• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.845-848
• /
• 2005

Technology transfer (TT) has been defined as the shared responsibility between the source and the destination for ensuring that technology is accepted and at least understood by someone with the knowledge and resources to apply and/or use the technology. The adoption of TT in construction industries is necessary for economic growth to occur in developing countries such as Thailand. This process should provide numerous benefits for the host sector in areas such as increased productivity, enhancement of product quality, cost savings, improvements in market share and entry to new markets. However, there are many factors, which may impact on the TT process and its subsequent outcomes for Thai construction firms and individuals, including, the transfer environment, learning environment, transferor characteristics and transferee characteristics. The performance and interaction of these enablers will influence the degree of value added to the local construction sectors in areas such as economic advancement, knowledge advancement and project performance. This paper presents a conceptual framework for international TT that accommodates the numerous factors believed to impact on the processes effectiveness. Through a Pilot Study, where 27 industry professionals from Thailand were interviewed, the significant factors which impact on the TT process have been identified along with the strength of interrelationship between individual and groups of factors. Future research seeks to target a greater sample of respondents with the view to validate the conceptual model and apply it on a number of large Thai projects where international TT was incorporated into the project agreement.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1988-1993
• /
• 2023

This experimental study investigated the effect of silica fume mixed in concrete blocks on laser-induced explosion behavior. We used a 5.3 kW fiber laser as a thermal source to induce explosive spalling on a concrete surface blended with and without silica fume. An analytical approach based on the difference in the removal rate and thermal behavior was used to determine the effect of silica fume on laser-induced explosive spalling. A scanner was employed to calculate the laser-scabbled volume of the concrete surface to derive the removal rate. The removal rate of the concrete mixed with silica fume was higher than that of without silica fume. Thermal images acquired during scabbling were used to qualitatively analyze the thermal response of laser-induced explosive spalling on the concrete surface. At the early stage of laser heating, an uneven spatial distribution of surface temperature appeared on the concrete blended with silica fume because of frequent explosive spalling within a small area. By contrast, the spalling frequency was relatively lower in laser-heated concrete without silica fume. Furthermore, we observed that a larger area was removed via a single explosive spalling event owing to its high porosity.

• Journal of English Language & Literature
• /
• v.55 no.3
• /
• pp.497-515
• /
• 2009

Culture as a source of identity, as Edward Said says, can be a battleground on which various political and ideological causes engage one another. It is not mere individual cultivation or private possession, but a program for social cohesion. Sensitively aware that a national culture should be independent from Europe, Walt Whitman enacts a new form of literature by placing different cultural values against Old World tradition. His interest in autochthonous culture originates from his deep concern about national consciousness. He believes that literary taste directed toward highly-ornamented elite culture is an obstacle to cultural unification of a nation. In order to represent American culture of the common people, Whitman incorporates a lot of cultural material into his poetry. Since he believes that America has many respectable writers at home, he urges people to adjust to their own taste instead of running after foreign authors. Whitman differentiated his poetry from previous literary models by disrupting the established literary norms and reconfiguring cultural values on the basis of American ways of life. In his comment on other poets, he concentrates on the originality and nativity of poetry. By claiming that words have characteristics of nativity, independence, and individuality, he envisions American literature to be distinguished from British literature in literary materials as well as in language. Whitman s language is composed of a vast number of words that can fully portray the nation. He works over language materials in two ways: reterritorialization and deterritorialization. Not only does his literary language become subversive of the established literary language, but also makes it possible to express strength and intensity in feeling.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.114-122
• /
• 2024

Irradiation-induced defects and the precipitates in the wrapper material of the Indian Fast Breeder Test Reactor (FBTR), SS 316 are analyzed using the synchrotron source-based Angle Dispersive X-Ray Diffraction (ADXRD) technique with X-rays of energy 17.185 keV (wavelength ~0.72146 Å). The differences and similarities in the high displacement damage samples as a function of dpa (displacement per atom) and dpa rate in the range of 2.9 × 10^-7- 9 × 10^-7 dpa/s are studied. Ferrite and M₂₃C₆ are commonly observed in the present set of high displacement damage 40-74 dpa SS 316 samples irradiated at temperatures in the range of 400-483 ℃. Also, the dislocation density has increased as a function of the irradiation dose. The X-ray diffraction peak profile parameters quantified such as peak shift and asymmetry show that the irradiation-induced defects are sensitive to the dpa rate-irradiation temperature combinations. The increase in yield strength as a function of displacement damage is also correlated to the dislocation density.

• Asia pacific journal of information systems
• /
• v.29 no.4
• /
• pp.591-614
• /
• 2019

With the proliferation of social media, it has become easier for people to spread rumors online, which can aggravate the issues arising from online rumors. There are many individuals and organizations that are adversely affected by malicious online rumors. Despite their importance, there has been little research into why and how people spread rumors online, thus inhibiting the understanding of factors that affect the spreading of online rumors. With attention seeking to address this gap, this paper draws upon the dual process theory and the de-individuation theory to develop a theoretical model of factors affecting the spreading of an online rumor, and then empirically tests it using survey data from 211 individuals about a specific rumor. The results indicate that the perceived credibility of the rumor affects the individuals' attitudes toward spreading it, which consequently affects the rumor spreading behavior. Vividness, confirmation of prior beliefs, argument strength, and source credibility positively influence the perceived credibility of online rumors. Finally, anonymity moderates the relationship between attitude toward spreading online rumors and the spreading behavior.

• Computers and Concrete
• /
• v.33 no.4
• /
• pp.361-372
• /
• 2024

Reinforced concrete (RC) bridge columns are typically designated as the primary source of energy dissipation for a bridge structure during an earthquake. Therefore, seismic repair of RC bridge columns has been studied extensively during the past several decades. On the other hand, few studies have been conducted to evaluate how repaired column members influence the system-level response of an RC bridge structure in subsequent earthquakes. In this study, a numerical model was established to simulate the response of two large-scale RC columns, repaired using different techniques, reported in the literature. The columns were implemented into a prototype bridge model that was subjected to earthquake loading. Incremental dynamic analysis (IDA) and fragility analysis were conducted on numerical bridge models to evaluate the efficacy of the repairs and the post-repair seismic performance of the prototype bridge that included one or more repaired columns in various locations. For the prototype bridge herein modeled, the results showed that a confinement-enhanced oriented repair would not affect the seismic behavior of the prototype bridge. Increasing the strength of the longitudinal reinforcement could effectively reduce the drift of the prototype bridge in subsequent earthquakes. A full repair configuration for the columns was the most effective method for enhancing the seismic performance of the prototype bridge. To obtain a positive effect on seismic performance, a minimum of two repaired columns was required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.1817-1839
• /
• 2024

To solve the problem of insufficient recognition of key nodes in the existing software defect detection process, this paper proposes a key node recognition algorithm based on node expansion degree and improved K-shell position, shortened as SDD_KNR. Firstly, the calculation formula of node expansion degree is designed to improve the degree that can measure the local defect propagation capability of nodes in the software network. Secondly, the concept of improved K-shell position of node is proposed to obtain the improved K-shell position of each node. Finally, the measurement of node defect propagation capability is defined, and the key node recognition algorithm is designed to identify the key function nodes with large defect impact range in the process of software defect detection. Using real software systems such as Nano, Cflow and Tar to design three sets of experiments. The corresponding directed weighted software function invoke networks are built to simulate intentional attack and defect source infection. The proposed SDD_KNR algorithm is compared with the BC algorithm, K-shell algorithm, KNMWSG algorithm and NMNC algorithm. The changing trend of network efficiency and the strength of node propagation force are analyzed to verify the effectiveness of the proposed SDD_KNR algorithm.

• Archives of Metallurgy and Materials
• /
• v.66 no.4
• /
• pp.1033-1036
• /
• 2021

Laser cladding is a method that can be applied to repair the crack and break on the mold and die surfaces, as well as generate new attributes on the surface to improve toughness, hardness, and corrosion resistance. It is used to extend the life of the mold. It also has the advantages of superior bonding strength and precision coating on a local area compared with the conventional thermal spraying technology. In this study, we investigated the effect of cladding on low carbon alloy steel using 18%Cr-2.5%Ni-Fe powder (Rockit404), which showed high hardness on the die surface. The process conditions were performed in an argon atmosphere using a diode laser source specialized for 900-1070 nm, and the output conditions were 5, 6, and 10 kW, respectively. After the cladding was completed, the surface coating layer's shape, the hardness according to the cross-section's thickness, and the microstructure were analyzed.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.5
• /
• pp.587-598
• /
• 2024

In this paper, we attempted to analyze vibration properties depending on construction deviations of concrete slab, and 12 specimens of 8 4 types were selected. The floor impact sound blocking performance measurement method was performed according to the standard weight impact source method among the KS F 2810 field floor impact sound blocking performance measurement methods. As a result, as the compressive strength of the slab increased, the amount of vibration decreased at a frequency of 31.5Hz, while the amount of vibration increased at 40 to 100Hz. As the slab thickness increased, the vibration level increased at a frequency of 31.5Hz and decreased significantly at frequencies between 40 and 100Hz. The level of vibration decreased with the thickness of the weakly bonded center point.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.270-278
• /
• 2005

Recycled aggregate concrete has lower strength and durability compared to concrete with natural aggregate. Therefore, metakaolin is used to improve the properties of recycled aggregate concrete. Main components of metakaolin are $SiO_2$ and $Al_2O_3$. and specific surface area is 9 times larger than that of ordinary portland cement. Quality of demolished-recycled aggregate(DRA) satisfies the type 1 of KS F 2573, but quality of source-recycled aggregate(SRA) does not satisfy with the type 2 of KS F 2573. When metakaolin was replaced with 20% of cement, compressive strength of concrete with SRA and DRA develops about 40~64% of control concrete. Water absorption ratio was reduced about 2% by replacing 20% metakaolin and it represents low compared to the natural aggregate concrete without metakaolin. In addition, the resistance to freezing and thawing, of concrete with DRA is indicated to remarkably enhanced due to the contribution of metakaolin. However, when metakaolin is replaced with 20% of cement, relative dynamic modulus of elasticity of concrete with SRA was below 60% at 210 freezing and thawing cycles.