• 한국디지털건축인테리어학회논문집
• /
• 제12권4호
• /
• pp.87-95
• /
• 2012

Autoclaved lightweight concrete (ALC), also known as autoclaved aerated concrete (AAC), is a lightweight, precast building material that simultaneously provides structure, insulation. ALC is a unique building material. Because of its cellular nature, it is lightweight, self-insulating, as well as sound and fireproof. ALC products include blocks, wall panels, floor and roof panels, and lintels. Recently, the use of ALC has became increasingly popular. However, ALC have high water absorption, low compressive strength and popout the origin of the low surface strength in its properties. Thus, this study is to improve the fundamental strength by controls of increasing of admixtures and chemical reactants. Admixtures make use of meta kaolin and silica fume, chemical reactants make use of sodium silicate and sodium hydroxide. From the test result, the ALC using admixtures and chemical reactants have a good fundamental properties compared with plain ALC. These good fundamental properties is caused by the admixtures and chemical reactants of ALC by the reason of the micro filling effect and chemical binding of C-S-H gel, tobermolite and quartz.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.141-142
• /
• 2015

This literature study is focused on the improvement of lightweight concrete in perspective of foaming agent. Lightweight concrete is the cured concrete as putting required amount of foaming agent to slurry which is a mixture of a certain amount of cement, sand, and water. It has lower density than general concrete, because foaming agent disintegrates numerous bubbles evenly and independently. Thus, it is capable of lightening the weight and great for sound absorption and insulation, In foreign countries, studies for structural lightweight concrete mainly of tunnel grouting and weight lightening of heavy structures are going along actively. Domestically, exterior panel and ALC blocks are alternatively used for flooring. Therefore, this research consider improvement of lightweight concrete in perspective of foaming agent with foundation study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.323-330
• /
• 1994

본 연구에서는 다공질 흡음재료 중 closed cell 구조를 갖는 발포수지재료(Foamed Material)에 음(sound)이 입사할 때 발생하는 흡음현상을 보다 정확히 예측하기 위해서 다공질 흡음재료에 대한 Biot 이론에 근거한 Allard의 모델링기법[4]을 이용하여 해석 프로그램을 개발하였고, 이를 이용하여 다공질 흡음재료가 단층(single layer)일 때 이 재료의 Surface Impedance와 흡음률(Absorption Coefficient)을 예측하고, 물성치(parameters)변화에 따른 다공질 흡음재료의 흡음특성을 분석하였으며, 이 재료가 자동차 제조시 사용되는 압연강판(rolled steel piate)에 부착되었을 때의 투과손실(Transmission Loss)을 예측하였고, 또한 다공질 흡음재료는 중고주파 대역의 음에 대한 흡음특성은 좋지만 저주파 대역의 음에 대한 흡음특성은 좋지 않으므로 흡음 재료의 저주파 대역의 흡음특성을 향상시키기 위해서 2층(two layers)으로 하였을 때의 흡음특성을 분석하였다. 본 논문의 연구결과는 자동차 제조시 사용되어지는 다공질 흡음재료는 물론 산업용기계나 건축용등 여러 분야에서 사용되어지는 다공질 흡음재료의 흡음특성 분석에 응용될 수 있으리라 기대된다.

• 콘크리트학회지
• /
• 제10권1호
• /
• pp.171-178
• /
• 1998

본 연구는 폴리우레탄 콘크리트 패널의 바닥재로서의 이용 가능성을 검토하기 위하여 수행되었다. 따라서 각종 요구되는 성능에 부합되는 배합을 달리한 폴리우레탄 콘크리트를 제작하여 각종 물성 실험을 실시하였다. 또한 폴리우레탄 콘크리트 패널을 제작하여 직접 현장에서의 시공한 수 바닥충격음 실험을 실시, 그 효과를 평가하였다. 실험결과, 폴리우레탄 콘크리트의 성능과 코스트의 밸런스가 적절하게 확보된 최적배합비를 도출할 수 있었으며, 특히 기존 바닥구조에 비해 공동주택의 층간소음을 어느 정도 줄일 수 있고 동시에 시공공정의 단축과 단열효과로 보다 더 우수한 바닥난방구조를 제안할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.6-7
• /
• 2019

Asbestos has been widely used for construction materials due to its sound absorption and insulation properties. Despite the announcement that asbestos may cause cancer, asbestos demolition work has become more active. Asbestos was scattered by demolition work and the government started to regulate it. This study was started to predict the scattering asbestos concentration according to the research that it can cause cancer even if the concentration of asbestos meets legal standards. Therefore, in this paper, a regression analysis was conducted to derive a predictive equation after collecting and arranging the variables affecting scattering asbestos. As well as, artificial neural network analysis was used to make a more suitable prediction model.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.303-310
• /
• 2012

Heat treatment improves dimensional stability and sound absorption properties of wood. However, mechanical properties of wood can be deteriorated during the heat treatment. The effect of heat treatment on the bending strength and hardness of wood for Korean paulownia, Pinus densiflora, Lidiodendron tulipifera and Betula costata were measured. The heat treatment temperature has been investigated at $175^{\circ}C$ and $200^{\circ}C$, respectively. The results showed that the weight and density of wood decreased after heat treatment. It was found that the density by heat treatment was lower at $200^{\circ}C$ than that at $175^{\circ}C$. And, MOE increased with the reduced density. On the contrary, MOR and hardness decreased. In all conditions, It was found that there was a high correlation of 1% level between bending modulus of elasticity and modulus of rupture.

• 세라미스트
• /
• 제23권1호
• /
• pp.101-109
• /
• 2020

In this study, the phase transition behaviors of lead-free (Na_1/2Bi_1/2TiO₃)_(1-x)-(BaTiO₃)_x (NBT-BT) are investigated by using Brillouin spectroscopy. The elastic properties, sound velocity and absorption coefficient of NBT-BT are characterized as a function of temperature along different crystallographic axes. The temperature dependences of the elastic constants of NBT-BT near the morphotropic phase boundary are determined for the first time. The unpoled NBT-BT single crystals exhibits the typical relaxor behaviors, presenting broad acoustic and dielectric anomalies. The application of electric field induced discontinuous changes in the elastic properties at ~110℃, which indicates field-induced phase transition occurred. The electric field also changes the dielectric constant from more relaxor-like to ferroelectric-like dielectric behavior.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.137-144
• /
• 1997

발수제의 유무와 알루미늄분말의 분말도 및 첨가량을 조절하여 비중을 0.4에서 0.7로 변화시켜 비중과 ALC의 기초물성, 내동해성 및 내구성과의 관계를 조사하였다. 압축 및 인장강도는 비중이 0.4에서 0.7로 증가함에 따라 발수제의 첨가량에 관계없이 증가하였고 발수제의 첨가량이 증가하면 내동해성은 개선되었으며 흡수율은 감소하였다. 입경이 작은 AI분말을 이용항 제조한 ALC의 박리에 의한 체적감소율은 낮게 나타났으며 일면동결지속시험 및 기중동결수중융해시험에서도 내동해성이 우수한 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.77-78
• /
• 2022

To improve the fire vulnerability of the organic insulation sandwich panel core, which is the main culprit of the large-scale fire disaster, an experiment was conducted to examine the thermal conductivity properties of the core material mixed with the organic insulation material EPS Bead and the inorganic insulation material glass wool. As the Additional ratio of glass wool increased, the thermal conductivity decreased, and it was determined that the replacement of glass wool of 3% or more had little effect on the decrease in thermal conductivity. In addition, it can be seen that the most ideal thermal conductivity is exhibited when 1% Replacement ratio of EPS and 3% glass wool are added. The core material of such organic and inorganic insulation materials is judged to be a core material that can compensate for the fire vulnerability of existing insulation materials. Therefore, in order to determine whether it is used as a core material for sandwich panels, additional studies such as fire resistance experiments and sound absorption experiments are needed in the future.