• Journal of Korea Society of Waste Management
• /
• v.34 no.5
• /
• pp.474-481
• /
• 2017

This study was conducted to investigate the effects of inoculum and carbon sources on anaerobic digestion characteristics. The treatments were combinations of inoculum (digestate of cattle manure and rumen fluid) with carbon sources (starch, cellulose, and xylan). Anaerobic digestion was performed in triplicate at $37^{\circ}C$ for 18 days at 100 rpm. Sampling was performed at 0, 1, 2, 3, 4, 5, 7, 9, 12, 15, and 18 days to measure pH, ammonia-N, volatile solids reduction, the cumulative methane content, and the cumulative methane production. There was a significant difference in methane content depending on the carbon source and there was a significant difference in pH, ammonia-N, methane production, and methane content depending on the inoculum (P < 0.05). The results of methane production were higher in the digestate of cattle manure treatment than in the rumen fluid treatment (P < 0.05). In this study, different digestive patterns depending on the type of carbon source could be used as basic research data to set the hydraulic residence time of anaerobic digestion facilities. In addition, the use of ruminal fluid as an inoculum may help accelerate the hydrolysis and acid production steps.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.4
• /
• pp.375-379
• /
• 1996

The experiment investigated the possibility of using effluent from RUSITEC (rumen simulation technique) inoculated with rumen liquor or cow faeces as sources of micro-organisms for in vitro digestion of forages. Nine forages ${\times}3$ sources of inoculum were used in a factorial arrangement of treatments. Rumen liquor was collected from fistulated sheep and faeces was collected from cows. The RUSITEC apparatus consisted of 4 vessels, 2 vessels were charged with faecal liquor and 2 with rumen liquor. On the 8th day of the experiment RUSITEC effluent were collected to use in in vitro studies. In vitro OMD (g/kg) values using three sources of inoculum (fresh rumen liquor, RUSITEC effluent from rumen liquor or cow faeces) were statistically significant (p < 0.001). The regression relationships between OMD using fresh rumen liquor and RUSITEC effluent were highly significant ($R^2>0.90$). The results suggest that RUSITEC effluent either from rumen liquor or cow faeces can be used as a source of micro-organisms for in vitro digestion of forages.

• Microbiology and Biotechnology Letters
• /
• v.50 no.4
• /
• pp.557-562
• /
• 2022

In this study we evaluated biohydrogen production potential as operational parameters (substrate, salt concentration, and temperature) using eight inoculum sources. While the volumetric biohydrogen production rate was significantly affected by temperature and inoculum sources, substrate and salt concentration did not have a significant effect on the biohydrogen production. Mesophilic temperature (37℃) was also found more appropriate for the hydrogen production than thermophilic temperature (50℃). Rate, while the eight inoculum sources, anaerobic digestion sludge exhibited the fastest biohydrogen production. The maximum production rate from anaerobic digestion sludge was 2,729 and 1,385 ml-H₂·l^-1·d^-1 at mesophilic and thermophilic temperature, respectively.

• Journal of Life Science
• /
• v.13 no.5
• /
• pp.705-711
• /
• 2003

The gellan was produced by Pseudomonas elodea under aerobic condition. In this study, the effects of inoculum size, carbon sources and concentration, nitrogen source, and C/N ratio on the cell growth and the production of gellan were evaluated. The maximum growth of P. elodea and gellan production was obtained at 5% (v/v) of inoculum size and glucose showed best results among 9 carbon sources tested. The maximum specific yield of 2.22 and productivity of $0.03 g/\ell$h were obtained at 1.0% (w/v) of glucose. The maximum gellan production was obtained at medium without ammonium nitrate. This indicates that nitrogen limitation is essential for the production of gellan. The highest cell and gellan production were obtained at 20 of C/N ratio.

• The Plant Pathology Journal
• /
• v.23 no.2
• /
• pp.103-105
• /
• 2007

Mechanical transmission of barley seedlings with barley yellow mosaic virus (BaYMV) is generally inefficient and is the major constraint for testing cultivar resistance to the virus. To explore mechanical transmission, BaYMV-infected barley plants were grown at different conditions and used as inoculum sources to seedlings of susceptible barley cultivar Baegdong. Extracts prepared from BaYMV-infected Baegdong plants at 47, 53, 74, and 90 days after symptom appearance (DASA) and grown at 10 and $12^{\circ}C$ gave 10, 30, 68 and 76% infection, respectively on inoculated susceptible barley cv. Baegdong seedlings. While Jinyangbori, another susceptible cultivar obtained 95% infection rate inoculated with extracts from 90 DASA disease source and grown at $10/12^{\circ}C$. However, low infection rates were obtained when the virus sources were grown in a greenhouse at $15-18^{\circ}C$. Our results indicate that longer incubation period and lower temperature are required for virus accumulation and stability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1444-1452
• /
• 2007

An in vitro experiment was conducted to evaluate the differences in microbial activity of five faecal inocula from weaned pigs and one faecal inoculum from unweaned pigs in combination with 6 substrates. The substrates tested were negative control diet, corn, soybean meal, oligofructose (OF), ground chicory roots and a mixture (60% chicory pulp and 40% OF). The inocula used were derived from pigs fed either a corn-soy based diet without antibiotics (NCON), the NCON diet supplemented with oligofructose (OF), a mixture of chicory pulp (40%) and OF (60%) (MIX), ground chicory roots (CHR) or the NCON diet supplemented with antibiotics (PCON). The cumulative gas production measured fermentation kinetics and end products, such as total gas production, ammonia and volatile fatty acids, were also determined. Both the substrate and the inoculum significantly affected the fermentation characteristics. The cumulative gas production curve showed that different substrates caused more differences in traits of fermentation kinetics than the different inocula. Inocula of weaned pigs gave a significantly higher VFA production compared to the inoculum from unweaned animals, whilst the rate of fermentation and the total gas produced did not differ. OF showed the highest fermentation kinetics and the lowest $NH_3$, pH and OM loss compared to other substrates. It was concluded that the microbial activity was significantly affected by substrate and inoculum. Inoculum from weaned pigs had more potential for microbial fermentation of the carbohydrate ingredients and oligofructose than that of unweaned pigs. A combination of high and low polymer inulin may be more beneficial to the gut ecosystem than using high- or low-polymer inulin alone.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.635-640
• /
• 2016

Although microbial fuel cell (MFC) can produce electricity from organics in wastewater, nitrogen removal is required for application of process for wastewater treatment plant. This study developed flat-panel air-cathode MFCs (FA-MFCs) comprised of two large separator electrode assemblies (SEAs) and evaluate total nitrogen removal according to three inoculum sources and pre-nitrification acclimation. The nitrification efficiencies were >99% regardless of inoculum sources under the phase for pre-nitrification acclimation. The total nitrogen removal efficiencies of FA-MFCs without pre-nitrification acclimation were the highest at the low organic conditions (<300 mg-COD/L) under the phase for nitrification and denitrification. The increase of organic concentration influenced the total nitrogen removal efficiency, positively. The organics were removed >95% but were not used for heterotrophic denitrification totally. This study suggests that application of FA-MFC system for wastewater treatment can allow the simultaneous removal of organic and nitrogen compounds, although this affects the low electricity production.

• The Plant Pathology Journal
• /
• v.40 no.3
• /
• pp.290-298
• /
• 2024

K-Maryblyt has been developed for the effective control of secondary fire blight infections on blossoms and the elimination of primary inoculum sources from cankers and newly emerged shoots early in the season for both apple and pear trees. This model facilitates the precise determination of the blossom infection timing and identification of primary inoculum sources, akin to Maryblyt, predicting flower infections and the appearance of symptoms on various plant parts, including cankers, blossoms, and shoots. Nevertheless, K-Maryblyt has undergone significant improvements: Integration of Phenology Models for both apple and pear trees, Adoption of observed or predicted hourly temperatures for Epiphytic Infection Potential (EIP) calculation, incorporation of adjusted equations resulting in reduced mean error with 10.08 degree-hours (DH) for apple and 9.28 DH for pear, introduction of a relative humidity variable for pear EIP calculation, and adaptation of modified degree-day calculation methods for expected symptoms. Since the transition to a model-based control policy in 2022, the system has disseminated 158,440 messages related to blossom control and symptom prediction to farmers and professional managers in its inaugural year. Furthermore, the system has been refined to include control messages that account for the mechanism of action of pesticides distributed to farmers in specific counties, considering flower opening conditions and weather suitability for spraying. Operating as a pivotal module within the Fire Blight Forecasting Information System (FBcastS), K-Maryblyt plays a crucial role in providing essential fire blight information to farmers, professional managers, and policymakers.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.355-358
• /
• 2001

Selection of optima] nutrient sources and cultural methods for liquid spawn culture of Flammulina velutipes were carried out. The optimal temperature and pH for mycelial growth of F. velutipes were $20^{\circ}C$ and 6.0 to 7.5. respectively. In the 250ml ${Delta}$-flask culture. the amount of inoculum and culture period for the optimal mycelial growth of F. velutipes were 3 mycelial disks(diametcr 6mm) and 6 days, respectively. For the mass production of submerged culture. the optimal inoculum amount and aeration rate of F. velutipes were 5%(inoculum vol/medium vol.) and l.0vvm(vol of air/vol. of medium/min), respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2002

To maximize and sustain the productivity of Monascus pigments, various environmental and nutritional parameters, such as the initial moisture content, pH, inoculum size, sample size, and nutrient supplement, that influence pigment production were evaluated in solid-state cultures as follows: initial moisture content, $50\%;$ pH, 6.0; inoculum size $1\;\times\;10^4$ spore cells $(grams\;of\;dry\;solid\;substrate)^{-1};$ sample size, 300 g. All supplementary nutrients (carbon, nitrogen, and mineral sources) added has inhibitory effects on the cell growth and red pigment production. In open tray culture the maximum biomass yield and specific productivity of red pigments were 223 mg DCW $(grams\;of\;initial\;dry\;substrate)^{-1}$ and, $47.6\;OD_{500}\;(DCW\;grams)^{-1}h^h{-1}$ respectively.