• Wind and Structures
• /
• 제13권5호
• /
• pp.413-431
• /
• 2010

The focus of this article is on the assessment of vertical wind vector components and their aerodynamic impact on lattice framework, specifically two distinct sections of a guyed transmission tower. Thunderstorm winds, notably very localized events such as convective downdrafts (including downbursts) and tornadoes, result in a different load on a tower's structural system in terms of magnitude and spatial distribution when compared to horizontal synoptic winds. Findings of previous model-scale experiments are outlined and their results considered for the development of a testing rig that allows for rotation about multiple body axes through a series of wind tunnel tests. Experimental results for the wind loads on two unique experimental models are presented and the difference in behaviour discussed. For a model cross arm with a solidity ratio of approximately 30%, the drag load was increased by 14% when at a pitch angle of $20^{\circ}$. Although the effects of rotation about the vertical body axis, or the traditional 'angle of attack', are recognized by design codes as being significant, provisions for vertical winds are absent from each set of wind loading specifications examined. The inclusion of a factor to relate winds with a vertical component to the horizontal speed is evaluated as a vertical wind factor applicable to load calculations. Member complexity and asymmetric geometry often complicate the use of lattice wind loading provisions, which is a challenge that extends to future studies and codification. Nevertheless, the present work is intended to establish a basis for such studies.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3792-3803
• /
• 1996

Since the skew beam element has two curvatures which are a curvature and a torsion, spatial behavior of curved beam which cannot be included in one plane can be anlayzed by emploting the skew beam element. The $C^{0}$-continuous skew beam element shows the stiffness locking phenomenon when full integration is employed. The locking phenomenpn is characterized by two typical phenomena ; one is the much smaller displacement thant the exact one and theother is the undelation phenomenon is stress distribution. In this paper, we examine how unmatched coefficient in the constrained energy brings about the locking by Reduced Minimization theory. We perform the numerical ones. These comparisons show that uniformly full integration(UFI), which employs full integration for the constrained energy, entails the locking phenomenon. But the use of uniformly reduced integration(URI) of selectively reduced integration(SRI), which employs reduced integration for constrained energy, does not produce the significant errors of displacements of the undulation phenomenon in stress distribution since they do not entails the locking, Additionally, the error due to the approximated parameters for describing the geometry of skew beam is examined.d.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1933-1938
• /
• 2004

Nucleate boiling experiments with constant wall temperature of heating surface were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames a sec using a high-speed CCD camera synchronized with the heat flow rate measurements. The geometry of the bubble during growth time could be obtained from the captured bubble images. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later respectively. The comparisons showed good agreement in the initial and thermal growth regions. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the instantaneous heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool conditions. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.145-152
• /
• 2012

Since 1966 when James Turrell completed his studies on Art, he has been working on the consistent theme of Art. For the 46 years of time, site contexts, scales, methods of light have been changed and they made Turrell's unique 'project series'. Each series has different spatial, visual-perceptual forms and characteristics from other series. The differences were caused by the given situations, but also Turrell intentionally pursued it. However, there are essential theme of art that has not changed in most of Turrell's projects. Target of this paper is to study the unchanged theme as well as the differences. The study starts with three questions: first, what is the geometrical space composition?, second, what is the visual-perceptual phenomenon?, third, what is the hidden consistent theme? This research focuses on three case projects: Wedgework, Space Division Constructions, Skyspaces. These project series are in between the early small object-like installations and the late mega-scale outdoor projects. The study found that geometrical space composition has important role to give visual-perceptual dynamism to the viewer. The phenomenological perception is connected to the questions of relationship between human and space, ultimately human and the world. Although the Merleau-Ponty's philosophy has been related to the work of Turrell in various previous studies, Cartesian 3-dimensional geometry has also crucial role to experiment a viewer's perceptual boundaries. Image of infinity is another aspect of three cases, especially Space Division Constructions and Skyspaces. Through these structure, Turrell's work lead to an ultimate question of meaning for human existence in infinite space. It is hoped that this paper is helpful for Architecture and Interior design field in which light and space are essential.

• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.364-370
• /
• 2011

본 논문은 공분산 행렬과 리만 다양체 이론에 근거를 둔 이동물체를 추적하는 새로운 방법을 제안한다. 연속적으로 변화하는 동영상 배경에서 다양한 변형을 겪는 비정형 물체를 추적하기 위해 공분산 행렬을 사용하여 특징 추출을 한다. 공분산 행렬은 특징들의 상관관계뿐만 아니라 공간적인 속성과 통계학적인 속성을 다룰 수 있으므로 서로 다른 유형의 특징들의 융합이 가능하며 행렬의 차원이 작다. 그러므로 이동물체 영역의 공분산 행렬을 특징벡터로 구성하고 후보 영역의 공분산 행렬과 비교 연산함으로써 각 프레임마다 이동물체의 위치를 추정할 수 있다. 여기서 리만 기하학은 이동물체의 변형과 모양 변화에 효과적으로 적용될 수 있으며 최소 거리를 갖는 추정 영역을 계산하기 위해 측지선 거리를 사용하므로 정확도를 향상시킨다. 제안한 방법의 효율성은 실험을 통해 검증하였다.

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.47-62
• /
• 2020

In this study, free vibration behavior of trapezoidal sandwich plates with porous core and two graphene platelets (GPLs) reinforced nanocomposite outer layers are presented. The distribution of pores and GPLs are supposed to be functionally graded (FG) along the thickness of core and nanocomposite layers, respectively. The effective Young's modulus of the GPL-reinforced (GPLR) nanocomposite layers is determined using the modified Halpin-Tsai micromechanics model, while the Poisson's ratio and density are computed by the rule of mixtures. The FSDT plate theory is utilized to establish governing partial differential equations and boundary conditions (B.C.s) for trapezoidal plate. The governing equations together with related B.C.s are discretized using a mapping- generalized differential quadrature (GDQ) method in the spatial domain. Then natural frequencies of the trapezoidal sandwich plates are obtained by GDQ method. Validity of current study is evaluated by comparing its numerical results with those available in the literature. A special attention is drawn to the role of GPLs weight fraction, GPLs patterns of two faces through the thickness, porosity coefficient and distribution of porosity on natural frequencies characteristics. New results show the importance of this permeates on vibrational characteristics of porous/GPLR nanocomposite plates. Finally, the influences of B.C.s and dimension as well as the plate geometry such as face to core thickness ratio on the vibration behaviors of the trapezoidal plates are discussed.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.303-313
• /
• 2019

After a disaster happens in urban areas, many people need support for a quick evacuation. This work aims to develop a method for the calculation of the most feasible evacuation route inside buildings. In the methodology we simplify the geometry of the structural and non structural elements from the BIM (Building Information Modeling) to store them in a spatial database which follows standards to support vector data. Then, we apply the multicriteria analysis with the allocation of prioritization values and weight factors validated through the AHP (Analytic Hierarchy Process), in order to obtain the Importance Index S(n) of the elements. The criteria consider security conditions and distribution of the building's facilities. The S(n) is included as additional heuristic data for the calculation of the evacuation route through an algorithm developed as a variant of the $A^*$ pathfinding, The experimental results in the simulation of evacuation scenarios for vulnerable people in healthy physical conditions and for the elderly group, shown that the conditions about the wide of routes, restricted areas, vulnerable elements, floor roughness and location of facilities in the building applied in the multicriteria analysis has a high influence on the processing of the developed variant of $A^*$ algorithm. The criteria modify the evacuation route, because they considers as the most feasible route, the safest instead of the shortest, for the simulation of evacuation scenarios for people in healthy physical conditions. Likewise, they consider the route with the location of facilities for the movement of the elderly like the most feasible in the simulation of evacuation route for the transit of the elderly group. These results are important for the assessment of the decision makers to select between the shortest or safest route like the feasible for search and rescue activities.

• Steel and Composite Structures
• /
• 제10권2호
• /
• pp.129-149
• /
• 2010

The objective of this study is to formulate a general 3D material-structural analysis framework for the thermomechanical behavior of steel-concrete structures in a fire environment. The proposed analysis framework consists of three sequential modeling parts: fire dynamics simulation, heat transfer analysis, and a thermomechanical stress analysis of the structure. The first modeling part consists of applying the NIST (National Institute of Standards and Technology) Fire Dynamics Simulator (FDS) where coupled CFD (Computational Fluid Dynamics) with thermodynamics are combined to realistically model the fire progression within the steel-concrete structure. The goal is to generate the spatial-temporal (ST) solution variables (temperature, heat flux) on the surfaces of the structure. The FDS-ST solutions are generated in a discrete form. Continuous FDS-ST approximations are then developed to represent the temperature or heat-flux at any given time or point within the structure. An extensive numerical study is carried out to examine the best ST approximation functions that strike a balance between accuracy and simplicity. The second modeling part consists of a finite-element (FE) transient heat analysis of the structure using the continuous FDS-ST surface variables as prescribed thermal boundary conditions. The third modeling part is a thermomechanical FE structural analysis using both nonlinear material and geometry. The temperature history from the second modeling part is used at all nodal points. The ABAQUS (2003) FE code is used with external user subroutines for the second and third simulation parts in order to describe the specific heat temperature nonlinear dependency that drastically affects the transient thermal solution especially for concrete materials. User subroutines are also developed to apply the continuous FDS-ST surface nodal boundary conditions in the transient heat FE analysis. The proposed modeling framework is applied to predict the temperature and deflection of the well-documented third Cardington fire test.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.9-18
• /
• 1995

국내에서 사용되고 있는 CAD/CAM 시스템들은 모두 도입한 제품들로, 그 구조가 폐쇄형으로 되어있기 때문에, 원천기술을 갖고있지 못한 후발 개발자들은 그 내부구조를 파악하기 어렵다. 근래에 정보기술분야에서 개방형 구조를 갖는 시스템들이 등장하여 좋은 기회를 제공하고 있다. 이 글에서는 개방형 구조를 갖는 형상모델러를 개발하기 위하여 그 시스템설계를 수행한 내용을 소개한다. 기존의 유사한 형상모델러들을 조사분석하여, 새로운 시스템이 갖추어야하는 기능들을 파악하였으며, 공학설계의 전 과정을 형상모델러가 유연하게 지원하기 위하여 복합다양체를 지원하는 자료구조를 갖는 것이 필요하다고 판단하였다. 이를 토대로 개방형 구조를 갖는 형상모델러의 골격에 대한 기준모델이 제안되었다. 이러한 기준모델과 자료구조, 그리고 공통의 개발환경은 시스템 개발을 위한 여러 사람의 참여와, 업무분담, 그리고 분담개발된 요소기능들의 통합을 지원하는 유효한 수단이 될 것이다.

• 한국환경복원기술학회지
• /
• 제21권6호
• /
• pp.1-13
• /
• 2018

Mapping radiation heat flux of urban area is essential for urban design and landscape planning. Because controlling urban geometry and generating green space are important urban design strategies for reducing urban heat, urban planner and designer need to recognize the micro urban heat distribution for adequate urban planning. This study suggests a new methodology for mapping urban radiation heat flux in a micro scale considering buildings and trees' shade. For doing that, firstly, we calculate net radiation for each urban surfaces (building, road (not shaded, building shaded, tree shaded), ground (not shaded, building shaded, tree shaded), tree (not shaded, building shaded)). Then, by multiplying the area ratio of surfaces to the net radiation, we can obtain the radiation heat flux in micro-scale. The estimated net radiation results were found to be robust with a $R^2$ of 90%, which indicates a strong explanatory power of the model. The radiation heat flux map for 12h $17^{th}$ August explains that areas under the building and tree have lower net radiation heat flux, indicating that shading is a good strategy for reducing incident radiation. This method can be used for developing thermal friendly urban plan.