• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.293-295
• /
• 2004

Public utilities adopt the grounding rules ; class I, class II, class III and special class III, and install the grounding electrodes in distribution facilities. To keep the safety of the human and the facilities, Public utilities also manage the value of ground resistance in distribution system biennially. At present the Hook-On meter is normally used to measure the ground resistance although it has ${\pm}5[%]$ measuring error and it can not measure the exact value when the current is over 1[A]. In addition it is very difficult to use the fall-of-potential method in distribution system. In this paper we propose the new measurement method using ground current of distribution system as the current source.

• 한국결정성장학회지
• /
• 제26권2호
• /
• pp.53-57
• /
• 2016

저항가열 방식으로 제작된 설비를 이용하여 SiC 단결정을 성장하였다. 성장 조건에 따라 결정의 성장 양상이 달랐으며, 원료부의 온도와 결정 성장부의 온도에 따라 각각 온도 설정이 필요함을 알았다. 본 논문에서는 SiC 결정의 성장 온도에 따른 성장 결과에 대하여 고찰해 보았으며, 이에 대한 결과를 보고하고자 한다.

• 한국연초학회지
• /
• 제2권2호
• /
• pp.51-57
• /
• 1980

담배 모자이크 바이러스(TMV)抵抗性을 가진 T.L448A외 30品種을 供試하여 germplasm의 抵抗性源에 따른 特性을 調査한 結果, 무병징 Group은 국부병반Group에 比하여 長幹, 多收, 晩生種이었으며 品質과 內容成分은 낮았다. 두 group의 諸形質間 相關關係는 開花日數와 草長(r=0.8308), 品質과 還元糖(r=0.9110) 間에 正의 有意相關關係를 보였다. 국부병반 group중 T.I.1504는 TMV抵抗性品種育成에 利用이 可能할 것으로 思料된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.11-16
• /
• 1998

In this paper, simultaneous estimation of rotor speed and time constant for a voltage source inverter (VSI) fed induction motor drive are disccussed. The theory is based on the Model Reference Adaptive System (MRAS). The identifier executes Simultaneous rotor speed and time constant so that vector control of the induction may be achieved in the rotor-flux oriented reference frame. Furthermore, to eliminate the offset error caused by the change in the stator resistance, a fuzzy resistance regulator is also designed which operates in parallel with the rotor speed and time constant identifier

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.705-709
• /
• 1998

Temporal and spatial distribution of Korean rice blast fungus (Pyricularia grisea) race KI-409 that has been rapidely increased since 1993 and became predominant in 1995 in Korea were investigated. Varietal resistance of current commercial cultivars of rice to the race was also tested in this study. The race KI-409 was first isolated from rice cv. Namyangbyeo in 1985. Since 1985 the race had been isolated mainly from the rice cultivars having BL1 BL7 pedigree as a resistance source. Distribution ratio of the race in 1995 was 23.7% in average and became a predominant in the P. grisea population in Korea. The race distributed widely and found in all the eight provinces in Korea. Many commercial cultivars such as Chucheongbyeo as well as those with BL1 or BL7 as a genetic background were found to be susceptible to the race KI-409.

• 전기의세계
• /
• 제30권4호
• /
• pp.227-230
• /
• 1981

The variation of sheet resistance and the reduction of masking oxide thickness with the flow rate of nitrogen gas has been measured in Boron predeposition process with Planar Diffusion source, BN-975. At 900.deg. C, the sheet resistance varied as much as 75% when the nitrogen flow rate was changed from 0.4 liters/min to 2.0 liters/min. At 975.deg. C, however, only 12% of sheet resistance variation was observed under the same flow rate change. The reduction of masking oxide thickness at 975.deg. C for a 5 min predeposition was 600 nm when the nitrogen flow rate was 0.4 liters/min. When the flow rate incresased to 1.9 liters/min, however, only 100nm of masking oxide was consumed in a similar predeposition process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.308-310
• /
• 2001

This paper investigates a novel speed sensorless control method of I.M considering the secondary resistance identification based on the transientless torque control technique. Especially, this paper aimed at the identification of the secondary resistance simultaneously with speed estimation superposing of sinusoidal flux wave to a constant flux value. Furthermore, the secondary flux with some frequency is controlled independently on torque control. The proposed speed estimation method is derived from a motor circuit equation theoretically and also it can be conducted easily by detecting primary motor currents and primary voltage commands at every sampling time. Some numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter are performed to verify the proposed method.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.73-80
• /
• 1998

The aim of this study is to develop sintered stainless steels (SSS) with good mechanical strength, wear resistance, and corrosion resistance by nitrogen ion implantation on the Culated SSS surface. Stainless steel compacts containg Cu (2-10 wt%) were prepared by electroless Cu-pating method which results in the increased3 homogenization in alloying powder. Nitrogen ion implantation was carried out by using N2 gas as the ion source. Nitrogen ions were embedded by an acceleratol of 130keV with doese $3.0\times10^{17}\;ions/\textrm{cm}^2$ on the SSS at $25^{\circ}C$ in$2\times10^{-6}$ torr vacuum. The nitrogen ion implanted SSS obtained from anodic ploarization curves revealed higher corrosion potential than that of nitrogen ion unimplante one. And nitrogen ion implanted 316LSSS had good resistance to pitting corrosion due to the synergistic effect of Mo and N, and the inhibition of $NH_4\;^+$<\TEX>, against $CI^-$<\TEX>.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1042-1045
• /
• 2000

Speed control without speed sensor is expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper investigates a novel speed estimation method of I.M considering the secondary resistance identification based on the transientless torque control technique. Especially, this paper aimed at the identification of the secondary resistance simultaneously with speed estimation. For this, the secondary flux with some frequency is controlled independently on torque. The proposed speed estimation method is derived from a motor circuit equation theoretically and also it can be conducted easily by detecting primary motor currents and primary voltage commands at every sampling time. Some numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter and experimental results are performed to verify the proposed method.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.6-12
• /
• 2007

In this paper, an robust adaptive backstepping controller is proposed for the speed control of separately excited DC motor in pure electric vehicles. A general electric drive train of PEV is conceptually rearrange to major subsystems as electric propulsion, energy source, and auxiliary subsystem and the load torque is modeled by considering the aerodynamic, rolling resistance and grading resistance. Armature and field resistance, damping coefficient and load torque are considered as uncertainties and noise generated at applying load torque to motor is also considered. It shows that the backstepping algorithm can be used to solve the problems of nonlinear system very well and robust controller can be designed without the variation of adaptive law. Simulation results are provided to demonstrate the effectiveness of the proposed controller.