• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

Dynamic Source Route(DSR) protocol is a simple and efficient routing protocol designed specially for use of the multi-hop Ad Hoc Network. DSR allows the network to be completely self-organized and self-configured without the need for any existing infrastructure or administration. DSR protocol consists of the two mechanisms of Router discovery and Router Maintenance, works entirely On-demand in all aspects. In this paper, we will present the performance of DSR protocol on the multi-hop wireless Ad Hoc Networks, illustrate it with simulation, and then analysis the algorism of DSR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2534-2553
• /
• 2018

Source routing is the routing scheme that arranges the whole path from source to target at the origin node that may suit the requirements from the upper layer applications' perspective. The centralized control in SDN (Software-Defined Networking) networks enables the awareness of the global topology at the controller. Therefore, augmented source routing schemes can be designed to achieve various purposes. This paper proposes a source routing scheme that conducts the top-K QoS-aware paths discovery in SDN. First, the novel non-invasive QoS over LLDP scheme is designed to collect QoS information based on LLDP in a piggyback fashion. Then, variations of the KSP (K Shortest Paths) algorithm are derived to find the unconstrained/constrained top-K ranked paths with regard to individual/overall path costs, reflecting the Quality of Service. The experiment results show that the proposed scheme can efficiently collect the QoS information and find the top-K paths. Also, the performance of our scheme is applicable in QoS-sensitive application scenarios compared with previous works.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.589-598
• /
• 2009

In wireless sensor networks, a node that reports information gathered from adjacent assets should relay packets appropriately so that its location context is kept private, and thereby helping ensure the security of the assets that are being monitored. Unfortunately, existing routing methods that counter the local eavesdropping-based tracing deal with a single asset, and most of them suffer from the packet-delivery latency as they prefer to take a separate path of many hops for each packet being sent. In this paper, we propose a routing method, greedy perimeter stateless routing-based source-location privacy with crew size w (GSLP-w), that enhances location privacy of the packet-originating node (i.e., active source) in the presence of multiple assets. GSLP-w is a hybrid method, in which the next-hop node is chosen in one of four modes, namely greedy, random, perimeter, and retreat modes. Random forwarding brings the path diversity, while greedy forwarding refrains from taking an excessively long path and leads to convergence to the destination. Perimeter routing makes detours that avoid the nodes near assets so that they cannot be located by an adversary tracing up the route path. We study the performance of GSLP-w with respect to crew size w (the number of packets being sent per path) and the number of sources. GSLP-w is compared with phantom routing-single path (PR-SP), which is a notable routing method for source-location privacy and our simulation results show that improvements from the point of the ratio of safety period and delivery latency become significant as the number of source nodes increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.23-32
• /
• 2005

This paper proposes a new algorithm for the energy constraint ad-hoc network which efficiently spread the energy usage over the network through the backup route scheme in order to increase the network lifetime. Recently, the various energy-efficient routing algorithms based on On-demanding method are proposed. Among them, PSR(Power-aware Source Routing) increased the network lifetime through the periodical route alternation depended on the use of the battery while DSR(Dynamice Source Routing) uses only the route selected during the route discovery phase. But PSR has a problem that it increases the route overhead because of the frequent flooding for the route alternation. For solving this problem, we propose HPSR(Hierarchical Power-aware Source Routing) which uses the backup route set during the route discovery in order to alternation the route without the flooding. HPSR increases the network lifetime due to the frequent route alternation using backup route while it decreases the routing overhead due to the reduced flooding. In this paper, we also prove the performance of HPSR through the simulation using OPNET.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2413-2417
• /
• 2003

This paper proposes an improvement of a QoS based routing protocol. The hierarchical source routing algorithm[4] was improved by including of the Crank-Back algorithm[2]. The Crank-Back capability is the ability to solve the problem of selecting the wrong route because of using unsynchronized routing information in the ingress router. In order to reduce time of reversing the call-setup process back to the ingress router, spare-route information is included with a call-setup packet. Spare-route information could be used by every router to find the next appropriated link itself when insufficient resource of the selected link was found. The proposed algorithm improves the performance of the source routing call-setup process significantly.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.21-29
• /
• 2010

In Ad-Hoc Networks, the limited energy is the key issue for longer network operation time. To solve this problem, various energy-aware routing techniques have been proposed including PSR (Power-aware Source Routing), HPSR (Hirachical Power-aware Source Routing), and etc. Those techniques generally select the most adequate route considering the energy consumption so that the energy efficiency can be improved. However, There are problems in those techniques that traffic can be concentrated in some specific area in a network. In this paper, a new energy aware routing technique called MPSR is proposed to achieve longer network lifetime and fewer rerouting attempts.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.61-72
• /
• 2002

In this paper, we propose two timing-driven routing algorithms for single-source net and multi-source net as applications of 1-Steiner heuristic algorithm. Using the method of substituting the cost of 1-Steiner heuristic algorithms with interconnection delay, our routing algorithms can route both single-source net and multi-source net which have all critical source-terminal pairs or one critical pair efficiently Our single-source net routing algorithm reduced the average maximum interconnection delay by up to 2.1% as compared with previous single-source routing algorithm, SERT, and 10.6% as compared with SERT-C. and Our multi-source net routing algorithm increased the average maximum interconnection delay by up to 2.7% as compared with MCMD A-tree, but outperforms it by up to average 1.4% when the signal net has only subset of critical node pairs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.23-29
• /
• 2006

In wireless sensor networks(WSNs), it is crucial to maintain network connectivity as long as possible since nodes are battery-powered and unchange-able. We propose a new routing protocol called Energy Aware Source Routing(EASR) which can be efficient in respect of network lifetime and long-term connectivity. Our protocol is multipath source routing, only one path will be selected at the same time and each path has probability to be selected like as Energy Aware Routing(EAR) protocol. The route discovery procedure of EASR protocol is reformed from the route discovery procedure of Split Multipath Routing(SMR) protocol. However, there is the difference between SMR and EASR. In EASR, we define an overhearing ratio in order to reduce energy waste due to overhearing effect among each selected path. Thus, we can establish energy efficient multiple paths by making use of overhearing ratio. The simulation results are also demonstrated that our scheme increases in network lifetimes, and achieves reasonable packet latency time.