• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.17-28
• /
• 2011

Biogas production and utilization are an emerging alternative energy technology. Biogas is produced from the biological breakdown of organic matter through anaerobic digestion. Biogas can be utilized for various energy sectors such as space heating, electricity generation and vehicle fuel. Especially, to be utilized as vehicle fuel, raw biogas needs to be upgraded that is mainly the removal of carbon dioxide to increase the methane content up to more than 95 ~ 97 vol% in some cases, similar to the composition of fossil-based natural gas. Usage of Biogas as a fuel of vehicles have an effect of reducing $CO_2$ emission compared to fossil fuels. Biomethane which is produced by upgrading of biogas is regarded as a good alternative energy and usage of clean energy is encouraged to deal with air pollution and waste management as well as production of clean energy. Recently, biogas projects for vehicle fuel are newly being launched and Korea government have also announced a plan for investment to develop biogas as a transport fuel. In this study, it is aimed to examine the potential feasibility of biomethane as a transport fuel. As a results, the status of biomethane, quality standard, quality characteristics, and upgrading technology of biogas were investigated to evaluate of biogas as a vehicle fuel of transportation.

• Tunnel and Underground Space
• /
• v.7 no.2
• /
• pp.100-107
• /
• 1997

In case of a fire outbreak in a uni-directional road tunnel, the flow of traffic immediately behind the fire disaster will be stalled all the way back to the entrance of the tunnel. Furthermore, when the vehicle passengers try to flee away from the fire toward the entrance of the tunnel, the extremely hot fume that propagates in the same direction will be fatal to the multitudes evacuating, but may also cause damage to the ventilation equipments and the vehicles, compounding the evacuation process. This paper will present the 3-dimensional modelling analysis of the preventive measures of such a fume propagation in the same direction as the evacuating passengers. For the analysis, the fire hazard was assumed to be a perfect combustion of methane gas injected through the 1 m X 2 m nozzle in the middle of the tunnel, and the product of $CO_2$ as the indicator of the fume propagation. From the research results, when the fire hazard occurred in middle of the 400 m road tunnel, the air density decreased around the fire point, and the maximum temperatures were 996 K and 499 K at 210 m and 350 m locations, respectively, 60 seconds after fire disaster occurred, when the fumes were driven out only towards the exit-direction of the tunnel. By tracing the increase of $CO_2$ level over 1% mole fraction, the minimum longitudinal ventilation velocity was found to be 2.40 m/sec. Furthermore, through Analysis of the temperature distribution graphs, and observation of the cross-sectional distribution of $CO_2$ over 1% mole fraction, it was found that the fume did not mix with the air, but rather moved far in a laminar flow towards exit of the tunnel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1434-1439
• /
• 2004

CFRP composite materials have wide application in structure materials of airplane, ships, and aero space vehicles because of their high strength and stiffness. This paper is to study the effects of curvature and orientation angle on the penetration characteristics of CFRP laminate shell. They are staked with 8 Ply specimens [0$_2$/90$_2$]$_{s}$, [0/90$_2$/0]$_{s}$ and the stacked of outer plates degree with 12 Ply specimens [0$_3$/90$_3$]$_{s}$, [0$_2$/90$_2$/0]$_{s}$ and [90$_3$/0$_3$], [90$_2$/0$_2$/90]S. They are manufactured to varied curvature radius (R=100,150,200mm and $\infty$). They are cured by heating to the appropriate harding temperature(13$0^{\circ}C$) by mean of a heater at the vaccum bag of the autoclave. Test specimens were prepared with dimensions 100mm$\times$140mm. When the specimen is subjected to transverse impact by a steel ball, the velocity of the steel ball was measured both before and after impact by determining the time for it to pass two ballistic-screen sensor located a known distance apart. In general, kinetic energy after impact-kinetic energy before impact rised in all specimens. This study observed a fracture mode inside the specimen after a penetration test using a digital camera and it examined a fracture mode and a penetration mode to stack of outer orientation angle and curvature.rvature.

• Journal of the Korean Institute of Gas
• /
• v.13 no.4
• /
• pp.46-52
• /
• 2009

Hydrogen can extend the lean misfire limit to a large extent when it is mixed with conventional fuels for an internal combustion engine. This study is about fuel reforming to produce hydrogen enriched gas as a fuel for engine. Especially gasoline, which consists of numerous hydrocarbon fuels, considered as source of reformed gas. Various hydrocarbons, including commercial fuel were reformed and potentialities of reformed gas on vehicles were accessed. The reforming efficiency and hydrogen yield were observed. Maximum hydrogen yield were found with different gas hourly space velocity(GHSV) and O2/C ratio of reforming conditions.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.55-64
• /
• 2006

Pedestrians and vehicle users ate competing for limited space in urban streets. Therefore, strategical planning and design should be considered to balance the needs placed on urban streets. The study suggested a way to put this concept in to practice by comparing level of service(LOS) of pedestrians and vehicles in the planning and design stage. Also. the study considered the priority among two users basing on the land use characteristics and the functional hierarchy of the streets. In order to overcome the lack or prediction or survey of pedestrian demands in design process, new pedestrian LOS applicable to sidewalk design was suggested based on the comfort linked with the physical limitation. The comparison of the suggested way and the existing way provided at the end of the paper.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.393-407
• /
• 2020

In order to reduce the threat by illegal unmanned aerial vehicles, a tracking system based on sound was implemented. There are three main points to the drone acoustic tracking method. First, it scans the space through variable beam formation to find a sound source and records the sound using a microphone array. Second, it classifies it into a hidden Markov model (HMM) to find out whether the sound source exists or not, and finally, the sound source is In the case of a drone, a sound source recorded and stored as a tracking reference signal based on an adaptive beam pattern is used. The simulation was performed in both the ideal condition without background noise and interference sound and the non-ideal condition with background noise and interference sound, and evaluated the tracking performance of illegal drones. The drone tracking system designed the criteria for determining the presence or absence of a drone according to the improvement of the search distance performance according to the microphone array performance and the degree of sound pattern matching, and reflected in the design of the speech reading circuit.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.374-381
• /
• 2020

In order to improve the vertical position accuracy, the advantages of GPS and barometric altimeter are combined and used, but in order to fuse the two sensors, the geoid altitude must be compensated. In this paper, we proposed a technique that can calculate geoid altitude in real time even in low-cost embedded systems applied to drones or autonomous vehicles. Since the reference EGM08 is determined by a polynomial of the 2160th order, real-time calculation is impossible in the embedded system. Therefore, by introducing a linear interpolation technique, the amount of calculation was increased, and the storage space was saved by 75% by using the integer geoid height as a grid point. The accuracy of the proposed technique was evaluated through simulation, and it was confirmed that the accuracy of the maximum error is -1.215 m even in the region where the geoid change is rapid.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1004-1009
• /
• 2004

Precise time synchronization is a main technology in high-speed communications, parallel and distributed processing systems, Internet information industry and electronic commerce. Synchronized clocks are useful for many leasers. Often a distributed system is designed to realize some synchronized behavior, especially in real-time processing in factories, aircraft, space vehicles, and military applications. Nowadays, time synchronization has been compulsory thing as distributed processing and network operations are generalized. A network time server obtains, keeps accurate and precise time by synchronizing its local clock to standard reference time source and distributes time information through standard time synchronization protocol. This paper describes design issues and implementation of a network time server for time synchronization especially based on a clock model. The system uses GPS (Global Positioning System) as a standard reference time source and offers UTC (universal Time coordinated) through NTP (Network Time protocol). Implementation result and performance analysis are also presented.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.779-785
• /
• 2007

This study identifies visible/invisible factors and analyzes facilities, structure, and visible perceptive contents in the aspects of operation and efficiency with a focus on the interfaces between interior design of the subway and users. More specifically, it diagnoses the requirements and empirically presents improvements. As the interior design in the subway trains is fur the public reflecting the value, consciousness, and behaviors of users, it should be approached through the application of the concept of universal design that considers the potential needs and psychological satisfaction of users. In arranging the indoor of the vehicles, the conditions for the facilities should be specified through the interdisciplinary approach from professional fields including ergonomics and psychology, the path of flow should be induced through the use of space and the analysis of passengers' behaviors, an integrated planning should be re-established, and continuous evaluations of basic guidelines, manuals, and requirements should be made.