• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• 한국통신학회논문지
• /
• 제16권12호
• /
• pp.1219-1228
• /
• 1991

적응 필터를 이용한 잡음제거기 모형은 실제의 경우 잡음신호원 으로부터 주신호입력까지 경로 전달함수와 잡음제거기의 잡음신호입력 까지의 경로 전달함수가 모두 존재한다. 종래의 잡음제거기 모형에서 한쪽의 경로 전달함수만을 고려한점을 개선하여 제안된 새 모형에서 두 방향의 전달함수가 모두 존재하는 것으로 하여 적응 잡음제거기의 최적 전달함수를 유도하였다. 적응 필터는 적응 속도가 빠른 JP 격자필터를 이용하였고 ANC-ALE 모형에 의해 SNR이 더욱 개선됨을 나타내었으며 시뮬레이션을 통하여 확인하였다. 아울러 dc bias가 특별한 신호에 대해 잡음제거기에 더욱 효과적으로 작용함을 보였다.

• 오토저널
• /
• 제14권5호
• /
• pp.95-106
• /
• 1992

Active control of acoustic noise is an application area of adaptive digital signal processing with increasingly interest along the last year. This work studies the implementation of the multichannel LMS filter and the application of this algorithm for the reduction of the noise inside a vechicle cabin using a number of 'secondary sources' drived by adaptive filtering of a reference noise source. Firstly, we propose the use of an adaptive method for the time-varient optimal convergence factor. Secondly, we propose the use of adaptive delayed inverse model to estimate the elastic-acoustic transfer function presented in vechicle cabin. The original, primary source is often periodic, with a known fundamental frequency. A suitably filtered reference signal can thus be used to drive the secondary sources. An algorithm is presented for adapting the coefficients of an FIR filter feeding such a secondary source in such a way as to minimize the output of a suitably placed microphone. In this algorithm, the coefficients of adaptive filter driving an array of secondary sources can be adapted to minimize the sum of the squares of the outputs of a number of error microphones. The multichannel LMS algorithm displays that such an algorithm is considered suitable to used for the global suppression of noise in vehicle cabin.

• 한국항행학회논문지
• /
• 제2권2호
• /
• pp.75-83
• /
• 1998

본 논문에서는 저가이면서 높은 정확도를 갖는 GPS와 DR의 통합시스템 및 이 시스템의 위치 결정에 수반되는 오차문제를 고려한다. 이 통합 GPS/DR 시스템은 실시간 또는 비 실시간으로 고정밀도의 위치 정보를 제공하는 성능을 갖는다. DR 측정치에 영향을 주는 주요 오차 요인을 분석하여 이를 8개의 상태 변수의 모델로 표현하였다. 이들 변수의 상태 방정식을 사용하여 DR신호가 제공되는 매 순간에서 상태 변수값을 추산하기 위한 통합시스템용 비선형 필터를 개발한다, 1Hz의 DR 측정치와 3Hz로 제공되는 GPS 위치 정보를 위치 추산치에 대해 이 통합시스템의 정확도를 평가한다. 시뮬레이션을 통해 GPS신호가 정전되는 기간동안 통합 시스템의 성능을 두 가지 서로 다른 잡음모델에 대해 비교 검토한다. 두 잡음모델 중 하나는 단일잡용을 사용하는 반면에 또 다른 모델은 이중 잡음 모델을 채용한다. 시뮬레이션 결과로부터 이중 잡음 모델을 채용하는 GPS/DR 통합시스템은 단일 잡음 모델을 이용하는 경우에 비하여 측위성능이 우수함을 확인하였다.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1062-1070
• /
• 2015

본 연구에서는 최적 스무딩 필터를 이용한 이동 목표물 궤적 추정을 수행한다. 이동 목표물의 위치와 속도 데이터 확보를 위해 마이크로폰 어레이를 이용한 빔형성 기법이 적용하며, 획득 데이터를 이용한 궤적 추정 성능 향상을 위해 칼만 필터와 최적 스무딩 필터를 설계한다. 목표물의 기동을 고려한 싱어 표적 모델을 필터에 활용한다. 최적 스무딩 필터 검증을 위해 초기 기동을 하는 미사일 시뮬레이션 환경에서 추정 성능을 확인하였으며, 모형 로켓을 이용한 실험을 통해 빔형성 기법과 칼만 필터, 그리고 최적 스무딩 필터의 궤적 추정 성능을 검증하였다. 검증 결과 적용한 필터를 통해 빔형성 기법을 이용한 궤적 추정 성능의 향상을 확인하였으며, 칼만 필터와 비교해 최적 스무딩 필터의 이동 목표물 궤적 추정 정밀도가 향상됨을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제16권4호
• /
• pp.73-94
• /
• 2020

Particulate infectious sources, including infectious viruses, can float in the air, causing airborne infections. To prevent indoor airborne infection, dilution control by ventilation and indoor air cleaners are frequently used. In this study, the risk of airborne infection by the operation of these two techniques was evaluated. In case of dilution control by ventilation, a high efficiency air filter was embedded at the inlet of supply air. In this study, infectious source reduction devices such as indoor air cleaner include all kinds of mechanical-filters, UV-photo catalysts and air ionizers through which air flow is forced by fans. Two mathematical models for influenza virus were applied in an infant care room where infants and young children are active, and the risk reduction efficiency was compared. As a result, in the case of individually operating the ventilator or the infectious source reduction device, the airborne infection risk reduction efficiencies were 55.2~61.2% and 53.8~59.9%, respectively. When both facilities were operated, it was found that the risk of airborne infection was reduced about 72.2~76.8%. Therefore, simultaneous operation of ventilation equipment and infectious source reduction device is the most effective method for safe environment that minimizes the risk of airborne infection of respiratory infectious diseases. In the case of a space where sufficient ventilation operation is difficult, it was found that the operation of an infectious source reduction device is important to prevent the spread of infectious diseases. This study is meaningful in that it provides an academic basis for strategies for preventing airborne infection of respiratory infectious diseases.

• 소음진동
• /
• 제7권2호
• /
• pp.301-310
• /
• 1997

This paper presents active noise control method to form the near-field quiet zone for passengers in an automobile. The actuator model including interior acoustic plant, speaker and amplifier is experimentally identified in forms of auto-regressive and moving average by means of least mean square algorithm, The digital controller is composed of the regulator and Kalman filter to be designed based on LQG (linear quadratic gaussian). If the actuator model is prefiltered with digital filter to be properly designed for concentrating control performance index on the frequency band of primary noise source, LQG design approach can be effectively applied for the design of headset controller. Experimental results demonstrate that near-field quiet zone showing about 10dB noise reduction at microphone position can be formed using the headset located at passenger seat.

• Journal of applied mathematics & informatics
• /
• 제39권5_6호
• /
• pp.851-858
• /
• 2021

In general, secondary batteries are widely used as an electric energy source. Among them, the state of energy storage of mobile devices is very important information. As a method of estimating a state, there is a method of estimating the state by integrating the current according to an energy storage state of a battery, and a method of designing a state estimator by measuring a voltage and estimating a charge amount based on a battery model. In this study, we designed the state estimator using an extended Kalman filter to increase the precision of the state estimation of the charge amount by including the error of the system model and having the robustness to the noise.

• 한국물환경학회지
• /
• 제39권1호
• /
• pp.38-45
• /
• 2023

In this study, the removal efficiency of road sweeping and sand filter facility for removing total suspended solid (TSS) as nonpoint source pollution from expressway was evaluated for the last 10 years (2012~2021) using ROADMOD. ROADMOD is a screening level model and was calibrated for runoff rate and TSS loading both at the inlet, which is the loading from the drainage area, and the outlet, from the sand filter facility. The drainage area is 715 m² and the dimensions of sand filter facility are 1.5 m (wide) × 3.8 m (length) × 1.5 m (depth). The monitoring period for model calibration was the rainfall event during Aug. 31~Sep. 1, 2021 and the amount of rainfall was 74.5 mm. As a result of calibration, the determination coefficients (R²) of the flow rate were 0.66 and 0.86, for the inlet and outlet, respectively, and those of TSS loading were 0.50 and 0.84, for the inlet and outlet, respectively. Considering that ROADMOD is a screening level model, the calibration results were reasonable to evaluate the best management practices (BMPs) on the expressway. Using ROADMOD simulation results for 2012~2021, the average yearly runoff rate from the expressway was 82% and removal efficiency was 9% for road sweeping, 35% for sand filter facility, and 39% for both road sweeping and sand filter facility.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1945-1954
• /
• 2017

In recent years, several LCL filter design methods for different converter topologies have been published, many of which use analytical expressions to calculate the ideal converter AC voltage harmonic spectrum. This paper presents the LCL filter design methodology but the focus is on presentation and validation of the non-iterative filter design method for a grid-connected three-phase two-level PWM-VSC. The developed method can be adapted for different converter topologies and PWM algorithms. Furthermore, as a starting point for the design procedure, only the range of PWM carrier frequencies is required instead of an exact value. System nonlinearities, usually omitted from analysis have a significant influence on VSC AC voltage harmonic spectrum. In order to achieve better accuracy of the proposed procedure, the system nonlinear model is incorporated into the method. Optimal filter parameters are determined using the novel cost function based on higher frequency losses of the filter. An example of LCL filter design for a 40 kVA grid-connected PWM-VSC has been presented. Obtained results have been used to construct the corresponding laboratory setup and measurements have been performed to verify the proposed method.