• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.93-102
• /
• 2002

Pressure loads caused by gas, water and wind are the most important load cases in structural analysis. Often the pressure loads are approximated by constant directional loads since it is difficult to evaluate the exact value. However, the pressure load is defined as a displacement dependent one and it is necessary to consider the follower effects of the load in analysis procedure. In this study, the large deformation analysis considering geometrical nonlinearity for shell structures under pressure loads is presented. Finite element by using a three-node flat triangular shell element is formulated and the follower effects of the pressure load are included in the formulation. Some of results are presented for cantilevered beam under uniform external pressure and thin circular ring under non-uniform external pressure. The present results are in good agreement with the results available in existing literature and commercial software ABAQUS.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.860-863
• /
• 2006

Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (2D Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.95-102
• /
• 2020

The structural design of arch roofs or bridges requires the analysis of their unstable behaviors depending on certain parameters defined in the arch shape. Their maintenance should estimate the parameters from observed data. However, since the critical parameters exist in the equilibrium paths of the arch, and a small change in such the parameters causes a significant change in their behaviors. Thus, estimation to find the critical ones should be carried out using a global search algorithm. In this paper we study the parameter estimation for a shallow arch by a quantum-inspired evolution algorithm. A cost functional to estimate the system parameters included in the arch consists of the difference between the observed signal and the estimated signal of the arch system. The design variables are shape, external load and damping constant in the arch system. We provide theoretical and numerical examples for estimation of the parameters from both contaminated data and pure data.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.91-98
• /
• 2015

This paper has proposed a reinforcing method for damaged RC columns with SRF sheets and Aramid rods. In order to verify the effectiveness and performance, two original columns and two reinforced columns with SRF sheets and Aramid rods were developed and tested under lateral cyclic displacement and a constant axial load. The test showed that the improvement of energy dissipation capacity was increased in terms of strength and ductility. In addition, an analytical modeling of the standard specimens was proposed using Response-2000 and ZeusNL program. The results of analytical and experimental studies for two standard columns were compared in terms of loading-displacement curve and energy dissipation capacity based on the nonlinear static analysis.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.378-381
• /
• 2007

Analyses of Tropical Rainfall Measuring Mission (TRMM) microwave radiometer (TMI) and precipitation radar (PR) data show that the rainfall inhomogeneity, represented by the coefficient of variation, decreases as rain rate increases at the low resolution (the footprint size of TMI 10 GHz channel). The rainfall inhomogeneity, however, is relatively constant for all rain rates at the high resolution (the footprint size of TMI 37 GHz channel). Consequently, radiometric signatures at lower spatial resolutions are characterized by larger dynamic range and smaller variability than those at higher spatial resolution. Based on the observed characteristics, this study develops a low-resolution (${\sim}40{\times}40$ km) rainfall retrieval algorithm utilizing realistic rainfall distributions in the a-priori databases. The purpose of the low-resolution rainfall algorithm is to make more reliable climatological rainfalls from various microwave sensors, including low-resolution radiometers.

• Journal of KIISE:Software and Applications
• /
• v.28 no.4
• /
• pp.327-337
• /
• 2001

이 논문에서 제시된 2D Map-Based Navigation (MBN)은 다중 사용자 환경의 가상공간을 이동할 때, 실세계와 유사한 이동방법을 제공하여 사용자로 하여금 가상공간에 대한 현장감 및 현실감의 제고에 초점을 두었다. MBN은 사용자들이 가상공간에서 발생하기 쉬운 spatial loss를 방지하고, 이동 시 부가적인 입력이 없이도 일정한 속도로 이동을 지원하는 Automatic Constant-velocity Navigation, 이동중 장애물 및 다른 사용자(아바타)와의 충돌현상을 감지 및 회피하는 Collision Detection and Avoidance, 그리고 충돌회피 후 기존 방향으로의 계속된 이동을 지원하는 Path Adjustment 등의 기능을 제공한다. MBN은 spatial loss의 방지, 사용자의 부가적인 노력의 감소 및 병행작업의 보장, 현실과 유사한 사용자 중심의 navigation 기법의 제공, 그리고 가상공간과 현실과의 괴리를 줄임으로써 가상현실이 추구하는 현실감 및 현장감을 높일 수 있도록 하였다. 실험을 통하여 본 연구에서 제안한 MBN이 사용자 중심의 매우 자연스럽소, 쉽고 편리한 가상공간 navigation 인터페이사라는 평가를 얻었다.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.164-173
• /
• 2000

This paper presents an efficient bandwidth allocation method for multiple source in the two-layer video coding of different spatial resolution. We first investigate the model of bitrate distortion in the MPEG-2 spacial scalable coding,. By using approximated model parameters, than we propose an efficient bitrate control method in order to keep the same distortion level among coders and the constant quality ratio between layers. Simulation results show that the proposed method can satify the user requirement in comparison to the conventional method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.141-151
• /
• 2020

Since it was first studied in 1980, solar energy analysis model for geographic information systems has been used to determine the approximate spatial distribution of terrain. However, the spatial pattern was not able to be grasped in 3D (three-dimensional) space with low accuracy due to the limitation of input data. Because of computational efficiency, using a constant value for the brightness of the sky caused the simulation results to be less reliable especially when the slope is high or buildings are crowded around. For the above reasons, this study proposed a model that predicts solar energy of vertical surfaces of buildings with four stages below. Firstly, CIE (Commission Internationale de l'Eclairage) luminance distribution model was used to calculate the brightness distribution of the sky using NREL (National Renewable Energy Laboratory) solar tracking algorithm. Secondly, we suggested a method of calculating the shadow effect using ray tracing. Thirdly, LOD (Level of Detail) 3 of 3D spatial data was used as input data for analysis. Lastly, the accuracy was evaluated based on the atmospheric radiation data collected through the ground observation equipment in Daejeon, South Korea. As a result of evaluating the accuracy, NMBE was 5.14%, RMSE 11.12, and CVRMSE 7.09%.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.563-570
• /
• 1998

The purpose of this study was to investigate the effects of scintillator and collimator parameters that tradeoff between system sensitivity and spatial resolution. The parameters simulated using Monte Carlo program were scintillator thickness, colimator hole shape, septal thickness, and hole length. The results show that the sensitivity increases exponentially upto about 1 cm of scintillator thickness as the thickness increases. However the sensitivity is almost constant when the scintiallator is thicker than about 1 cm. The simulation of collimator hole shape shows that the hexagonal hole gives the best spatial resolution for the same system sensitivity. The system statical resolution is improved, as both collimator septal thickness and hole length increase, however that system sensitivity is rapidly decreased. In conclusion, The optimization of scintillator and collimator parameters using monte carlo simulation may be useful to develop a high-resolution miniature gamma probe.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.281-289
• /
• 2009

In this paper, a new interaction technique with the virtual single or dual acoustic reflection tablet is proposed to support the perception of depth cue and implement the effective spatial input systems of reducing the depth errors in general spatial sketching tasks. And several experiments show that the virtual wall with acoustic reflections can be thought of as a meaningful feedback for the plausible virtual conceptual design. By using the proposed idea, the degree of agreement to the target model is increased by 35% due to the single acoustic reflection tablet in the constant depth plane. In the slanted plane, the degree of agreement is increased by 8% due to the dual acoustic reflection compared to the single acoustic reflection and the degree of agreement is increased by 15% on the curved vase.