuring Mission (TRMM) in six years. The outputs are gridded fields of temperature, relative humidity, and precipitation. The empirical results were evaluated by using the Root mean square error (RMSE) and the mean percent error (MPE), which illustrate that Universal Kriging interpolation obtains higher accuracy than other forms of Kriging; whereas, the assimilation for precipitation gradually reduces RMSE and significantly MPE. It also reveals that the accuracy of temperature and humidity when employing assimilation that is not significantly improved because of low MODIS retrieval due to cloud contamination.