• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.85-92
• /
• 1993

Large single crystals of olivine were grown by using image furnace(floating zone furnace)under controlled partial pressure of oxygen. The transparent crystals have maximum sizes 65mm in length by 7mm in diameter. When partial pressure of oxygen was decreased, the portion of secondary phases in crystals were increased so that it made crystals dark brown. The secondary phases were proved to be solid solution of Mg, Si, and Fe by electron microprobe analysis. Mg was major portion and the rest was minor.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.20-29
• /
• 1992

In $BaTiO_3-NaNbO_3$ system, complete series of solid solution occurs and $30BaTiO_3{cdot}70NaNbO_3$ composition is congruently melted. Single crystals of $30BaTiO_3{cdot}70NaNbO_3$, composition were grown by Czochralski method in this investigation. Single crystals with dimensions of 15 - 20mm diameter and 20 - 30mm length, were grown at the pulling rate of 2.0mm/h and the rotation rate of 5.0 -l0rpm. Core structures were found in the grown crystals and inclusions, cellular boundaries existed at the core region. The origin of core occuring was unstability of the crystal- melt interface due to the poor conductivity of latent heat through the crystal during the crystal growing process. Obtained crystals were optically homogeneous except the core region and showed high optical transmittance in the visible range.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.1-14
• /
• 1991

In growing single crystals, which exhibit incongruent melting behavor, it is extremely difficult to maintain the stoichiometry of its chemical compositions for given crystals. For instance, $LiNbO_3$ is a typical one which exhibits such incongruent melt, especially with a large solid solution region that makes it difficult to maintain the chemical compositions. Such a variation can then cause a serious problem for the practical applications in designing a precision electro /optic device. Of the known methods of determining its composition and quality, an optical technique of measuring refractive index of the crystals has been implemented. This technique is also capable of determining optical uniformity of the grown crystals and the chemical compositions. The technique used for such characterizations is herein described and some of results are discussed.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.177-183
• /
• 2006

The hydrolytic kinetics of biodegradable poly(l-lactide) (PLLA) have been studied by using two model systems, solution-grown single crystal (SC) and Langmuir monolayer techniques, for elucidating the mechanism for both alkaline and enzymatic degradations. The present study investigated the parameters such as degradation medium and time. The Langmuir mono layers of PLLA showed faster rates of hydrolysis when they were exposed to a basic subphase rather than they did when exposed to neutral subphase. Both degradation mediums had moderate concentrations to show a maximized activity, depending on their sizes. An alkaline degradation of SCs of PLLA showed the decrease of molecular weight of the remained crystals due to the erosion of chain-folding surface. However, the enzymatic degradation of SCs of PLLA occurred in the crystal edges thus the molecular weight of remained crystals was not changed. This behavior might be attributed to the size of enzymes which is much larger than that of alkaline ions; that is, the enzymes need larger contact area with monolayers to be activated.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.397-402
• /
• 2012

Morphological control on hydroxyapatite crystals has attractive prospects in research to clarify the effects of crystal planes on biological performance. Hydrothermal processing is known as a typical type of processing for fabricating well-grown crystals with unique morphology. The purpose of the present study is to examine the feasibility of well-crystallized crystals with oriented structures through hydrothermal treatment of calcite. A single crystal of calcite was applied to hydrothermal treatment in a phosphate solution at $160^{\circ}C$. Rod-shaped hydroxyapatite crystals with micrometer-size were formed on the {100} face of calcite after treatment, while nanometer-sized hydroxyapatite crystals were formed on the (111). The hydroxyapatite crystals formed on each plane were not morphologically changed with increasing treatment periods. An oriented structure of rod-shaped hydroxyapatite was constructed after hydrothermal treatment of {100} planes on the calcite single, while such orientation was not observed on the (111) plane after the treatment. The layer of hydroxyapatite formed on the {100} plane was thicker than that of the (111) plane. The {100} plane of calcite shows a higher reactivity than that of the (111) plane, which results in rapid crystal growth of hydroxyapatite. The difference in the morphology of the formed hydroxyapatite was governed by the reactivity of each crystal plane exposed to the surrounding solution.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.149-155
• /
• 1997

We have successfully grown colorless and transparent Rb-doped potassium niobate (KRN) single crystals using the top seeded solution growth(TSSG) technique. In our crystal growth experiments, the Rb doping concentrations within the melt range from 2-15 mol% relative to that of Nb$_2$O5. Atomic absorption measurements indicate that the Rb content in the KRN solid solution is rather low; the Rb segregation coefficient is found to be on the order of 0.05. It is believed that this is due to the relatively much larger Rb+ ionic radius compared to that of K+, rendering it more difficult for Rb to replace K in the KNbO$_3$(KN) host lattice. Preliminary single-pass second harmonic generation (SHG) experimental results indicate that there exists marginal improvement in the phase-matching temperature tolerance of KRN compared to that of pure Kn single crystals.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.7-10
• /
• 1998

L-Histidine tetrafluoroborate single crystals have been grown from the aqueous solution. The profitable pH value to grow large crystals, the relative flow rate to get clear crystals, crystals habit and the orientation of the obtained crystal have been clarified. We have also demonstrated that the LHBF crystal has very high damage threshold which is potentially good for generation of the phase conjugated waves.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.227-250
• /
• 1999

The reproducibility of successive growth of Bi12TiO20(BTO) single crystals using a top-seeded solution growth (TSSG) pulling method was evaluated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established experimentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasize that a starting solution, with a 10.0~10.1 mol% TiO2 concentration, results in large single crystals with a highly homogeneous lattice constant of within $\pm$1x10-4$\AA$, when the solidified fraction of the grown crystal is less than about 45%. A wavelength dispersion of refractive index was measured for the first time, an it was verified that the refractive index of BTO is larger than that of BSO(Bi12TiO20), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.167-185
• /
• 1999

In the present paper, KLN crystals have been grown along <001>, <100> and <110> directions by the top seeded solution growth (TSSG) method from Li-richer melts with different compositions. The morphologies of KLN crystals grown along different directions have been studied, and the well-developed facets have been unambiguously indexed using X-ray goniometer and stereographic projection analysis. The growth mechanism and defects such as cracks and inclusions were discussed on the basis of observations of facets on the crystal-melt interfaces. The crystal compositions were determined by chemical analysis method. The structure and lattice constants of KLN crystals were determined and calculated on the basis of XRD data by using TREOR90 and PIRUM programs. The Curie temperature and optical absorption were determined by dielectric constant peak and spectrum measurements, respectively. The blue SHG characteristics of a KLN sample were also investigated using a pulsed dye laser. PACS: 42.70.M;81.10;81.10A;42.65.K.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.223-229
• /
• 1994

$KTP(KTiOPO_4)$ single crystals have been hydrothermally grown in KOH solutions. Properties and Raman spectra of grown crystal were investigated. The most effective solvents for the crystal growth of KTP were KOH and KF solutions. In this study, the properties of KTP single crystals grown hydrothermally at $500^{\circ}C$ in 9 m KOH solution were measured. The following results were obtained : lattice parameters ; a=1.281 nm and c=1.058 nm, density ; $2.94 g/cm^3$, Vickers hardness ; $562kg/cm^2$, refractive indices ; $n_e=1.740$ and $n_e= 1.747.$ And Raman spectra of hydrothermal growth KTP single crystal have been investigated at room temperature under atmospheric pressure. As a result, the $A_1$ modes agree very well with KTP single crystal of high temperatures solution growth but the behavior of $B_2$ modes were slightly different.