• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.198-205
• /
• 2014

The present paper investigates the leaching property of coal fly ash (FA) using distilled water as solvent and its performance of mineral carbonation. The highest leaching efficiency is obtained at 100 min after leaching begins and the overall leaching efficiencies of Ca and Na via five consecutive leachings were calculated to be 25.37% and 7.40%, respectively. In addition, because $Ca(OH)_2$ produced during the leaching reacts with $SiO_2$ which is the major component of FA, the Pozzolanic reaction may occur and thus reduces leaching efficiency. Total carbonation capacity of FA by absorbing $CO_2$ into FA leachates is 6.08 mg $CO_2/g$ FA and the contribution of alkali substances such as Ca, Na, Mg and K to this value is calculated to be 5.19 mg $CO_2/g$ FA. Carbonation efficiencies of Ca and Na based on leachates are 85.62% and 77.70%, respectively. On the other hand, the ratios of Ca and Na in raw FA to participate in carbonation are calculated to be 9.04% and 5.26%, respectively.

• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.28-36
• /
• 2005

A hydrometallurgical process to leach cobalt from the waste cathodic active material, $LiCoO_{2}$, and subsequently to separate it by solvent extraction was developed. The optimum leaching conditions for high recovery of colbalt and lithium were obtained: 2.0 M sulfuric acid, 5 $vol.\%$ hydrogen peroxide, $75^{\circ}C$ leaching temperature, 30 minutes leaching time and an initial pulp density of 100 g/L. The respective leaching efficiencies for Co and Li were $93\%$ and $94.5\%$. About $85\%$ Co was extracted from the sulfuric acid leach liquor containing 44.72 g/L Co and 5.43 g/L Li, using 1.5 M Cyanex272 as an extractant at the initial pH 5.0 and in organic to aqueous phase ratio of 1.6:1 under the single stage extraction conditions. The Co in the raraffinate was completely extracted by 0.5 M Na-Cyanex272 at the inital pH 5.0, and an organic to aqueous phase ratio of 1;1. The cobalt sulfate solution of higher than $99.99\%$ purity could be recovered from waste $LiCoO_{2}$, using a series of hydrometallurgical processes: sulfuric acid leaching of waste $LiCoO_{2}$- solvent extraction of Co by Na-Cyanex 271 - scrubbing of Li by sodium carbonate solution - stripping of Co by sulfuric acid solution.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2000

Consumption of nickel is continuously increasing and the wastes of secondary battery, ferrite and catalyst containing Ni are also generated periodically. Among those wastes, the aim of this research is the recovery of nickel from used Ni-Cd recharge battery. Battery consisted of Ni 24 wt%, Fe 30 wt% and Cd 18.5 wt%. Metal was recovered by solvent extraction after leaching. Cadmium was leached completely in 1N-HCl and Ni was recovered above 70%. 30 vol% MSP-8 separated Cd and Ni completely from acidic leaching solution. In addition $NH_4NO_3$ as one of ammonium salt type leachants showed an excellent leaching selectivity to Ni and Cd. Ni in leached solution was recovered completely by LIX-extractant and more than 70% of Cd in raffinate was by D2EHPA.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.1-4
• /
• 2004

On the background of general idea and technique of bioscience, medicine and engineering, tissue engineering aim at maintenance, improvement and repair of human body function through manufacturing and transplantation of artificial tissue and organ exchangeable human body. Basic material used in the area is scaffold that aid tissue and organ formation. Making scaffold, solvent-casting and particulate leaching technique is widely used in manufacturing of porous polymer scaffold. There are many types of particle including salt and gelatin. Salt is a most commonly used particulate because it is easily available and very easy to handle and gelatin particle is another candidate for this method because it is known as a material, which enhances cell attachment and proliferation. But there is no comparative study of two kinds of materials. In this study we compared the biocompatibility of the two scaffolds made from salt(salt scaffold) and gelatin particle (gelatin scaffold). These results demonstrated that gelatin scaffold showed better attachment of cells at the initial stage and better proliferation of cells. The better performance of gelatin scaffold is contributed to the better connection of pores in the same porosity.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.312-319
• /
• 1998

The dilute-acid pretreatment/hydrolysis of hemicellulose in oak wood using a percolation reactor was investigated. The experimental conditions ranged 160∼180$^{\circ}C$ and 0.05∼0.2 wt.% sulfuric acid. XMG(xylan+mannan+galactan) recovery was higher when sulfuric acid was used as leaching solvent than water. Also it was important for high XMG recovery to keep leaching temperature higher after reaction. XMG recovery was decreased as the size of wood chips was increased. At an optimum condition (reaction condition= 170$^{\circ}C$, 0.1% sulfuric acid, 1ml/min, 10min, leaching condition=0.1% sulfuric acid, 2mL/min, 20 min), the product yield and the sugar concentration were about 92% and 2.7%, respectively.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.44-51
• /
• 2009

Fundamental study has been made on the recovery of copper from the electronic scrap by hydrometallurgical process. Nitric acid was used as a leaching agent to dissolve the metals such as Cu, Sn, Pb, Fe etc. from the crushed electronic scraps. TBP was employed to extract nitric acid from the strong nitric acid leaching solutions and to reclaim nitric acid. From the experimental results, Cu was effectively leached by 3.0-4.0 M nitric acid. And 95% of nitric acid in the leaching solution was extracted by 60% TBP, and 98% of nitric acid was stripped from the loaded organic phase by distilled water and it was possible to reuse as a leaching agent.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.22-28
• /
• 2000

A study on the recovery of gallium from zinc residues is carried out by alkali leaching using NaOH. The results show that in case of alkali leaching of zinc residues, Zn, K and Si are mainly leached out and Fe and other base metals are scarcely leached out, which results in that gallium is easily recovered by solvent extraction. The leaching efficiency of gallium increases with increasing alkali concentration and solid density. Especially, alkali consumption is considerably reduced by washing the zinc residues with water before leaching in order to eleminate the soluble zinc compounds. The gallium from zinc residues is found to be leached out with a recovery of 80% or higher for 2hrs leaching with 1~1.25 M/L NaOH solution and solid density 333 g/L at $25^{\circ}C$.

• Resources Recycling
• /
• v.24 no.5
• /
• pp.56-62
• /
• 2015

Solvent extraction experiments for the separation and recovery of Re from hydrochloric acid leaching solution of spent super alloy by Alamine 304-1 were carried out. The effects of some variables, such as the nature and concentration of the extractants, HCl concentration, and the presence of impurities were investigated. The synthetic solutions of Re were prepared by dissolving ammonium perrhenate (APR), Alamine304-1, Cyanex272 and $D_2EHPA$ were used solvent extractants distilled in kerosene. The extraction percentage of Re by Alamine304-1 was higher than the other extractants as Cyanex272 and $D_2EHPA$ and the percentage is about 99%. Only 99% of Re was extracted in the presence of Al, Co and V in HCl solution.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.29-36
• /
• 2000

A study on the recovery of gallium from leaching solutions is carried out by solvent extraction in order to produce gallium oxide of high purity. The results show that the extraction of gallium is found to be increase with acidities of aqueous solution up to 7.4 M/L when pure isopropyl ether is used. And the extraction of iron also increases with increasing acidity of aqueous solution. It appears that the separation of gallium from iron cannot be satisfactorily accomplished with isopropyl ether. But, in the case of extaction with D2EHPA, almost complete extraction of iron is achieved-leaving all the gallium in the aqueous solution-by maintaining the acidity of aqueous solution at 2 M/L. Accordingly, $Ga_2O_3{\cdot}H_2O$ of more than 99wt.% in purity can be produced from zinc residues through the processes comprising of alkali leaching, precipitation by neutralization and solvent extraction using isopropyl ether and D2EHPA as extractants.