• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.3
• /
• pp.228-234
• /
• 1983

The effects of subsoiling on improving soil physical properties for increasing yield of rice were studied at different depths and spacings in a clay loam paddy soils. The results are summarized as follows : 1. Working efficiencies of subsoiling at depth 50cm were lower than those at depth 30cm by tractor, while subsoiling ratios at depth 50cm were higher than those at depth 30cm. 2. During cultivation period, water requirement in 50cm depth subsoiling was higher than that in 30cm depth subsoiling. Water requirement in the central part was more rapid about 1.0-2.0mm/day than in the middle between two neighbouring central points. 3. Soil physical properties such as hardness, bulk density and porosity were significantly improved by subsoiling and the subsoiling effects have been continued until the second year. Negative correlations between yield and bulk density or hardness of subsoil were observed. 4. A lograrithmic function was observed between rice yield ($\hat{Y}$) and subsoiling ratio(X) at depth of 20cm. The optimum space for subsoiling in 30 and 50cm depth. was 80 and 120cm, respectively.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.207-212
• /
• 2004

This article reviews recent developments in three-dimensional (3-D) magntotelluric (MT) imaging. The inversion of MT data is fundamentally ill-posed, and therefore the resultant solution is non-unique. A regularizing scheme must be involved to reduce the non-uniqueness while retaining certain a priori information in the solution. The standard approach to nonlinear inversion in geophysis has been the Gauss-Newton method, which solves a sequence of linearized inverse problems. When running to convergence, the algorithm minimizes an objective function over the space of models and in the sense produces an optimal solution of the inverse problem. The general usefulness of iterative, linearized inversion algorithms, however is greatly limited in 3-D MT applications by the requirement of computing the Jacobian(partial derivative, sensitivity) matrix of the forward problem. The difficulty may be relaxed using conjugate gradients(CG) methods. A linear CG technique is used to solve each step of Gauss-Newton iterations incompletely, while the method of nonlinear CG is applied directly to the minimization of the objective function. These CG techniques replace computation of jacobian matrix and solution of a large linear system with computations equivalent to only three forward problems per inversion iteration. Consequently, the algorithms are efficient in computational speed and memory requirement, making 3-D inversion feasible.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1681-1690
• /
• 2000

A study on energy and protein utilization, and milk production of Bali cows on grass-legume diets was carried out using 12 first lactation cows (initial BW $263.79{\pm}21.66kg$) during a period of 16 weeks starting immediately post calving. The animals were randomly allotted into 4 dietary treatment groups R1, R2, R3 and R4, receiving from the last 2 months of pregnancy onwards, graded improved rations based on a mixture of locally available grass and legume feed ad libitum. R1 contained on a DM basis 70% elephant grass (PP, Penisetum purpureum) plus 30% Gliricidia sepia leaves (GS), R2 was 30% PP plus 55% GS supplemented with 15% Hibiscus tilliactus leaves (HT, defaunating effect), R3 and R4 were 22.5% PP+41.25% GS+11.25% HT+25% concentrate, where R3 was not and R4 supplemented with zinc di-acetate. TDN, CP and zinc contents of the diets were 58.2%, 12.05% and 18.3 mg/kg respectively for R1, 65.05%, 16.9% and 25.6 mg/kg respectively for R2, 66.03%, 16.71% and 29.02 mg/kg respectively for R3 and 66.03%, 16.71% and 60.47 mg/kg respectively for R4. Milk production and body weight were monitored throughout the experimental period. In vivo body composition by the urea space technique validated by the body density method and supported by carcass data was estimated at the start and termination of the experiment. Nutrient balance and rumen performance characteristics were measured during a balance trial of 7 days during the 3rd and 4th week of the lactation period. Results indicated that quality of ration caused improvement of ruminal total VFA concentration, increments being 52 to 65% for R2, R3 and R4 above R1, with increments of acetate being less (31 to 48%) and propionate being proportionally more in comparison to total VFA increments. Similarly, ammonia concentrations increased to 5.24 to 7.07 mM, equivalent to 7.34 to 9.90 mg $NH_3-N/100ml$ rumen fluid. Results also indicated that feed quality did not affect DE and ME intakes, and heat production (HP), but increased GE, UE, energy in milk and total retained energy (RE total) in body tissues and milk. Intake-, digestible- and catabolized-protein, and retained-protein in body tissues and milk (Rprot) were all elevated increasing the quality of ration. Similar results were obtained for milk yield and components with mean values reaching 2.085 kg/d (R4) versus 0.92 kg/d (R1) for milk yield, and 170.22 g/d (R4) vs 71.69 g/d (R1), 105.74 g/d (R4) vs 45.35 g/d (R1), 101.34 g/d (R4) vs 46.36 g/d (R1) for milk-fat, -protein, and -lactose, respectively. Relatively high yields of milk production was maintained longer for R4 as compared to the other treatment groups. There were no significant effects on body mass and components due to lactation. From the relationship $RE_{total}$ (MJ/d)=12.79-0.373 ME (MJ/d); (r=0.73), it was found that $ME_{m}=0.53MJ/kgW^{0.75}.d$. Requirement of energy to support the production of milk, ranging from 0.5 to 3.0 kg/d, follows the equation: Milk Prod. ($Q_{mp}$, kg/d)=[-2.48+4.31 ME($MJ/kg^{0.75}.d$)]; (r=0.6) or $Q_{mp}$=-3.4+[0.08($ME-RE_{body\;tissue}$)]MJ/d]; (r=0.94). The requirement for protein intake for maintenance ($IP_m$) equals $6.19 g/kg^{0.75}.d$ derived from the relationship RP=-47.4+0.12 IP; (r=0.74, n=9). Equation for protein requirement for lactation is $Q_{nl}$=[($Q_{mp}$)(% protein in milk)($I_{mp}$)]/100, where $Q_{nl}$ is g protein required for lactation, $Q_{mp}$ is daily milk yield, Bali cow's milk-protein content av. 5.04%, and $I_{mp}$ is metabolic increment for milk production ($ME_{lakt}/ME_{m}=1.46$).

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.61-73
• /
• 2014

Multiphase machines are characterized by high power density, enhanced fault-tolerant capacity, and low torque pulsation. For a voltage source inverter supplied multiphase machine, the probability of load imbalances becomes greater and unwanted low-order stator voltage harmonics occur. This paper deals with the PWM control of multiphase inverters under unbalanced load conditions and it proposes a novel near-five-vector SVPWM algorithm based on the five-phase six-leg inverter. The proposed algorithm can output symmetrical phase voltages under unbalanced load conditions, which is not possible for the conventional SVPWM algorithms based on the five-phase five-leg inverters. The cause of extra harmonics in the phase voltages is analyzed, and an xy coordinate system orthogonal to the ${\alpha}{\beta}z$ coordinate system is introduced to eliminate low-order harmonics in the output phase voltages. Moreover, the digital implementation of the near-five-vector SVPWM algorithm is discussed, and the optimal approach with reduced complexity and low execution time is elaborated. A comparison of the proposed algorithm and other existing PWM algorithms is provided, and the pros and cons of the proposed algorithm are concluded. Simulation and experimental results are also given. It is shown that the proposed algorithm works well under unbalanced load conditions. However, its maximum modulation index is reduced by 5.15% in the linear modulation region, and its algorithm complexity and memory requirement increase. The basic principle in this paper can be easily extended to other inverters with different phase numbers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.146-150
• /
• 1999

With the improved cure rates for childhood malignant conditions in the past decade, late effects of cancer therapy must be recognized to minimize their impact on the quality of life in long-term survivors. Chemoradiation therapy is a major part of pediatric oncology treatment and is implicated in causing tooth agenesis, microdontia, root shortening, early apical closure, and coronal hypocalcification. Dental development may be affected by illness, trauma, chemotherapy, or radiation therapy at any point prior to complete maturation. Treatment given during the first 3.5 years of life was more likely to affect the dental lamina and crown formation and result in a small tooth. Dental treatment affected by chemoradiation damage to developing teeth includes orthodontic tooth movement, prosthetic abutment consideration, periodontal health, space maintenance, requirement for home fluoride regimens to protect hypomineralized teeth, and enodontic procedures. Dental abnormalities are common in patients treated for cancer, and these children require aggressive dental follow-up. Meticulous surveillance may facilitate detection of abnormalities, enabling the dental practitioner to intervene earlier in promoting a more aggressive regimen of oral care, thus reducing the morbidity associated with dental sequelae of oncotherapy, specifically periodontal disease and malocclusion. In this case, we report microdontia of all permanent second premolar and second molar in an 8 year old boy treated with chemotherapeutic agents during period of active dental development(14 months to 38 months of age).

• Journal of The Korean Association of Information Education
• /
• v.5 no.3
• /
• pp.329-336
• /
• 2001

This paper addresses the issue of design and application of a Web-based counseling system of which purpose is to facilitate counseling so that students can freely express their personal problems and get professional helps through the system. The prominent features of the counseling system are that the system encourages students to involve actively in interactive process, and it helps them to create genuine interests out of disbelief or uneasiness towards counseling, and it helps them to create positive attitude towards counseling. To do that, counseling process should meet the requirement of confidentiality in order to build trust between counselor and counselee. Many counseling sites operated by various organizations utilize E-mail as a communication channel for confidentiality purpose, which is likely to end up with single occasions in which desirable relationships for counseling can hardly be established. To solve the above-mentioned problem, a closed, confidential, Web-based counseling system was built on a Web server so that trustful relationship can be accomplished through a confidential, Web-based counseling system. Also, the result of applying it to a local elementary school is stated. Thanks to the merits of personalized, confidential counseling system compared to the face-to-face counseling, surpassing the limitation of time and space and overcoming the fearfulness, it was well observed that students showed great interests in participation of conseling.

• Clinics in Shoulder and Elbow
• /
• v.3 no.2
• /
• pp.102-108
• /
• 2000

The aim of this study is to determine if intra-bursal morphine and Bupivacaine mixed infusion provided useful analgesia after subacromial arthroscopic operation. At the end of the subacromial arthroscopy, continuous intra-bursal infusion catheter was inserted. In a double-blind randomized trial, Sixty patients were allocated to one of two groups: placebo group(n=30) received continuous saline infusion. Study group received mixed 5㎖ of 0.5% Bupivacaine, 2㎎ of morphine and 0.05㎖ of 1/1000 epinephrine as bolus and mixed solution of 40㎖ of 0.5% Bupivacaine and 8㎎ of morphine as maintenance dose with continuous infusion pump(0.5㎖ hourly). In the placebo group, two patients were discontinued due to leakage and catheter coming out each. Intensity of pain was evaluated preoperatively and postoperatively for 3 days by 10 graded visual analogue scale. Night pain, pain on motion, sleep disturbance, lying on painful shoulder and amounts of intramuscular pain killer were recorded. Analgesic effect for pain was cleared at 1st and 2nd postoperative day and there was less sleep disturbance for 3 days postoperatively in study group. There was no difference in pain on motion postoperatively. In study group, less pain killers were used in the first 48 hours postoperatively. The continuous intra-bursal infusion decreased perception of pain at resting stage and reduced supplemental analgesic requirement for 2 days postoperatively.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.113-121
• /
• 2020

Human Pose Estimation (HPE) which localizes the human body joints becomes a high potential for high-level applications in the field of computer vision. The main challenges of HPE in real-time are occlusion, illumination change and diversity of pose appearance. The single RGB image is fed into HPE framework in order to reduce the computation cost by using depth-independent device such as a common camera, webcam, or phone cam. However, HPE based on the single RGB is not able to solve the above challenges due to inherent characteristics of color or texture. On the other hand, depth information which is fed into HPE framework and detects the human body parts in 3D coordinates can be usefully used to solve the above challenges. However, the depth information-based HPE requires the depth-dependent device which has space constraint and is cost consuming. Especially, the result of depth information-based HPE is less reliable due to the requirement of pose initialization and less stabilization of frame tracking. Therefore, this paper proposes a new method of HPE which is robust in estimating self-occlusion. There are many human parts which can be occluded by other body parts. However, this paper focuses only on head self-occlusion. The new method is a combination of the RGB image-based HPE framework and the depth information-based HPE framework. We evaluated the performance of the proposed method by COCO Object Keypoint Similarity library. By taking an advantage of RGB image-based HPE method and depth information-based HPE method, our HPE method based on RGB-D achieved the mAP of 0.903 and mAR of 0.938. It proved that our method outperforms the RGB-based HPE and the depth-based HPE.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.65-74
• /
• 2003

Location-based service is an important spatiotemporal database application area that provides the location-aware information of wireless terminals via positioning devices such as GPS. With the rapid advances of wireless communication systems, the requirement of mobile application areas including traffic, mobile commerce and supply chaining management became the center of attention for various research issues in spatiotemporal databases. In this paper we present the A-Quadtree, an efficient indexing method for answering location-based queries where the movement vector information (e.g., speed and velocity) is not presented. We implement the A-Quadtree with an index structure for object identifiers as a.Net component to apply the component to multiplatforms. We present our approach and describe the performance evaluation through various experiments. In our experiments, we compare the performance with previous approaches and show the enhanced efficiency of our method.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.398-412
• /
• 2005

There is an increasing interest in migration legacy systems to new hardware platforms and to new software development paradigms. The reason is that high maintenance costs and lack of documentation. In order to migrate or transform legacy system, various approaches such as screen scrapping, wrapping, semi-development, and re-development, tools, and methodologies are introduced until now. However, architecture or requirements level's transformation is not suggested because most of those approaches focus on code-level transformation or a few model-level transform. In this paper, we suggest a meta-model driven approach applying 3D space concept, which can be applied into architecture and requirement phase. Proposed integrated model drives seamless migration or co-evolution from code to architecture of reverse engineering and from architecture to code of forward engineering.