• 한국수학사학회지
• /
• 제23권2호
• /
• pp.101-121
• /
• 2010

본 연구는 격자평면에서의 Pick의 정리에 대한 의의와 증명소개, Pick의 정리를 확장한 3차원 격자다면체에서의 Reeve의 정리 및 n차원 격자다면체로 일반화시킨 Ehrhart 다항식에 대한 소개와 역사적 고찰을 바탕으로 이를 고등학교 교육과정에서 다루고 있는 수열단원에 응용하기위해, Reeve의 정리를 이용하여 3차원 격자다면체의 격자점의 개수와 부피와의 관계를 제시하고, 나아가 Pick의 정리와 Ehrhart 다항식을 적용하여 수열의 합을 구하는 공식들을 새로운 증명법으로 도출하고자 한다.

• 한국실내디자인학회논문집
• /
• 제24권3호
• /
• pp.104-112
• /
• 2015

This study purposes drawing changing tendency of apartment kitchen areas and character of that by figuring out type, form and per period cause of change of brand apartment kitchen areas. I adopted subject of study as the six leading construction companies considering the apartment rankings of brand and subcontract from 2001 to 2015 when brand apartment was activated(Samsung C&T corporation Raemian, Daelim Industrial Co., Ltd E-pyeonhansesang, Daewoo E&C Prugio, GS E&C XI, Posco E&C The sharp, Hyundai E&C Hillstate) and analyzed kitchen plane of $84m^2{\sim}102m^2$ housing units which were in great demand from apartment housing market. Also, I drew changing trends of kitchen areas by conducting a model house field survey. Through this study result, I will expect the utility of baseline data which is necessary for space development by figuring out kitchen culture, flows and cause of change.

• 터널과지하공간
• /
• 제20권3호
• /
• pp.217-224
• /
• 2010

비교적 균질한 3가지 화강암이 암석의 미세구조적 특성과 파괴인성 사이의 관계를 조사하기 위하여 연구되었다. 광학 현미경 관찰로 분석된 광물입자의 장축과 미세균열의 방위에 의하여 파괴인성 및 초음파 속도의 변화를 보였다. 가장 작은 값을 나타내는 파괴인성은 인장응력 방향과 수직하게 발달된 광물입자의 장축 및 미세균열의 방향이 주결에 일치할 때로서 파괴가 연약면인 광물입자의 장축이나 미세균열의 우세방향에 평행하게 전달될 때이다. SR 시편으로 측정된 파괴인성값은 1.63~2.62 MPa $m^{0.5}$의 변화를 보이며, 그 값들은 광물입자의 평균크기 및 미세균열의 평균길이와 관련된다.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.33-47
• /
• 1992

본 논문에서는 케이블로 지지된 프리스트레스트 콘크리트(PC) 뼈대의 시공중의 각 단계를 고려하고 콘크리트와 PC 강재, 케이블 재료의 시간의존적 특성 및 재료의 비선형성과 케이블의 색 및 구조물의 처짐에 의한 기하학적 비선형성도 고려하는 해석방법을 제시했다. 구조물의 비선형거동을 해석하기 위한 운동방정식은 Updated Lagrangian 방식을 이용하여 유도하고 시간의존적인 거동올 해석하기 위해서 시간영역을 시간단계로 나누어 순차적으로 적분했다. 시공중의 각 단계를 표현하기 위해 계속적인 구조계의 변화를 고려했다. 본 논문에서 제시한 해석방법에 근거하여 컴퓨터 프로그램 CFRAME을 개발하고 예제들을 통하여 해석방법의 정당성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.980-982
• /
• 1992

This paper deals with the dielectric behaviors of $SF_6$ gas and prebreakdown growth caused by lightning impulse voltages In inhomogeneous field perturbed with a fixed needle-shaped protrusion on the electrode. The measuring interpretation of the external current induced by moving charges is described. The temporal growth of prebreakdown is observed by using a shunt and photomultiplier. The prebreakdown processes are initiated by the first streamer corona at a needle protrusion, the flashover of the main gap in the positive polarity is very sensitive to the local field and propagates into the gap with the leader mechanism. It Is found that the dependence of the prebreakdown phenomena on the polarity of applied voltages is caused by the effect of space charges. In addition, the proposed measuring techniques are very useful to perform the measurements of avalanche currents, corona discharges in inhomogeneous fields and partial discharges in voids.

• 한국실내디자인학회논문집
• /
• 제14권2호
• /
• pp.3-11
• /
• 2005

The subject of this paper is to find out the characteristics of Michael Graves' housing design. I collected the information of his designs and teamed his design language through his works on different time. I chose five actual housings for analysis which were built since 1960 when he have started his career. Though analysis of the exterior view, plane figures and the total arrangement photos, I could reached the conclusion. From analysis of this research I could figure out the characteristic of Michael Graves housing design as follows. During his whole working career $(1960\~present)$, his design style has went through distinctive characteristic changes that can be divided into: 1960s to early 1970s, mid and late 1970s, 1980s to as of now. 1960s to early 1970s, during this period his works implicated transparency, openness, consistency, complication, and contrast on space, abstraction, white-color and metaphor. mid and late 1970s, showed the white-color figure put together with geometrical structure and post-modernism styles such as ornamentation, natural and metaphor. 1980s to as of now, implicated ornamentation, natural features, historic background, interconnections, variety, symbolism and tradition.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.114-119
• /
• 2003

The aligning between the punch and die governs no only the burr formation characteristics but also the life time of the punch and die in the sheet metal blanking process. There are many ways to adjust the two elements in the general punching systems but in the case of micro punch system, the punch size is reduced to a few tenth of micrometer range and the general aligning methods are almost impossible to apply. The image processing is the most widely used method in micro punch aligning, but in order to apply the method, it needs quite a large space for visionary system to approach the punch-die aligning zone. In this paper, the new punch-die aligning method with using the total capacitance between the punch and die hole is proposed. In this method, the tip surface of the punch tool locates at the same plane of the die surface and the capacitance variation between the two elements are measured. When the center of the two elements are coincided, the capacitance is minimized, but when the align is changed to any direction, the capacitance between the two elements increase. In order to verify the feasibility of this method, the aligning and punching tests was performed.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권2호
• /
• pp.115-123
• /
• 2003

Oviposition and egg laying is an important physiological and behavioural event in the life cycle of the silkworm, Bombyx mori (L). Oviposition and egg laying is dependent on a number of intrinsic and extrinsic factors viz., neural, hormonal, environmental, physical, behavioral etc for the perpetuation of population. Although, the virgin female moths have fully developed embryos but active egg laying begins under the influence of mating which provides essential copulation stimulus for oviposition. After mating drastic biochemical changes occurred that incites egg laying under the influence of optimum environmental conditions. Weight of pupae as well as larval density has significant role on oviposition and egg laying behaviour in the silkworm wherein high pupal weight and inadequate rearing space affects not only the biology, morphology and physiology but also the oviposition and egg laying. Surface topography, plane of inclination, mating length, age of male moth, temperature and photoperiod etc has significant effect on reproductive physiology of silkworm. An attempt has been made in this review article to elucidate briefly the works carried out on mating behaviour, direct and indirect copulation stimulus, vitellogenesis, influence of environmental factors besides effect of weight of pupae and or pharate adult and larval density on oviposition and egg laying behavior in the silkworm, B. mori and its significance in silkworm seed production.

• 한국항공운항학회지
• /
• 제24권4호
• /
• pp.53-61
• /
• 2016

Air Traffic Controllers (ATC) are also essential to the efficiency of airports and the airline industry. With the increasing volume of traffic, managing flights is a complex and sometimes very stressful job. ATC is using radar and other technology to track planes 'en route' between airports and keep in touch with pilots. Alternatively, ATCs are liaising with the planes on approach. However, ATC's working condition is getting more stressful, as the volume of air traffic increases. Thus this paper tried to research cognitive emotional regulation, job satisfaction, and job involvement and organizational committment of ATCs under the stressful work condition, taking care of safety of a couple of hundreds passengers per plane. Using CERQ survey sheet (Cognitive Emotional Regulation Questionnaire), it was found out that positive thinking and acceptance of self-blame have a significant impact on job satisfaction, work absorption and organizational Loyalty.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.