• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.57-66
• /
• 2001

This study used four theoretical models, such as two-point linear model, linear regression model, quadratic regression model and cubic regression model which are presented from The Ministry of Science and Technology, for extraction of urban surface temperature from Landsat TM band 6 image. Through correlation and regression analysis between result of four models and AWS(automatic weather station) observation data, this study could verify spatial distribution characteristic of urban surface temperature using GIS spatial analysis method. The result of analysis for surface temperature by landcover showed that the urban and the barren land belonged to the highest surface temperature class. And there was also -0.85 correlation in the result of correlation analysis between surface temperature and NDVI. In this result, the meteorological environmental characteristics wuld be regarded as one of the important factor in urban planning.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.2
• /
• pp.150-160
• /
• 2021

To ensure the international competitiveness of the domestic offshore plant industry, a consensus has been formed regarding the requirement for large offshore basins for performing offshore plant performance verification. Accordingly, the Korea Research Institute of Ships & Ocean Engineering has built the world's largest deep ocean engineering basin (DOEB). The purpose of this study is to evaluate the characteristics of velocity distribution under various conditions of the DOEB. An independent measuring jig is designed and manufactured to measure the current velocities of many locations within a short time. The measurement jig is a 15-m-high triangular-truss structure, and the measurement sensors can move 15 m vertically through an electric motor-wire device. The current speed is measured under various impeller revolutions per minute and locations of the DOEB using the jig. The spatial distribution characteristics of the current velocity in the DOEB and the performance of the current generator are analyzed. The maximum speed is 0.56 m/s in the center of the DOEB water surface, thereby confirming sufficient current velocity distribution uniformity for model testing.

• Earthquakes and Structures
• /
• v.18 no.4
• /
• pp.437-449
• /
• 2020

It is quite apparent that engineering concerns related to the influence of masonry infills on seismic behavior of reinforced concrete (RC) structures is likely to remain relevant in the long term, as infill walls maintain their functionalities in construction practice. Within this framework, the present paper mainly deals with the issue in terms of modal expansion of effective earthquake forces and the resultant modal responses. An adequate determination of spatial distribution of effective earthquake forces over the height of the building is highly essential for both seismic analysis and design. The possible influence of infill walls is investigated by means of modal analyses of two-, three-, and four-bay RC frames with a number of stories ranging from 3 to 8. Both uniformly and non-uniformly infilled frames are considered in numerical analyses, where infill walls are simulated by adopting the model of equivalent compression strut. Consequently, spatial distribution of effective earthquake forces, modal static base shear force response of frames, modal responses of story shears from external excitation vector and lateral floor displacements are obtained. It is found that, infill walls and their arrangement over the height of the frame structure affect the spatial distribution of modal inertia forces, as well as the considered response quantities. Moreover, the amount of influence varies in stories, but is not very dependent to bay number of frames.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.3 s.28
• /
• pp.59-67
• /
• 2005

According to diverse studies in population migration, there has been a strong age-dependent population distribution in Korea. It is shown that a particular age-group tends to reside in a particular locale or community and the effect possesses usually statistical significance. We quantitatively address this issue: how certain division of age group resides in different region of the country, and investigate possible cause of this migration pattern for different age groups. In this study, population migration trend at age groups of 20s, 30s, 40s and 50s has been analyzed incorporating a spatial econometrics model that accounts for diverse statistical pitfalls such as spatial autocorrelation and spatial dependency. We found that migration trend for different age group corresponds to regional characteristics differently. The study concludes with some policy implications and suggests a need of further study.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.211-214
• /
• 2007

With the recent development of spatial information technology, the relative importance of satellite image contents has increased to about 62%, the techniques related to satellite images have improved, and their demand is gradually increasing. Accordingly, a standard processing method for the whole process of collection from satellites to distribution of satellite images is required in many countries for efficient distribution of images and improvement of their utilization. This study presents the processor standardization technique for the preprocessing of satellite images including geometric correction, orthorectification, color adjustment, interpolation for DEM (Digital Elevation Model) production, rearrangement, and image data management, which will standardize the subjective, complex process and improve their utilization by making it easy for general users to use them

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.3-8
• /
• 1998

Using GIS and socio-economical data the relationship between human activities and global environmental change Is Analysed from the view point of food productivity and CO2 emission. Under the assumption that the population problem, the food problem and global warming due to energy consumption can be stabilized through managing land use, impacts of human activities such as consumption of food, energy and timber on global environment changes, and global population capacity are Analysed using developed system dynamics model in the research. In the model the world is divided into two groups: OECD countries and the others. Used global land use data set Is land cover map derived from satellite data, and potential distribution of arable land is estimated by the method of Clamor and Solomon which takes into consideration spatial distribution of climate data such as precipitation and evapotranspiration. In addition, impacts of CO2 emission from human activities on food production through global warming are included in the model as a feedback. The results of the analysis for BaU scenario and Toronto Conference scenario are similar to the results of existing models. From the result of this study, the human habitability in 2020 is 8 billion people, and CO2 emission in 2020 based on BaU Scenario and on Toronto Scenario is 1.7 and 1.2 times more than the 1986's respectively. Improving spatial resolution of the model by using global data to distribute the environmental variables and sauce-economical indices is left for further studies.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.5.1-5.7
• /
• 2014

Objectives Numerous studies have revealed the adverse health effects of acute and chronic exposure to particulate matter less than $10{\mu}m$ in aerodynamic diameter ($PM_{10}$). The aim of the present study was to examine the spatial distribution of $PM_{10}$ concentrations and cardiovascular mortality and to investigate the spatial correlation between $PM_{10}$ and cardiovascular mortality using spatial scan statistic (SaTScan) and a regression model. Methods From 2008 to 2010, the spatial distribution of $PM_{10}$ in the Seoul metropolitan area was examined via kriging. In addition, a group of cardiovascular mortality cases was analyzed using SaTScan-based cluster exploration. Geographically weighted regression (GWR) was applied to investigate the correlation between $PM_{10}$ concentrations and cardiovascular mortality. Results An examination of the regional distribution of the cardiovascular mortality was higher in provincial districts (gu) belonging to Incheon and the northern part of Gyeonggi-do than in other regions. In a comparison of $PM_{10}$ concentrations and mortality cluster (MC) regions, all those belonging to MC 1 and MC 2 were found to belong to particulate matter (PM) 1 and PM 2 with high concentrations of air pollutants. In addition, the GWR showed that $PM_{10}$ has a statistically significant relation to cardiovascular mortality. Conclusions To investigate the relation between air pollution and health impact, spatial analyses can be utilized based on kriging, cluster exploration, and GWR for a more systematic and quantitative analysis. It has been proven that cardiovascular mortality is spatially related to the concentration of $PM_{10}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.128-133
• /
• 2000

Numerical analysis of the transport phenomena in an inductively coupled plasma reactor was conducted with two-dimensional axisymmetric model including the electromagnetic field model, electron and species density models. The spatial distribution of the charged species in the ion flux to the wafer have been calculated to examine the influence of the process conditions including antenna and reactor geometry. The antenna radius had a significant influence on the plasma state and axial ion flux distribution.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1041-1050
• /
• 2000

In this paper the effect of specimen thickness on fatigue crack growth with the spatial distribution of material properties is presented. Basically, the material resistance to fatigue crack growth is treated as a spatial stochastic process, which varies randomly on the crack surface. The theoretical autocorrelation functions of fatigue crack growth resistance with specimen thickness are discussed for several correlation lengths. Constant ${\Delta}K$ fatigue crack growth tests were also performed on CT type specimens with three different thicknesses of BS 4360 steel. Applying the proposed stochastic model and statistical analysis procedure, the experimental data were analyzed for different specimen thicknesses for determining the autocorrelation functions and probability distributions of the fatigue crack growth resistance.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.3
• /
• pp.79-89
• /
• 2023

As the demand for environmental-friendly agricultural products continues to rise due to increased concerns regarding food safety and ecosystem conservation, it is becoming important to identify regions and spatial locations where environmental-friendly should be intensively established for production integration. This study aims to analyze the spatial distribution of environmental-friendly certified farms in Jeollanam-do, South Korea. Spatial statistical analysis based on Local Moran's I and Getis-Ord Gi^* were used to identify spatial cluster characteristics and landscape indices were utilized to analyze spatial patterns of environmental-friendly certified farms. The results indicated that Haenam-gun, Gangjin-gun, Muan-gun, and Jindo-gun were identified as hotspots, while Muan-gun, Goheung-gun, and Jindo-gun exhibited high connectivity. This suggests that environmental-friendly certified farms in Muan-gun and Jindo-gun were clustered and closely connected to one another. Based on the results of the spatial distribution of environmental-friendly certified farms, areas belonging to the hotspot and with high connectivity should be managed as clustered districts to secure the foundation and system of environmental-friendly certified farms. Areas that belong to cold spots and have low connectivity should be preceded by measures to promote conversion to environmental-friendly agriculture. In addition, it is necessary to make it possible to create a large-scale cluster district through a long-term spatial planning strategy to expand the environmental-friendly certified farms. The findings of this study can provide quantitative data on policies and discussions for developing a model for rural spatial planning.