• 한국물환경학회지
• /
• 제26권5호
• /
• pp.860-870
• /
• 2010

Long term monthly monitoring data showed that the water quality of streams flowing into Lake Paldang has been improved by various strategy for water. However, the effect of quality on Lake Paldang is still insufficient because of nonpoint source from watershed. In order to evaluate quantifying methods for pollution source and make a suggestion on improvements, Storm Water Management Model (SWMM) was constructed by using data set from the water quality and streamflow monitoring network in the Kyoungan watershed for Total Maximum Daily Loads (TMDLs). Load duration curve (LDC) based on the result of the Kyoungan watershed SWMM indicated that the water quality criterion on $BOD_5$ was often exceeded in up-stream than down-stream. From flowrate-load correlation curve, SS load significantly increased as streamflow increases. 75.3% of streamflow and 62.1% of $BOD_5$ loads is discharged especially in the zone of high flows, but monitoring data set didn't provide proper information about the conditions and the patterns associated with storm events. Therefore, it is necessary to acquire representative data set for comparing hydrograph and pollutograph through monitoring experimental watershed and to establish methods for quantifying point and nonpoint source pollutant loads.

• 디지털융복합연구
• /
• 제10권1호
• /
• pp.357-364
• /
• 2012

소프트웨어의 폐쇄적 지적재산권에 대한 저항으로 자유소프트웨어 운동이 추진되어 라이선스에서 제시한 사항을 이행하는 사람은 누구나 자유롭게 소프트웨어를 이용하고 개작할 수도 있는 오픈소스 소프트웨어가 널리 이용되고 있다. 오픈소스소프트웨어는 제품의 개발시간과 비용을 줄일 수 있고 이를 사용하는 많은 사람들의 검증을 거치게 되므로 개선되고 발전되어 간다. 그러나 이러한 장점과 더불어 무분별한 사용으로 분쟁의 발생위험도 높다. 이에 본 연구에서는 오픈소스 소프트웨어 분쟁 사례를 분석하여 오픈소스소프트웨어의 저작권 침해를 방지하고 적법하게 오픈소스소프트웨어를 이용할 수 있는 사용자 환경을 제시하고자 한다.

• 한국대기환경학회지
• /
• 제13권4호
• /
• pp.285-296
• /
• 1997

The suspended particulate matters had been collected on quartz fiber fiters by a cascade impactor having 9 size stages for 4 years (Sep. 1991 to Dec. 1995) in Kyung Hee University-Suwon Campus. Membrane filters were used to collected the particulate matters on each stage. The weight concentration on each stage was obtained by a microbalance and further chemical element levels were determined by an x-ray fluorescence system. Based on these chemical information, our study focused on applying the target transformation factor analysis (TTFA), a receptor model, to identify aerosol sources and to apportion quantitatively their mass contribution. There are total of 63 ambient data sets. Each data set consists of the 8 size-ranged subdata sets characterized by 16 elemental variables. By the results, four to five sources were extracted from each size range and some sources reappeared in other size ranges. Then total of 8 source profiles were statistically generated from all the ranges, such as oil burning source, soil source, field burning source, gasoline related source, coal burning source, marine source, glass related source, and unknown sources. Apportioning aerosol mass to each source was intensively examined by investigating emission inventories near the study area. The results showed that soil particle source was the most significant contributor. However, coal and oil burning sources were the major anthropogenic ones. The study finally proposed some air quality control strategies to achieve the clean air quality in Suwon area.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.508-519
• /
• 2015

The objective of this study was to quantitatively estimate $PM_{2.5}$ source contribution in Gyeongsan. Ambient $PM_{2.5}$ samples have been collected on zefluor, quartz and nylasorb filter by $PM_{2.5}$ samplers of cyclone method from September 2010 to December 2012. Collected samples were analyzed for determining 17 inorganic elements, 8 ions, and 8 carbon components after pretreatment. Based on these chemical information, the PMF model was applied to estimate the quantitative contribution of air pollution sources. The results of the PMF modeling showed that the sources were apportioned by biomass burning source (15.5%), secondary sulfate source (16.0%), industry source (10.4%), soil source (7.0%), gasoline source (9.1%), incinerator source (10.4%), diesel emission source (11.0%), and secondary nitrate source (20.6%), respectively. To analyze local source impacts from various wind directions, the CPF analysis were performed using source contribution results with the wind direction values measured at the site.

• Journal of Radiation Protection and Research
• /
• 제42권2호
• /
• pp.106-113
• /
• 2017

Background: Interfacing-system loss-of-coolant-accident (ISLOCA) has been identified as the most hazardous accident scenario in the typical PWR plants. The present study as an effort to improve the knowledge of the source term to the environment during ISLOCA focuses on an improvement of the estimation method. Materials and Methods: The improvement was performed to take into account an effect of broken pipeline and auxiliary building structures relevant to ISLOCA. An estimation of the source term to the environment was for the OPR-1000 plants by MELOCR code version 1.8.6. Results and Discussion: The key features of the source term showed that the massive amount of fission products departed from the beginning of core degradation to the vessel breach. Conclusion: The release amount of fission products may be affected by the broken pipeline and the auxiliary building structure associated with release pathway.

• 도시과학
• /
• 제8권2호
• /
• pp.7-12
• /
• 2019

In this study, the DongPieHong Ditch were taken as the research object, five sampling points were set to measure the COD, NH₃-N,TNandTPindexes. The correlation and principal component analysis were used to judge the main pollution sources and calculate pollution contribution rate. According to the population in the basin, the load of point source pollution into the river was estimated. As a result, the load of COD, NH₃-N and TP into the river was 323.04t/a, 43.8t/a and 3.9t/a, respectively. According to the statistics of the rainfall in the basin, the concentrations of COD, TP and NH₃-N in the initial rainwater were measured and calculated for non-point source pollution, and the results shown that the inflow loads of COD, NH₃-N and TP into the river were 34.59t/a, 0.12t/a and 0.71t/a, respectively. It was found that the main cause of the pollution in the east flash flood gully was point source pollution, and the proportions of COD, NH₃-N and TP into the river were 90.33%, 99.72% and 84.61%, respectively.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.31-33
• /
• 2005

• Journal of Information Technology Applications and Management
• /
• 제15권4호
• /
• pp.137-157
• /
• 2008

Fashion merchandiser profession is a highly information-intensive job. In fact, a merchandiser is to acquire a variety of information mainly from external environment and to analyze it in order to come to an informed decision. Despite a significant amount of past studies on environment scanning, their main concern was of managerial work. And, some fashion design studies have only touched the issue of information source in a descriptive tone. Here, we attempt to analyze empirically fashion merchandisers' environmental scanning activities. Our results can be stated as follows : 1) Though the quality of information source has a positive relationship with its use, the accessibility does not. 2) There is no significant difference between the use of relational source and the use of non-relational source. 3) Internet is being used more at the initial stage(opening) of information seeking than at the orientation and consolidation stage.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.393-400
• /
• 2002

Separation distance between industrial source and residential areas to avoid odor annoyance was investigated using AUSPLUME model. A Gaussian plume model (AUSPLUME) for the dispersion was used to calculate odor emission from ground level area source. Using the dispersion model to calculate ambient odor concentrations, the separation distance between industrial source and residental areas was defined by %HA (percentage of highly annoyed person) and odor percentile concentration (C98). The result was compared with the separation distance of various nation guidelines for livestock buildings. The calculated separation distance for industrial source showed similar pattern comparing with various guidelines for livestock buildings.

• 한국대기환경학회지
• /
• 제9권2호
• /
• pp.168-173
• /
• 1993

Air quality impacts of point and area sources were analyzed by using ISCST2 with wind speed and stability class combinations of SCREEN. Stack height was important in determining the impact of point sources. With the stack height reduced to 21m from 75m, the concentration in the vicinity increased several times in spite of decreasing the emission rate by half. When the emission rates were same, concentrations from an area source of 10m release height were slightly lower than those from a point source of 21m stack height at the plume centerline. Bur the area source resulted in larger area of high concentration. Concentration from the point source was high in neutral to slightly unstable conditions with strong winds in a short distance, and in stable conditions with weak winds in a long distance. Concentration from the area source decreased with distance from the source, and was high in stable conditions with weak winds.