• Title/Summary/Keyword: source termination

Search Result 41, Processing Time 0.024 seconds

An Energy-aware Dynamic Source Routing Algorithm for Mobile Ad-hoc Networks (이동 애드혹 네트워크에서 에너지를 고려한 동적 소스 라우팅 알고리즘)

  • Lee, Cheong-Yeop;Shin, Yong-Hyeon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.16 no.10
    • /
    • pp.165-173
    • /
    • 2011
  • In Mobile Ad-hoc Network(MANET), mobile nodes are operated by limited batteries. Therefore, it is very important to consume the battery power efficiently to prevent termination of the network. In this paper, we propose Energy-aware Dynamic Source Routing(EDSR) which is based on the Dynamic Source Routing(DSR) to increase the packet transmission and lifetime of the network. If the battery power of a node reaches threshold level, then the node gives up the function of relaying to save battery power except as a source and a destination node. While the conventional DSR doesn't consider the battery consumptions of the nodes, EDSR blocks the nodes from relaying whose battery powers are below the threshold level. Simulation results show the proposed EDSR is more efficient in packet transmission and network lifetime through the balanced battery consumption of the mobile nodes.

Schottky barrier polycrystalline silicon thin film transistor by using platinum-silicided source and drain (플레티늄-실리사이드를 이용한 쇼트키 장벽 다결정 박막 트랜지스터트랜지스터)

  • Shin, Jin-Wook;Choi, Chel-Jong;Chung, Hong-Bay;Jung, Jong-Wan;Cho, Won-Ju
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.80-81
    • /
    • 2008
  • Schottky barrier thin film transistors (SB-TFT) on polycrystalline silicon(poly-Si) are fabricated by platinum silicided source/drain for p-type SB-TFT. High quality poly-Si film were obtained by crystallizing the amorphous Si film with excimer laser annealing (ELA) or solid phase crystallization (SPC) method. The fabricated poly-Si SB-TFTs showed low leakage current level and a large on/off current ratio larger than $10^5$. Significant improvement of electrical characteristics were obtained by the additional forming gas annealing in 2% $H_2/N_2$ ambient, which is attributed to the termination of dangling bond at the poly-Si grain boundaries as well as the reduction of interface trap states at gate oxide/poly-Si channel.

  • PDF

Performance Analysis of 5Gbps/1.25Gbps WDM/TDM Hybrid Passive Optical Network with Inverse Return to Zero(RZ) coded Downstream and NRZ upstream re-modulation by Performing Simulation with MATLAB (모의실험을 통한 역 RZ 부호로 코딩된 하향신호의 재변조를 이용한 5Gbps/1.25Gbps WDM/TDM 하이브리드 수동 광가입자 망의 성능분석)

  • Park, Sang-Jo
    • Journal of the Korea Society of Computer and Information
    • /
    • v.17 no.8
    • /
    • pp.51-60
    • /
    • 2012
  • I propose the 5Gbps/1.25Gbps WDM/TDM hybrid Passive Optical Network(PON) with inverse RZ(Return to Zero) code coded downstream and NRZ(Non Return to Zero) upstream re-modulation and analyze its performance by performing simulation with MATLAB. The results have shown that an optical line termination (OLT) can be connected to 8, 16 optical network unit (ONU)s with the Bit Error Rate(BER) of $10^{-9}$ when the distance between OLT and ONU is 10Km and transmitted optical powers are more than -3.8, -0.9dBm, respectively. The proposed WDM/TDM hybrid PON system can solve the problem of data rate limit in upstream which happened in the conventional TDM PON because the upstream data rate is proportional to ONU and does not require a light source in ONU and its control circuits in OLT, thus can be a useful technology for asymmetric optical subscriber networks.

10Gbps Driver Design with Pre-Emphasis Functionality (Pre-Emphasis 기능을 갖는 10Gbps 드라이버의 설계)

  • Lee, Woo-Kwan;Rim, Woo-Jin;Kim, Soo-Won
    • Proceedings of the IEEK Conference
    • /
    • 2005.11a
    • /
    • pp.691-694
    • /
    • 2005
  • This paper proposed 10Gbps driver with pre-emphasis for high speed transmitter. the proposed driver increase bandwidth using Ft doubler method and design driver block and pre-emphasis block in together. Pre-emphasis functionality confirmed to control VDS of current source o driver, not to control slew rate of termination resistor. The proposed driver is designed in a 1.5V/0.13um 1-poly, 5-metal CMOS mixed-signal process.

  • PDF

Comparisons of Infant Feeding Patterns Among Korean Living in Texas, USA and Local Populations (미국 텍사스주에 거주하는 한국인과 그 지역주민들의 영아수유 패턴에 관한 비교연구)

  • 노희경
    • Journal of Nutrition and Health
    • /
    • v.28 no.7
    • /
    • pp.636-643
    • /
    • 1995
  • This study was conducted to find some differences in infant feeding pattems between well educated Koreans and local populations living in Texas, USA. Initiation rate of exclusive breastfeeding in the hospital was 35.9% in Koreans and 60.4% in Americans. At 2, 4 and 6 months, exclusive breastfeeding rates were 34.0%, 20.8% and 13.2% for Koreans and 47.2%, 34.0% and 27.2% for Americans respectively. There was a significant difference in age of weaning from breast between these two groups(p<0.01). In Koreans the most common reason for the early termination before 4 months was maternal report of milk insufficiency. 55.6% of Koreans and 42.3% of Americans fed infants on scheduled rather on demand feeding. Primary sources of advice about feeding were medical professionals in Americans while baby's grandmother was the main source in Koreans. In Americans, choice of breastfeeding was not associated with ethnicity, maternal education, and family income in the study. Interventions to promote and support participants of Women Infants and Children(WIC) may play a role in Americans. It might be suggested that effective nutrition education programs targeting for Korean mothers to promote breastfeeding should be needed urgently and systematically.

  • PDF

Study of Transient Response in Non-uniform Plasma Layer with Optically-Controlled Microwave Pulses (광-마이크로파 기반 유도플라즈마의 과도응답 특성에 관한 연구)

  • Wang, Xue;Choi, Yue-Soon;Park, Jong-Goo;Kim, Yong-K.
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.58 no.6
    • /
    • pp.1174-1179
    • /
    • 2009
  • In this paper we develop the characteristic of density on non-uniform plasma in different layer of the semiconductor with optically controlled microwave pulses. The transient response of the microwave pulses in different plasma layer has been evaluated by calculating the variation of the reflection function of dielectric microstrip lines. The lines has used under open-ended termination containing optically induced plasma region, which has illuminated a laser source. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. The analyzes the variation of transient response in a 0.01cm layer near the surface for frequency range from 1GHz to 128GHz. The diffusion length LD is larger than compared to the absorption depth $l/_{\alpha}l$. The variation of characteristic response in plasma layer with microwave pulses which has in deferentially localized has been evaluated analytically.

Construction of On-line Partial Discharge Monitoring System for 380kV XLPE Cable in Saudi Arabia (사우디아라비아 380kV XLPE Cable의 신뢰성 확보를 위한 온라인 부분방전 모니터링 시스템 구축)

  • Seo, In-Jin;Lee, Jeon-Seon;Kim, Han-Joong;Kim, Jong-Cheol;Kim, Jung-Yoon;Lee, Hyun-Sun
    • Proceedings of the KIEE Conference
    • /
    • 2008.10a
    • /
    • pp.95-96
    • /
    • 2008
  • We constructed an on-line PD monitoring system for the 380kV U/G Cable project at the Riyad 9012 substation in Saudi-arabia. The system will be monitoring the termination of the two 380kV XLPE Cables to prevent unexpected failure of the cable insulation. The system had been tested in the laboratory and on-site for detection of various PD signals and reliability of operation. The system distinguish the existence and nonexistence of the partial discharge and then judge the source of partial discharge using automatic PD pattern recognition software.

  • PDF

An Experimental Study on Acoustic Performance of Splitter Silencers in Large Maritime Gas Turbine Engines (해상용 가스터빈의 스플리터 소음기 성능에 대한 실험적 연구)

  • Baek, Seonghyeon;Lee, Kanghee;Kang, Kyungsik;Lee, Iljae
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.25 no.7
    • /
    • pp.503-509
    • /
    • 2015
  • Based on ISO 7235, an experimental setup to measure the acoustic performance of splitter type dissipative silencers was fabricated. The length of each duct, sound source, microphone locations, modal filter, and anechoic termination were considered in the design of this setup. The modal filter is a particularly important factor because it affects the limit of measurement. The effects of number of splitters, absorptive material density, perforate plate, and media on the noise reduction of the sample silencers were experimentally investigated. The experimental results show that the insertion loss of a silencer with media, high perforate opening, and higher number of splitters increases especially at higher frequencies.

Determination of Minority Carrier Lifetime in Solar Cells by the Method of Photoelectric Frequency Modulation (광전 주파수 변조방법에 의한 태양전지의 소수 반송자 수명 측정)

  • 박우상;정호선
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.20 no.4
    • /
    • pp.30-35
    • /
    • 1983
  • Numerical calculations have been made about the phase differences of the short circuit current in a solar cell according to the variation of the modulation frequency. The phase differences in short circuit current of the solar cell exposed to the modulated light source is measured experimentally. From the above two results, the minority carrier lifetime has been determined. Also, minority carrier lifetime has been determined from the observed photo-induced open circuit voltage decay wave form that follows termination of the excitation.

  • PDF

Linear Unequal Error Protection Codes based on Terminated Convolutional Codes

  • Bredtmann, Oliver;Czylwik, Andreas
    • Journal of Communications and Networks
    • /
    • v.17 no.1
    • /
    • pp.12-20
    • /
    • 2015
  • Convolutional codes which are terminated by direct truncation (DT) and zero tail termination provide unequal error protection. When DT terminated convolutional codes are used to encode short messages, they have interesting error protection properties. Such codes match the significance of the output bits of common quantizers and therefore lead to a low mean square error (MSE) when they are used to encode quantizer outputs which are transmitted via a noisy digital communication system. A code construction method that allows adapting the code to the channel is introduced, which is based on time-varying convolutional codes. We can show by simulations that DT terminated convolutional codes lead to a lower MSE than standard block codes for all channel conditions. Furthermore, we develop an MSE approximation which is based on an upper bound on the error probability per information bit. By means of this MSE approximation, we compare the convolutional codes to linear unequal error protection code construction methods from the literature for code dimensions which are relevant in analog to digital conversion systems. In numerous situations, the DT terminated convolutional codes have the lowest MSE among all codes.