• 생약학회지
• /
• 제30권3호
• /
• pp.275-279
• /
• 1999

The solvent extracts from Aloe arborescens and Aloe vera were randomly screened for inhibitory effects on the growth of tumor cell lines. In case of Aloe vera extracts, butyl alcohol extract and ethyl alcohol extract showed antitumor activity at $100\;{\mu}g/ml$ on lung cell lines(A427, Sk-mes-1, Calu-3 and 3LL). In Aloe arborescens extracts, butyl alcohol extract and ethyl alcohol extract exerted high activity at $100\;{\mu}g/ml$ on breast cell line(Hs-578T) and lung cell line(Sk-mes-1), respectively. The solvent extracts from Aloe vera exerted antitumor activity broadly on various tumor cell lines. In contract, the solvent extracts from Aloe arborescens exerted specific antitumoricity on a few tumor cell lines.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1346-1350
• /
• 2004

Pseudo-first order rate constants $(k_{obs})$ are reported for the following solvolyses in approximately isodielectric mixtures: 3- and 4-methoxybenzyl chloride, bromo- and chlorodiphenylmethane, and 4-chloro-, 4,4'-dichloro and 4-methyl-chlorodiphenylmethane in 0-80% v/v nitromethane-methanol mixtures; and bromo- and chlorodiphenylmethane and 4-methyl-chlorodiphenylmethane in various acetonitrile-methanol mixtures (in the range 0-50% v/v) at$25^{\circ}C.$ These data, and literature data for t-butyl halides (Cl, Br, and I), and for p-methoxybenzoyl chloride, show rate maxima in solvent compositions of ca. 30% aprotic cosolvent, explained by a stoichiometric solvent effect on electrophilic solvation. Linear relationships are observed between $(k_{obs})/[MeOH]^2$ and [AP]/[MeOH], where [AP] refers to the molar concentration of aprotic cosolvent. The results are consistent with competing third order contributions to $k_{obs}$, $k_{MM}[MeOH]^2$ with hydrogen-bonded methanol as electrophile, and $k_{MAP}[MeOH][AP]$ with hydrogen-bonding disrupted by the aprotic solvent.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.283-292
• /
• 2023

Currently, spray coating has attracted interest in the mass production of anode catalyst layers for proton exchange membrane water electrolysis (PEMWE). The solvent in the spray ink is a critical factor for the catalyst dispersion in ink, the microstructure of the catalyst layer, and the PEMWE performance. Herein, various pure organic solvents were examined as a substitute for conventional isopropanol-deionized water (IPA-DIW) mixture for ink solvent. Among the polar solvents that exhibited better IrO₂ dispersion over nonpolar solvents, 2-butanol (2-BuOH) was selected as a suitable candidate. The PEMWE single cells were fabricated using 2-BuOH at various ionomer contents, spray nozzle types, and drying temperatures, and their performance was compared to the cells fabricated using a conventional IPA-DIW mixture. The PEMWE single cells with 2-BuOH solvent showed good performances comparable to the conventional IPA-DIW mixture case and highly durable performances under accelerated degradation tests.

• 에너지공학
• /
• 제17권1호
• /
• pp.38-45
• /
• 2008

본 연구는 캐나다산 아사바스카 오일샌드 역청(Athabasca Oilsands Bitumen)의 용매 불용분 실험(Solvent-Insolubles Experiment)을 통하여 아스팔텐(Asphaltenes : Solvent-Insolubles) 및 말텐(Maltenes : Solvent-Solubles)에 대한 다양한 물리 화학적 특성변화를 살펴보기 위하여 수행되었다. 용매는 n-Heptane, n-Hexane, n-Pentene의 3가지 용매를 사용하였고, 아스팔텐의 분리는 ASTM D 3279 방법을 응용하여 실시하였다. 역청, 아스팔텐, 말렌에 대한 분석항목은 원소분석, 분자량 분포, 비점 분포, 중금속 함량, API 비중, 점도, SARA 분포 등이다. 분석 결과 모든 말텐의 황 함량, 중금속 함량 및 분자량은 역청에 비하여 낮은 경향을 보였다. 그리고 n-Pentane 용매를 사용한 경우가 다른 용매에 비하여 말텐의 점도가 감소하였고, 황, 중금속 함량 및 분자량도 상대적으로 낮게 측정되었다. 따라서, 본 실험결과는 합성원유(SCO) 생산을 위한 역청의 경질화 공정에 필요한 기초자료로 활용할 수 있다고 판단된다.

• 에너지공학
• /
• 제28권4호
• /
• pp.8-12
• /
• 2019

Thermal amine scrubbing is the most advanced CO₂ capture technique but its largescale application is hindered due to the large heat requirement during solvent regeneration step. The addition of a solid metal oxide catalysts can optimize the CO₂ desorption rate and thus minimize the energy consumption. Herein, we evaluate the solvent regeneration performance of Monoethanolamine (MEA) and Diethanolamine (DEA) solvents without and with two metal oxide catalysts (TiO₂ and V₂O₅) within a temperature range of 40-86℃. The solvent regeneration performance was evaluated in terms of CO₂ desorption rate and overall amount of CO₂ desorbed during the experiments. Both catalysts improved the solvent regeneration performance by desorbing greater amounts of CO₂ with higher CO₂ desorption rates at low temperature. Improvements of 86% and 50% in the CO₂ desorption rate were made by the catalysts for MEA and DEA solvents, respectively. The total amount of the desorbed CO₂ also improved by 17% and 13% from MEA and DEA solvents, respectively. The metal oxide catalyst-aided regeneration of amine solutions can be a new approach to minimize the heat requirement during solvent regeneration and thus can remove a primary shortfall of this technology.

• 공업화학
• /
• 제20권3호
• /
• pp.346-350
• /
• 2009

자연상태의 물질들은 많은 유용한 성분들을 포함하고 있다. 이 성분들 중에서, 천연 영양 성분들은 기능성 식품 또는 화장품, 의약품의 첨가제로써 활용 되고 있다. 이러한 영양성분들을 유용하게 활용하기 위해 각 성분들에 대한 최적의 용매 선택방법을 제시하였다. 각 성분에 대한 용해도 파라미터를 계산하였으며 총 용해도 파라미터는 분산성, 극성, 수소결합 효과로 구성되고 이들 기여도가 각각 계산되었다. 용질과 용매의 용해도 파라미터에 의해 chi(${\chi}_{12}$)파라미터가 결정되었으며 chi파라미터에 의해 아미노산 성분들에 대한 최적의 용매-용질쌍이 선정되었다.

• Advances in Energy Research
• /
• 제4권4호
• /
• pp.325-337
• /
• 2016

Cerbera Odollam (sea mango) is a proven promising feedstock for the production of biodiesel due to its high oil content. Fatty acid methyl esters (FAME) were produced as the final reaction product in the transesterification reflux condensation reaction of sea mango oil and methyl acetate (MA). Potassium methoxide was used as catalyst to study its reacting potential as a homogeneous base catalyst. The initial part of this project studied the optimum conditions to extract crude sea mango oil. It was found that the content of sea mango sea mango oil was 55%. This optimum amount was obtained by using 18 g of grinded sea mango seeds in 250 ml hexane. The extraction was carried out for 24 hours using solvent extraction method. Response surface methodology (RSM) was employed to determine the optimum conditions of the reaction. The three manipulated variables in this reaction were the reaction time, oil to solvent molar ratio, and catalyst wt%. The optimum condition for this reaction determined was 5 hours reaction time, 0.28 wt% of catalyst and 1:35 mol/mol of oil: solvent molar ratio. A series of test were conducted on the final FAME product of this study, namely the FTIR test, GC-FID, calorimeter bomb and viscometer test.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.81-85
• /
• 2002

Small angle light scattering and field emission scanning electron microscope have been used to quantify the kinetics of liquid-liquid separation behavior during water vapor(RH52%[$\pm$3%] at 27$^{\circ}C$) quenching (non-solvent induced phase separation, NIPS) of polysulfone/NMP/Alcohol and CPVC/THF/Alcohol, respectively. Time dependence of the position of the light scattering maximum was observed at polysufone dope solutions, confirming spinodal secomposition (SD). while CPVC dope solutions showed a decreased scattered light intensity with a increased q-valuel, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahns linear theory of spinodal decomposition,[1-3] regardless of types of non-solvent additive.

• 공업화학
• /
• 제25권2호
• /
• pp.147-151
• /
• 2014

많은 고분자 공정에서 고분자에서의 유기 용매와 같은 저분자 물질의 확산은 중요하다. 고분자에서의 저분자 물질의 이동은 중합 반응기의 효율성과 제조된 고분자의 특성을 결정한다. 공정을 설계하고 최적화하는데 중요한 물성값은 고분자/용매 상호확산 계수이다. 용매의 농도가 매우 낮은 무한희석 상태에서의 고분자/용매 계의 무한확산계수를 측정하기 위해서 capillary column inverse gas chromatography (CCIGC) 기법이 흔히 사용된다. 이 기법을 사용하면 비교적 짧은 시간에 확산계수와 분배계수를 측정하는 것이 가능하다. 본 연구에서는 CCIGC 기법을 사용해서 styrene/butadiene/styrene (SBS) 블록 공중합체에서 환형 구조를 가지는 용매의 확산계수와 분배계수를 다양한 온도 범위에서 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.12-16
• /
• 2015

$(Na,K)NbO_3$-based piezoelectric ceramics were synthesized by a solid phase sintering method with various milling solvents. The solvents were varied with acetone, ethanol, and pure water to investigate the effect on the microstructure and electrical properties. NKN ceramics showed the maximum values of the relative density (94%), the mechanical quality factor (Qm: 78) and the electro-mechanical coupling factor ($k_p$: 0.25) at the ethanol solvent. It might mean that a solid phase sintering of the NKN piezoelectrics with a suitable solvent could improve the relative density and the piezoelectric properties.