• 제목/요약/키워드: space efficiency

검색결과 2,708건 처리시간 0.031초

공동주택 단위주호의 공간구성유형에 따른 정량적 평가지표에 관한 연구 (A Study of Quantitative Evaluation Indicators on Residential Units in Multiple Stock Housing based on Space Composition Types)

  • 이병호;이건원;여영호
    • KIEAE Journal
    • /
    • 제10권5호
    • /
    • pp.43-55
    • /
    • 2010
  • This research investigated 162 residential unit plans which were located in Seoul and Gyonggi Province ranging from 58 to $118m^2$ unit net area recently. Through the investigation of unit plans, a matrix was developed based on the 5 criteria for space composition types. 5 criteria are building stock types, W/D ratio of units, unit net area, number of bay to the main orientation, and openness types. After review the matrix, 10 typical unit types were selected. At the same time, quantitative evaluation indicators were developed based on the 4 criteria such as efficiency, openness, flexibility, environmental sustainability. On each criterion, 3 indicators were developed, and measured on 162 residential unit plans. Firstly, correlation analysis were pursued on 5 criteria for space composition types and 12 quantitative evaluation indicators, and reviewed on each other. Finally, quantitative evaluation indicators of 10 typical unit types were displayed on radar charts in order to show the integrated evaluation on 4 criteria such as efficiency, openness, flexibility, environmental sustainability. From the reviews and radar chart analyses, advantages, disadvantages, and improvements on each typical unit type were presented as research results.

Improved measurement uncertainty of photon detection efficiency for single pixel Silicon photomultiplier

  • 양슬기;이혜영;전진아;김석환;이직;박일흥
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.210.1-210.1
    • /
    • 2012
  • We report technique used for improved measurement uncertainties for Photon detection efficiency(PDE) of $1mm^2$ single pixel SiPM. It consists of 470nm LED light source, two 2-inch integrating sphere and two NIST calibrated silicon photodiodes that have ${\pm}2.4%$ calibration error. With raytracing simulation of our experimental setup, we predict number of photon into SiPM and measurement uncertainty. For MPPC, Hamamatsu suggested PDE(1600 micro pixel) including crosstalk and afterpulse is 23.5% at 470 nm. By using new low calibration error photodiode and raytracing simulation, our simulation result has ${\pm}3%$ measurement uncertainty. The technical detail of measurement, simulation are presented with the results and implication.

  • PDF

정보성 업무특성 따른 업무공간 레이아웃(Lay-out)에 관한 연구 (A Study on the Working space Lay-out for Working on Information in the Offices)

  • 이상호;신동준
    • 한국실내디자인학회논문집
    • /
    • 제32호
    • /
    • pp.64-71
    • /
    • 2002
  • Today, term of ‘industrial society’means the totally changing society by new technical innovation through the Industrial Revolution begun in England at the mid-nineteenth century and it made social structure centering agricultural culture change with industrial culture with expansion of goods by the massive production. Information working area has to bo a space not just for improving business efficiency in industrial society but for developing efficiency in working in harmony with the information and structural aspects based on computer and communication technology. There are two kinds of environmental elements of working space : the tangible ones are the area and the structure of working space, lights, network, layout and information machines in office, the intangible ones are a feeling of satisfaction of management and arrangement of office information machines capability of information delivery, common ownership of documents and their files, the security and connection between office workers, and harmony. According to the wave of information begun from the late twentieth century, structural layout of working area has become various by the working type through network of new developed information communication machines. But it is hard to apply them in actually.

A multilevel in space and energy solver for multigroup diffusion eigenvalue problems

  • Yee, Ben C.;Kochunas, Brendan;Larsen, Edward W.
    • Nuclear Engineering and Technology
    • /
    • 제49권6호
    • /
    • pp.1125-1134
    • /
    • 2017
  • In this paper, we present a new multilevel in space and energy diffusion (MSED) method for solving multigroup diffusion eigenvalue problems. The MSED method can be described as a PI scheme with three additional features: (1) a grey (one-group) diffusion equation used to efficiently converge the fission source and eigenvalue, (2) a space-dependent Wielandt shift technique used to reduce the number of PIs required, and (3) a multigrid-in-space linear solver for the linear solves required by each PI step. In MSED, the convergence of the solution of the multigroup diffusion eigenvalue problem is accelerated by performing work on lower-order equations with only one group and/or coarser spatial grids. Results from several Fourier analyses and a one-dimensional test code are provided to verify the efficiency of the MSED method and to justify the incorporation of the grey diffusion equation and the multigrid linear solver. These results highlight the potential efficiency of the MSED method as a solver for multidimensional multigroup diffusion eigenvalue problems, and they serve as a proof of principle for future work. Our ultimate goal is to implement the MSED method as an efficient solver for the two-dimensional/three-dimensional coarse mesh finite difference diffusion system in the Michigan parallel characteristics transport code. The work in this paper represents a necessary step towards that goal.

실내 위치 측위 효율성 분석을 위한 비콘 신호 특성 연구 (Study on the Beacon Signal Characteristic for Efficiency Analysis of Indoor Positioning)

  • 현미진;김봉현
    • 한국융합학회논문지
    • /
    • 제9권11호
    • /
    • pp.1-7
    • /
    • 2018
  • 최근 들어, 실내 공간에서의 활동 영역이 넓어지면서 실내 공간에서의 사용자 위치 측위, 추적, 공간 패턴 분석, 환경 분석 등 다양한 형태의 공간 활용 서비스 기술이 개발, 적용되고 있다. 이러한 실내 공간에서의 서비스 기술을 위해 BLE 기반의 Beacon이 대표적으로 사용되고 있다. 따라서, 본 논문에서는 비콘을 기반으로 실내 위치 측정에 대한 신호를 수집, 분석하여 비콘을 이용한 실내 위치 측정의 효율성을 분석하기 위한 모듈을 설계하였다. 실험 결과, 근거리에서 측정된 데이터의 정확도가 높으며, 실내 공간에서 장애물이 없을수록 위치 데이터가 보다 정확하게 추출되는 것으로 분석되었다.

의료정책에 따른 종합병원의 로비공간 변화 (Alteration of the Lobby Space in General Hospital According to the Medical Policy)

  • 한광호;함욱;박창근;이낙운
    • 산업기술연구
    • /
    • 제24권B호
    • /
    • pp.37-46
    • /
    • 2004
  • The purpose of this study are observing changing direction of lobby space that happen by change of medical environment investigating lobby space of General Hospital by our country's medical policy change time and supply pabulum that need in forward Hospital Architecture planning. Results of this study are as follows ; Since Whole National Insurance enforcement from 1993 to 1995, form of general hospital lobby is form that outpatient entrance and inpatient entrance are detached. And lobby function divided to waiting space for medication, requisition space and also that is appearing being detached with rest space for user. ntil 1999 since 1996 that is since Medical Treatment Information System construction, the biggest characteristic of General Hospital lobby form is making Hospital Street itself do improving efficiency of flow planning being included in lobby.

  • PDF

전문가시스템을 활용한 BIM기반 건축공간 면적계획 최적화 방안 (Optimization of BIM based Space Plan by Expert System)

  • 권오철;조주원
    • 한국CDE학회논문집
    • /
    • 제21권2호
    • /
    • pp.99-110
    • /
    • 2016
  • The quality of building space program is a key to measure how the building performance satisfies its owner and users. However assuring its efficiency requires reliable criteria that reflect high level experience knowledge in the field. This study suggests a plan to gauge the level of building space performance using expert knowledge, which has not been utilized well enough but should play a critical role. In order to setup an expert system measuring level of the space program, we firstly optimized the space areas to the best case in a knowledgebase and use them as criteria to judge the quality of the spaces extracted from BIM model. We found the experimental results show us a promising way of measuring a relative quality of the space programs.

A Simulation Study on a Workload-based Operation Planning Method in Container Terminals

  • Jeong, Yeon-Ho;Kim, Kap-Hwan;Woo, Youn-Ju;Seo, Bo-Hyeon
    • Industrial Engineering and Management Systems
    • /
    • 제11권1호
    • /
    • pp.103-113
    • /
    • 2012
  • A yard in a container terminal is a temporary storage space before containers are loaded onto the target vessel or delivered to consignees. For improving the utilization of the space in the yard and the efficiency of loading and discharging operations, it is important that operation plans must be carefully constructed in advance. A heuristic method is suggested to solve operation space planning problems considering workloads on handling equipment as well as space availabilities. The operation plans in this paper includes quay crane (QC) schedules and space plans for multiple vessels considering the workload in the container yard of container terminals. This paper evaluates the effectiveness of a space planning method and the performance of a new QC scheduling method using a simulation model.

경사각을 갖는 적층판식 유수분리기의 유수분리 효율에 관한 연구 (A Study on the Oil/Water Separation Efficiency of Laminated Plate Type Oily water Separator with Inclined Angle)

  • 한원희;김준효;최민선
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제25권2호
    • /
    • pp.365-374
    • /
    • 2001
  • Its a tendency to strengthen related international was as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15PPM only and oil filtering equipment is essential. Oily water separator of laminated plate type which is one of gravity type separator can be use as assistant equipment for the oil filtering system to meet the present IMO standard, because it fits well to process large amount of rich oil with high specific gravity. The purpose of this paper is to investigate an efficiency of oil/water separation with the characteristics of laminated plate arrangement. The analyse of oil contents for oil-water mixture were carried out in order to find an efficiency of oil/water separation and an experimental study was simultaneously carried out to investigate internal flow characteristics of separator by visualization method and PIV(Particle Image Velocimetry) measurement at three spaces of plates for 5, 10 and 15 mm with variation of inlet flow rates of $0.25m^3$/h and $0.5m^3$/h. The experimental results showed that the space of the plates acts a significant role in the separating process.

  • PDF

기화식 가습기에서 가습모듈 형상에 따른 가습효율의 수치해석 연구 (Numerical Study on the Humidification Efficiency of Humidifying Module Shapes of the Evaporative Humidifier)

  • 김현경;엄태인;문승현;윤형기;방기영
    • 설비공학논문집
    • /
    • 제26권1호
    • /
    • pp.42-47
    • /
    • 2014
  • Adequate relative humidity is needed in the common living space, for human health, and industrial space, for maintenance and efficiency. Evaporative humidifier systems generally have slow response tendencies of air loads, but relatively low initial investment and maintenance costs. Humidification efficiency in the evaporative humidifier is dependent mostly on the shapes and arrays of humidifying modules. So, we tried to apply the computational fluid dynamics to the evaporative humidifier systems, and studied the humidification efficiency of evaporative humidifiers, through the outlet air conditions.