Characteristics of Partial Oxidation Reforming with Various Sorts of Hydrocarbon Fuel

연료의 종류에 따른 부분산화 반응 특성에 관한 연구

  • Park, Cheol-Woong (Korea Institute of Machinery and Materials Research Center for Tribology, Mechatronics and Energy Technology) ;
  • Choi, Young (Korea Institute of Machinery and Materials Research Center for Tribology, Mechatronics and Energy Technology) ;
  • Oh, Seung-Mook (Korea Institute of Machinery and Materials Research Center for Tribology, Mechatronics and Energy Technology)
  • Published : 2009.08.31

Abstract

Hydrogen can extend the lean misfire limit to a large extent when it is mixed with conventional fuels for an internal combustion engine. This study is about fuel reforming to produce hydrogen enriched gas as a fuel for engine. Especially gasoline, which consists of numerous hydrocarbon fuels, considered as source of reformed gas. Various hydrocarbons, including commercial fuel were reformed and potentialities of reformed gas on vehicles were accessed. The reforming efficiency and hydrogen yield were observed. Maximum hydrogen yield were found with different gas hourly space velocity(GHSV) and O2/C ratio of reforming conditions.

고유가 시대의 도래와 강화되는 배출가스 규제에 대응하기 위한 대책으로 대체에너지 엔진 및 수소연료전지와 같은 새로운 연소 및 동력 기술에 대한 관심이 증대되고 있으나, 이러한 기술의 이용은 수소제조 및 공급 기반시설 구축이 선결되어야 하며 많은 투자가 요구된다. 수소를 내연기관에 활용하는 기술은 연료의 저장과 공급, 낮은 에너지 밀도 및 연소제어 등의 어려움이 있다. 그러나 화석연료로부터 합성연료를 제조하기 위한 중간단계로 생성되는 개질가스의 이용은 내연기관으로의 실시간 수소 공급을 가능하게 하고, 소량의 수소가 혼합연료 형태로 사용됨에 따라 연소특성을 향상시킬 수 있다. 본 연구에서는 다양한 연료들의 개질 특성을 이해함과 동시에 연료 개질기의 적용가능성 여부를 판단하고자 하였다. 연료별 최대의 수소수율을 얻을 수 있는 조건에서의 열역학적 개질효율과 수소수율을 관찰하였으며, 연료와 산화제의 촉매상에서의 체류시간에 대한 영향 및 연료/산화제 비율에 변화 시 최대 수소 수율을 제시하였다.

Keywords

References

  1. J.M. Norbeck, J.W.Heffel, T.D. Durbin, B.Tabbara, J.M.Bowden and M.C.Montano, Hydrogen Fuel for Surface Transportation, SAE, 1996.
  2. Y.Jamal and M.L.Wyszynski, "On-borad Generation of Hydrogen-rich Gaseous Fuels-A Review", International Journal of Hydrogen Energy, Vol.19, No.7, pp.557-572, 1994. https://doi.org/10.1016/0360-3199(94)90213-5
  3. M.Prettre, C.Eichner and M.Perrin, "The catalytic oxidation of methane to carbon monoxide and hydrogen", Transaction of Faradat Soc., Vol.43, pp. 335-340, 1946.
  4. S.S.Bharadwaj, L.D.Schmidt, “Catalytic partial oxidation of natural gas to syngas", Fuel processing technology, Vol.42, Issuses 2-3, pp.109-127, 1995. https://doi.org/10.1016/0378-3820(94)00098-E
  5. Inyong Kang, Joongmyeon Bae, "Study on Fuel Effect for Autothermal Reforming", KSAE spring conference, pp388-393, 2005.
  6. S.Ahmed and M.Krumpelt, "Hydrogen from hydrocarbon fuels for fuel cells", International Journal of Hydrogen Energy, Vol.26, pp191-301, 2001. https://doi.org/10.1016/S0360-3199(00)00070-7
  7. C.Pereira, J.M.Bae, S.Ahmed and M.Krumpelt, "Liquid fuel reformer development : Autothermal reforming of diesel fuel", Argonne National Laboratory Chemical Technology Division, IL 60439, USA.
  8. Michael Krumpelt, Rolf Wilkenhoener, David J.Carter, Joong-Myeon Bae, John P. Kopaz, Theodore Krause and Shabbir Ahmed, "Catalytic Autothermal reforming", Annual Progress Report, U.S. Department of Energy, pp.65-70, 2000.
  9. K.Huszar, G.Racz and G.Szekely, "Investigation of the partial catalytic oxidation of methane, I. conversion rates in a single-grain reactor",Acta Chim. Acad. Sci. Hungar., Vol.70, pp.287-299, 1971.
  10. P.K.Cheekatamarla, C.M.Finnerty, "Synthesis gas production via catalytic partial oxidation reforming of liquid fuels", International Journal of Hydrogen Energy, Vol.33, pp.5012-5019, 2008. https://doi.org/10.1016/j.ijhydene.2008.07.003
  11. S.H.Yoon, et al., "Hydrogen production by catalytic decomposition of propane over carbon-based catalyst", Korean Che. Eng. Res., Vol.43, No.6, pp.668-674, 2005.