• Transactions of the Korean Society of Automotive Engineers
• /
• 제7권5호
• /
• pp.268-277
• /
• 1999

Impulsive acoustic and vibration signals within gear are often induced by impacting of fault tooths in gear. Thus the detection of these impulses can be useful for fault diagnosis. Recently there is an increasing trend towards the use of higher order statistics for fault detection within mechanical systems based on the observation that impulsive signals then to increase the kurtosis values. We show that the fourth order Wigner Moment Spectrum, called the Wigner Trispectrum, has found superior detection performance to second order Wigner distribution for typical impulsive signals in a condition monitoring application. These methods are also applied to data sets measured within an industrial gear box.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제5권3호
• /
• pp.202-208
• /
• 1997

The knocking is one of major parameters to improve engine performance in a spark ignition engine. Many researches have been carried out to identify them using cylinder pressure, vibration signal and so on. In the present study, measurement and analysis was conducted to set up the criteria of knock occurrence by using microphone signal. Cylinder pressure was measured for the reference signal of knocking. It has been observed that resonance frequencies of pressure wave are nearly independent of engine operating conditions such as engine speed, air fuel ratio, load and octane number of fuel within to limited experimental conditions. SDBP(sum of different band-pass data) method using resonance frequency of knock was proposed for estimating knock intensity. SDBP method is superior to identify knock occurrence and its intensity in case of sound pressure measurement.

• Journal of Power System Engineering
• /
• 제4권4호
• /
• pp.59-64
• /
• 2000

Especially, demands for the noise reduction of mold transformer has been becoming an common issue because it has been used mainly at the residence area such as building and ship. So, this paper investigates the noise source and countermeasure of mold transformer radiated high noise abnormally. The result of impact hammering test for core of transformer ascertains the core resonance by harmonics of line frequency and high noise can be reduced to avoid core resonance by changing torque strength of tie rod. Magnetic field analysis is performed to identify the reason that noise of V-phase is higher than U and W-phase in the normal condition. It is the cause that flux density and magnetic force of V-phase is higher than the other phase respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제3권3호
• /
• pp.671-679
• /
• 1999

In this paper, humidity measurement is accomplished using humidity sensor, dehumidify is implemented using general-purpose $\mu$-processorPIC16C54 and thermoelectric module for control measured humidity and input target humidity value proportionally Pottier module product is variety kind of size and characteristic, very important drawing factor is selection necessary heat sink, which is maintain proper thermal resistance from variety kind of module also. From electronic dehumidifier is manufacture by using thermoelectric module, no sound, no vibration, low power consumption of partial space efficient dehumidify proves the validity of this system.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.722-732
• /
• 2018

Dual type Independent multi-phase BLDC Motor (DI-BLDCM) is designed to be robust to faulty conditions of motor and drive system. Despite the efforts of the motor design, open-switch faults of DI-BLDCM drive system cause the torque ripple of the motor. This torque ripple makes unwanted sound noise and mechanical vibration of associated systems. This paper proposes four methods for compensating the torque ripple and compares the characteristics of each proposed method. All proposed methods are able to reduce the torque ripple to similar level of the healthy condition, although the motor operates in open-switch fault conditions. However, these methods have different characteristics in various fault conditions. Therefore, from the results of the comparison, the suitable method is selected for the various fault conditions. The feasibility of the proposed methods is proved by the several experimental results.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• Journal of KSNVE
• /
• 제4권2호
• /
• pp.187-198
• /
• 1994

This study is to describe the effects of the duct termination conditions conditions upon the active noise attenuation system. The adaptive filtering algorithm using FIR filter is implemented for duct noise attenuation. To avoid the instability caused by the acoustic feedback, two methods are considered. One is to use a compensating FIR filter. The other is to utilize uni-directional detecting microphone and uni-directional control speaker. Experimental results show that the reflections of sound from duct terminations greatly reduce the performance of ANC system. The directionality of detecting microphone and control speaker is a major factor to decide ANC performance. When there are some reflections from both duct terminations, the noise attenuation using finite FIR filter is not enough to model the duct plant. Especially, the reflection from the upstream termination reduces the noise attenuation in the frequencies related to the distance between control speaker and upstream termination. The performance of the noise attenuation is found to be largely enhanced by using uni-directional coupler, both on detecting microphone and control speaker, even if the duct system has an arbitrary termination conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.291-294
• /
• 2000

음파의 비선형 현상을 통해 수행되는 파라메트릭 송파 방식을 공기 중에서의 음향 변환기에 적용시키기 위해 비교적 공진 주파수가 낮은 기중 초음파 발생 소자들을 배열시켜 기중 지향성 음원을 제작하였다. 이 송파기를 이용하여 비선형 왜곡이 발생함을 알아보기 위하여 2kHz의 차주파수를 갖도록 37.12kHz와 39.12kHz의 메인 주파수 음파를 신호발생기로부터 인가하고 이를 방사한 후 마이크로폰을 통해 수신하였다. 공기 중에서의 파라메트릭 효과의 확인을 통하여 파라메트릭 송파기에서 방사되는 메인 주파수 음파와 전파 경로 중에서 생성되는 차주파수 음파의 거동을 고찰하고, 실험 결과로부터 기중 파라메트릭 송파기 개발의 가능성을 검토하여 보았다.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.182-187
• /
• 2002

Since most of main noise sources of the railroad vehicle are transmitted to the passenger's ear through the vibration of the panel, the insulation performance of the panels should be high enough to protect the passengers from the noisy environment. Specifically, the composite materials which are generally used for reducing the weight of the vehicle compartment have the low insulation performance, noise control actions should be taken appropriately by considering the insulation performance of the panels. In this study, the insulation performances of the inner/outer panels were evaluated and the contribution of the aluminum door was estimated compared to the composite panels. The results can furnish an indepth understanding of the insulation characteristics of the panel of railroad vehicle.

• Journal of Sensor Science and Technology
• /
• 제25권6호
• /
• pp.412-417
• /
• 2016

Scent display is used mainly to augment immersion, reality and emotion, besides provide more tension and suggestion. However, this paper pay attention to effect of smells as ambient media, and propose a notification service using scents without sound and vibration when a user has new mail, test message and phone call. And we designed a scent service platform and API function for easy application of scent notification service. We demonstrated feasibility by experiment using smart phone and self-producted scent device.