• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.796-802
• /
• 2013

In this study, we investigates active control technology to reduce the noise transmitted to the outside through the opening of enclosures. A numerical model based on acoustic boundary element method is first established. Using the numerical model, the acoustic transfer functions of the field points over the opening to the primary source at arbitrary locations are estimated. The feedforward control to minimize the acoustic power through the opening is then numerically implemented. The controller generates the secondary source to destructively interfere the noise transmission through the opening. Finally, a parametric study is conducted to evaluate the effects of the location and the number of the microphones on the control performance. Furthermore, the effects of the location of the secondary source on the performance of active noise control are investigated. It is followed that the control system implemented in this study leads to a significant reduction of about 35dB in sound power through the open using only on secondary source located at the optimized position.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.107-116
• /
• 1996

Recently, the flash memory has been abstracting great attention in the semiconductor market in the world because of its potential applications as mass storage devices. One of the most significant barriers to the scalling-down of the stacked-gate devices such as EPROM's and flash EEPROM's is the large subthreshold leakage in the unselected cells connected with the bit line of a selected cell in the array during programming. The large subthreshold leakge is majorly due to the capacitive coupling between the floating gates of the unselectd cells and the bit line of selected cell. In this paper, a new programming method to redcue significantly the drain turn-on leakage in the unselected cells during programming has been studied, where a little positive voltage (0.25-0.75V) is applied to the soruce during programming unlike the conventional programming method in which the source is grounded. The resutls of the PISCES simulations and the electrical measurements for the standard EPROM with 0.35.mu.m effective channel length and 1.0.mu.m effective channel width show that the subthreshold leakage in the unselectd cells is significantly large when the source is grounded, whereas it is negligibly small when the source is biased ot a little positive voltage during programming. On the other hadn, the positive bias on the source is found to have little effects on the programming speed of the EPROM.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.563-574
• /
• 2022

본 연구는 정치정보원이 다양화되면서 그동안 설득커뮤니케이션 영역에서 주목받지 못했던 정보원의 속성을 정치 콘텐츠를 노출시키는 정치 유튜버에 적용해 그 영향력을 분석하였다. 이를 위해 전국의 20세 이상 성인남녀 326명을 대상으로 국내 여론조사 기관을 통해 온라인 설문조사를 실시했다. 연구결과 정치 유튜버의 유사성, 카리스마, 전문성의 순으로 해당 콘텐츠에 대한 시청자의 태도에 긍정적인 영향을 끼쳤다. 콘텐츠를 통해 노출되는 정치인/정당에 대한 태도에는 정치 유튜버의 친숙성, 카리스마, 유사성, 매력성, 신뢰성 순으로 긍정적인 영향을 미쳤다. 유튜브를 통해 노출되는 정치콘텐츠의 경우 콘텐츠에 대한 태도와 그 콘텐츠에 등장하는 정치인/정당에 대한 태도에 영향을 미치는 속성이 다르게 나타났으며, 콘텐츠에 대한 태도는 정치인/정당에 대한 태도와 이들에 대한 지지에 긍정적인 영향을 미쳤다.

• 한국지진공학회논문집
• /
• 제24권1호
• /
• pp.9-17
• /
• 2020

The stochastic point-source model has been widely used in generating artificial ground motions, which can be used to develop a ground motion prediction equation and to evaluate the seismic risk of structures. This model mainly consists of three different functions representing source, path, and site effects. The path effect is used to emulate decay in ground motion in accordance with distance from the source. In the stochastic point-source model, the path attenuation effect is taken into account by using the geometrical attenuation effect and the inelastic attenuation effect. The aim of this study is to develop accurate equations of ground motion attenuation in the Korean peninsula. In this study, attenuation was estimated and validated by using a stochastic point source model and observed ground motion recordings for the Korean peninsula.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.190-199
• /
• 2017

In this paper, a predictive direct power control (DPC) method based on a Kalman filter is presented for three-phase pulse-width modulation (PWM) rectifiers to improve the performance of rectifiers with source voltages that are distorted with harmonic components. This method can eliminate the most significant harmonic components of the source voltage using a Kalman filter algorithm. In the process of predicting the future real and reactive power to select an optimal voltage vector in the predictive DPC, the proposed method utilizes source voltages filtered by a Kalman filter, which can mitigate the adverse effects of distorted source voltages on control performance. As a result, the quality of the source currents synthesized using the PWM rectifier is improved, and the total harmonic distortion (THD) values are reduced, even under distorted source voltages.

• 지식경영연구
• /
• 제16권1호
• /
• pp.55-69
• /
• 2015

Employees' knowledge contribution is one of the critical activities that maximize internal capability of the firm and facilitate organizational innovation by sharing scattered internal knowledge. This study integrates antecedents of knowledge contribution based on the theory of planned behavior(TPB). Utilizing TPB as a theoretical framework, expected reciprocity, subjective norm, and self-efficacy's direct effects on knowledge contribution were assessed. Additionally, interaction effects among expected reciprocity, subjective norm, and self-efficacy were explored. As the results of analysis, all the antecedents significantly influenced knowledge contribution. Interestingly, when the knowledge source's self-efficacy was high, the influence of expected reciprocity on knowledge contribution was decreased. Similarly, when the knowledge source's subjective norm for knowledge contribution was high, expected reciprocity's effect was weakened. This implies that when facilitating knowledge contribution, interaction effects among antecedents of knowledge contribution, as well as their direct effects, should be considered.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.357-364
• /
• 2015

In this work, we investigate the quantum effects exhibited from ultra-thin GAA(gate-all-around) Nanowire FETs for Sub 14nm Technology. We face designing challenges particularly short channel effects (SCE). However traditional MOSFET SCE models become invalid due to unexpected quantum effects. In this paper, we investigated various performance factors of the GAA Nanowire FET structure, which is promising future device. We observe a variety of quantum effects that are not seen when large scale. Such are source drain tunneling due to short channel lengths, drastic threshold voltage increase caused by quantum confinement for small channel area, leakage current through thin gate oxide by tunneling, induced source barrier lowering by fringing field from drain enhanced by high k dielectric, and lastly the I-V characteristic dependence on channel materials and transport orientations owing to quantum confinement and valley splitting. Understanding these quantum phenomena will guide to reducing SCEs for future sub 14nm devices.

• 한국안전학회지
• /
• 제37권1호
• /
• pp.1-11
• /
• 2022

This numerical study investigates the effects of the size of the natural smoke vent area (10% and 1% of the floor area) and the location of the fire source (i.e., at the side and center of the stage) on the temperature distribution in the compartment and velocity distribution and mass flow rate of flow through a natural smoke vent for a reduced-scale model of a theater stage. Then, the mass flow rate of outflow through the natural smoke vent in the event of a fire for a real-scale theater stage was examined. The case with the larger natural smoke vent area and central fire source location showed lower temperature distributions and higher mass flow rates of outflow and inflow than the case with the smaller natural smoke vent area and side fire source location. The trends of the temperature distributions were closely related to those of the mass flow rates for the outflow and inflow. Additionally, the case with the larger natural smoke vent area and central fire source location exhibited the most non-uniform flow velocity distribution in all cases tested. A bidirectional flow, in which the outflow and inflow occur simultaneously, was observed through the natural smoke vent. In the event of a fire situation in a real-scale theater stage, it was predicted that the case with the larger natural smoke vent area and central fire source location would have a mass flow rate of outflow that is 43.53 times higher than that of the case with the smaller natural smoke vent area and side fire source location. The present results indicate that the natural smoke vent location should be determined by considering the location in a theater stage where a fire can occur.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.140-143
• /
• 1988

In this study, so called high frequency cycloconverter which converts commercial so power source directly to high frequency power source is proposed. In this system, the circulating current play very important role. Its state and magnitude effects on system characteristics. This paper deals with the control method of the circulating current and side band component analysis of high frequency side current which is produced by it.

• Advances in materials Research
• /
• 제6권1호
• /
• pp.27-43
• /
• 2017

The transient thermo-mechanical behavior of a simply-supported beam made of a functionally graded material (FGM) under the effect of a moving heat source is investigated. The FGM consists of a ceramic part (on the top), which is the hot side of the beam as the heat source motion takes place along this side, and a metal part (in the bottom), which is considered the cold side. Grading is in the transverse direction, with the properties being temperature-dependent. The main steps of the thermo-elastic modeling included deriving the partial differential equations for the temperatures and deflections in time and space, transforming them into ordinary differential equations using Laplace transformation, and finally using the inverse Laplace transformation to find the solutions. The effects of different parameters on the thermo-mechanical behavior of the beam are investigated, such as the convection coefficient and the heat source intensity and speed. The results show that temperatures, and hence the deflections and stresses increase with less heat convection from the beam surface, higher heat source intensity and low speeds.