• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권4호
• /
• pp.293-298
• /
• 2006

A study on the feasibility of using improved computer-controlled HPLC and GC systems was carried out to shorten the time needed for measuring levels of the substrates (glucose, maltose, and glycerol) and products (acetone, butanol ethanol, acetic acid, and butyric acid) produced by Clostridium saccharobutylicum DSM 13864 during direct fermentation of sago starch to solvent. The use of HPLC system with a single injection to analyse the composition of culture broth (substrates and products) during solvent fermentation was achieved by raising the column temperature to $80^{\circ}C$. Although good separation of the components in the mixture was achieved, a slight overlap was observed in the peaks for butyric acid and acetone. The shape of the peak obtained and the analysis time of 26.66 min were satisfactory at a fixed flow rate of 0.8mL/min. An improved GC system was developed, that was able to measure the products of solvent fermentation (acetone, butanol, ethanol, acetic acid, and butyric acid) within 19.28 min. Excellent resolution for each peak was achieved by adjusting the oven temperature to $65^{\circ}C$.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.138-144
• /
• 2012

Detergency and soil redeposition of wool fabric in 8 nonionic surfactants (Span 20, 40, 60, 80/Tween 20, 40, 60, 80) and 4 solvents (water, petroleum, perchloroethylene(PCE), decamethylcyclopentasiloxane($D_5$)) were studied. Detergency of wool fabric in water was very low with and without surfactants due to the low wetting and difficulty in penetration of water into the fabric. Lipophilic surfactants improved the detergency of wool fabric in petroleum solvent and PCE. The detergency of wool fabric in $D_5$ was similar to that in petroleum solvent without surfactants. When water was solubilized, Span 20 addition to petroleum solvent and PCE increased the detergency of wool fabric. The detergency for $D_5$ was improved with solubilized water, however, it was lowered when the surfactants were added to the system. Therefore, it is important to formulate appropriate detergents which have good solubility and affinity to silicone for $D_5$ charge system. Hydrophilic surfactants were effective for water and lipophilic surfactants were effective for petroleum solvent and PCE in soil redeposition prevention of wool fabric. The soil redeposition prevention effects are not found in $D_5$ with both Span 20 and Tween 20. The same tendency of results in soil redeposition of wool fabric is observed when water is solubilized.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권6호
• /
• pp.426-432
• /
• 2001

Perstractive fermentation is a good way to increase the productivity of bioreactors. Us-ing Propionibacteria as the model system, the feasibility of using supported emulsion liquid mem-brane(SELM) fro perstractive fermentation is assessed in this study. Five industrial solvents were considered as the solvent for perparing the SELM. The more polar a solvent, is the higher the par-tition coefficeint However, toxicity of a solvent also increases with its polarity. CO-1055(indus-trial decanol/octanol blend)has the highest partition coefficient toward propionic acid among the solvents that has no molecular toxicity toward Propionibacteria, A preliminary extraction study was conducted using tetradecane as solvent in a hydrophobic hollow fiber contactor. The results confirmed that SELM eliminates the equilibrium limitation of conventional liquid-liquid extrac-tion and allows the use of a non-toxic solvent with low partition coefficient.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.299-305
• /
• 2015

In this paper, we propose a simple and low-cost fabrication method of polymer microlens using solvent-vapor-assisted reflow (SVAR). Metal molds for replication of polymer were fabricated using micro milling and the cylindrical shape of polymer was imprinted using hot-embossing process. The cylindrical shape of polymer was changed to hemispherical lens shape by SVAR. The characteristics of fabricated microlens were evaluated according to the condition of SVAR such as temperature and time. The focal length of polymer microlens could be controlled more easily in low-temperature and long-time condition than in high-temperature and short-time condition. That is, the level of concentrated light to focal point could be improved through the control of temperature and time. Also, we confirmed that toluene was more appropriate solvent than acetone in fabrication of PMMA polymer microlens using SVAR.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.14-23
• /
• 2018

The effect of dodecylbenzene sulfonic acid (DBSA) with different addition amount of DBSA ($M_{DBSA}$), temperatures and solvent-to-oil ratio (SOR, v/v) on asphaltene aggregation in a solvent deasphalting system was investigated. Increasing the $M_{DBSA}$ at SOR 10 and $55^{\circ}C$ caused the asphaltene removal ratio (ARR) to increase first, then maximize at 1 wt% of $M_{DBSA}$ and then decrease continuously. Based on the SARA (saturate, aromatic, resin, asphaltene) composition, the adsorption amount of DBSA on the asphaltene surface and the self-aggregation of the DBSA, the reason for the change in ARR with $M_{DBSA}$ was found due to the adsorption mechanism. In addition, the asphaltene-resin-DBSA colloidal size confirmed the change of adsorption behavior between the asphaltene and DBSA. Based on the results of this study, a hypothetical adsorption mechanism of DBSA on asphaltene aggregation in the solvent deasphalting system was conceived of and proposed.

• 약학회지
• /
• 제5권1호
• /
• pp.20-23
• /
• 1960

The study of the isolative determination of the mixed weak bases of INAH and NA-Pas potentimetrically considering the properties of solvents for the INAH and Na-PAS, dielectric constant and solvative properties of solvents are described. The methanol: dioxan (4:1) and glacial acetic acid: dioxan (4:1) are studied first as the mixed solvent, using the N/10 perchloric acid and glacial acetic acid solution as the titrant. The authors found that there is no inflection on INAH with the methanol: dioxan solvent system and on Na-PAS at glacial acetic acid dioxan solvent system. By applying methanol glacial acetic acid dioxan (1:1:1) solvent system, Na-PAS and INAH were successfully determined isolatively from the mixed sample, showing the distinguished inflections respectively as shown in the titration curves in figures 3 and 4. It is found that this method could save considerable time for the isolative determination of the mixed sample of week bases as Na PAS and INHA which were quite difficult to be determined by the present routine at control laboratory.

• Bulletin of the Korean Chemical Society
• /
• 제4권2호
• /
• pp.87-91
• /
• 1983

Molecular dynamic method has been applied to a single polymer chain immersed in a solvent. The interactions for the pairs, of two solvent molecules (SS), of a chain element and a solvent molecules (CS), and of two non-neighbor chain elements (CC) are given by the Lennard-Jones potential, and the interaction between two bonded chain elements is given by a harmonic potential. We changed the CS interaction parameter ${\varepsilon}_{CS}$ to 0.5, 1.0 and 2.0 times of the SS interaction ${\varepsilon}_{SS}$. We calculated the pair correlation functions for the SS, CS, and CC pairs, end-to-end distance and radius of gyration with the varying ${\varepsilon}_{CS}$ parameters. The results showed that a phase separation occurs between the polymer and solvent in the 0.5 system where ${\varepsilon}_{CS}$ = 0.5 {\varepsilon}_{SS}$. The autocorrelation functions for end-to-end distance and radius of gyration were also calculated.

• Mass Spectrometry Letters
• /
• 제14권2호
• /
• pp.36-41
• /
• 2023

A simple method was developed to determine residual p-arsanilic acid (ASA), an organo-arsenic compound used as a feed additive, in aquatic products (eel, halibut, and shrimp) using EDTA-assisted solvent extraction and LC-MRM. The method was successfully validated in terms of specificity, linearity (coefficient of determination ≥ 0.995), accuracy (recovery or R, 72.72-78.73%), precision (the relative standard deviation of R, 2.08-6.98%), and sensitivity (the lower limit of quantitation, 5 ppb) according to CODEX guidelines (CAC-GL 71-2009). The use of EDTA in the extraction solvent and water with a suitable pH modifier as the reconstitution solvent may be the key factors for successful results. This is the first method that can be used for monitoring residual ASA in aquatic products using LC-MRM and could contribute to establishing a better aquatic product safety management system.

• 한국식품과학회지
• /
• 제36권3호
• /
• pp.518-521
• /
• 2004

이상계 용매시스템을 이용하여 물질을 고순도로 대량 분리 할 수 있는 기술인 countercurrent chromatography를 이용하여 인삼으로부터 생리황성 성분인 saponin을 대량 분리 농축하였다. 용매 조성별 인삼 saponin의 분배계수에 따른 인삼 saponin 분리에 적합한 용매시스템은 chloroform/methanol/water(40/39/21, v/v/v)으로 결정되었으며 HSCCC의 작동 조건은 chloroform/methanol/water 용매시스템의 하층부를 이동상으로 한 head to tail mode에서 이동상의 유속 5mL/min, 인삼추출물 injection량 $200{\mu}L$, 컬럼회전속도 800 rpm의 조건이 적합한 것으로 판단되었다. 이러한 조건하에서 분리된 인삼saponin의 양은 $550.7{\mu}g$으로 HSCCC에 주입한 인삼 추출물 $200{\mu}L$중에 존재하는 총 saponin의 양 $865.5{\mu}g$에 비교하여 전체 수율은 63.6%로 나타났으며 TLC로 각 분획의 순도를 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1543-1546
• /
• 2011

N-Bromosaccharin/$Mg(ClO_4)_2$ is an effective and regioselective system for ${\alpha}$-monobromination of 1,3-dicarbonyl compounds. A wide variety of ${\beta}$-keto esters and 1,3-diketones in reaction with this system afforded a regioselectively ${\alpha}$-monobrominated products. The bromination reaction can be conducted at 0-5 $^{\circ}C$ either in solution or under solvent-free conditions.