• 제목/요약/키워드: solution leakage

검색결과 403건 처리시간 0.03초

막과산화를 신속히 유발하는 제초제의 고효율 대량스크리닝을 위한 형광검정법 (Fluorescence Assay for High Efficient Mass Screening of the Herbicides Inducing Rapid Membrane Peroxidation)

  • 김진석;권옥경
    • Weed & Turfgrass Science
    • /
    • 제4권4호
    • /
    • pp.308-314
    • /
    • 2015
  • 본 연구는 식물세포막을 파괴시켜 제초활성을 나타내게 하는 화합물(막과산화형 제초제)을 미지의 많은 화합물로부터 신속하게 탐색하기 위한 새로운 검정법을 확립하기 위하여 실시되었으며, 확립한 전체적인 검정과정은 다음과 같다. 96-well microplate에 시험용액 $200{\mu}L$ 넣고 여기에 오이자엽으로부터 적출한 직경 4 mm의 절편 1개씩을 띄운다. 항온실의 광조건 하에서 회전진탕기로 조금씩 흔들어주면서 8시간 배양한 후 절편을 제거한 다음, 배양액에 HVA와 HRP를 첨가하여 반응시킨 후 마이크로평판용 형광검출기를 이용하여 형광도(Ex 320 nm, Em 425 nm)를 측정한다. 형광변화량이 높을수록 제초활성이 높은 것으로 판단한다. 본 방법은 96-well microplate에서 작업을 수행할 수 있고 형광검출 기술을 이용함으로써 검정과정과 작업을 간편하게 하여 검정효율을 기존보다 현저히 높인 것이 특징이다. 아울러 활성검정을 추출된 효소가 아닌 잎 절편수준에서 수행하기 때문에 보다 실용화에 근접한 정량적 데이터를 얻을 수 있는 장점을 가진다.

복합레진 수복물의 변연 미세누출에 관한 BiscoverTM 전색제의 효과 (EFFECT OF BISCOVER ON THE MARGINAL MICROLEAKAGE OF COMPOSITE RESIN RESTORATION)

  • 조영곤;최희영
    • Restorative Dentistry and Endodontics
    • /
    • 제30권5호
    • /
    • pp.355-362
    • /
    • 2005
  • 본 연구는 복합레진을 광조사하기 전과 광조사한 후에 표면 전색제인 Biscover를 적용하여 이들에 대한 변연 미세누출을 평가하고, 또한 표면 전색제를 적용하지 않는 복합레진 수복물과의 미세누출 차이를 비교하기 위하여 시행하였다. 30개의 발거된 대구치의 협면 치경부에 5급 와동을 형성하여 다음과 같이 3개의 군으로 분류하였다; 대조군은 복합레진 표면에 Biscover를 적용하지 않은 군, 1군은 복합레진을 광조사하고 마무리한 후 Biscover를 적용한 군, 2군은 복합레진을 광조사하지 않고 Biscover를 적용한 군. 각 군의 시편은 실온의 증류수에 48시간 동안 보관한 후 $5^{\circ}C$$55^{\circ}C$에서 1,000회의 열 순환을 시행하고 2% methylene blue용액에 4시간 동안 침적시켰다. 20배율의 광학 입체현미경 하에서 각 군의 교합면측과 치은측 변연의 색소침투 정도를 관찰하여 미세누출 점수를 얻은후, 각군 간의 유의성을 검정하여 다음과 같은 결과를 얻었다. 1. 2군은 1군보다 교합면측과 치은측 변연 모두에서 높은 미세누출을 보였으나 통계학적으로 유의한 차이는 없었다 (p > 0.05). 2. 대조군은 교합면측 변연에서 1군과 2군보다 약간 높은 미세누출을 보였으며 , 치은측 변연에서 1군보다 약간 높게 그리고 2군과 비슷한 미세누출을 보였다 (p > 0.05). 3. 대조군과 2군은 교합면측 보다 치은측 변연에서 통계학적으로 높은 미세누출을 보였으며 (p < 0.05), 1군은 교합면측과 치은측의 변연 미세누출 간에 통계학적인 차이를 나타내지 않았다 (p > 0.05). 본 연구를 종합하면, Biscover는 중합된 복합레진 표면에 적용할 경우 치은측 변연의 미세누출을 감소시키는데 효과적이었다.

상아질 접착제 사용 여부에 따른 근관 밀폐효과의 비교 (COMPARISON OF APICAL SEAL WITH OR WITHOUT THE USE OF DENTIN ADHESIVE SYSTEM)

  • 이민조;박상혁;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제30권1호
    • /
    • pp.7-15
    • /
    • 2005
  • 이 연구의 목적은 상아질 접착제의 사용 여부에 따른 근관 밀폐효과를 비교 평가하기 위해 40개의 단근치를 근관 성형 후 20개씩 두군으로 나누었다. 1군은 근관 충전시에 상아질 접착제를 사용하지 않았으며 2군은 상아질 접착제를 사용하였다. 근첨에서 1.5 mm (Level 1), 2.0 mm (Level 2), 2.5 mm (Level 3) 떨어진 부위의 평균 누출률을 측정하였다. 1. 두군의 평균 누출률은 치경부로 향하면서 감소하였다. 2. Level 1에서 1군과 2군의 평균 누출률은 차이가 없었다 (p > 0.05) .3. Level 2와 3에서 2군의 평균 누출률은 1군보다 낮았으며, 통계학적으로 유의차를 나타내었다 (p < 0.05) .연구결과 상아질 접착제를 사용하여 근관 충전하는 경우 치근단 누출을 감소시킬 수 있을 것으로 판단된다.

소형차 전용터널 내 수소연료전지차 화재시 집중배기방식의 제연성능에 관한 연구 (A study on the smoke control performance of the damper exhaust system at FCEV fire in tunnel for small vehicles)

  • 홍서희;백두산
    • 한국터널지하공간학회 논문집
    • /
    • 제24권6호
    • /
    • pp.745-756
    • /
    • 2022
  • 도로터널은 입구와 출구를 제외한 모든 면이 막혀있는 반밀폐공간으로 화재가 발생할 경우 화재 연기는 화재로 인한 열부력과 터널 내 상시 존재하는 기류에 의해 종방향으로 확산하게 된다. 이러한 문제를 해결하기 위해 도로터널에는 연기의 이동방향을 제어하거나 화재지점에서 직접 배연함으로써 안전한 대피환경을 확보하고 신속한 구조 및 소화 활동을 위해 제연 설비를 설치하고 있다. 도심지에서는 인구 증가에 따른 교통량 증가로 인해 도심지 도로의 서비스 수준이 저하되어 극심한 정체현상이 빗어지고 있으며, 이에 대한 해결방안으로 도심지에 지하도로의 건설이 증가하고 있는 추세이다. 수소연료전지차(FCEV)의 TPRD를 통한 수소 누출 시 화재가 발생하는 경우, 화재강도는 누출량에 의존하며, 최대 화재강도는 TPRD의 오리피스 직경에 따라 달라진다. 본 연구에서는 TPRD의 오리피스 직경 1.8 mm를 고려하여 최대 화재강도가 15 MW일 때, 소형차전용터널 내 차도 풍속과 대배기구의 개방 간격에 따른 화재연기의 확산거리에 대해 분석하였다. 그 결과, 터널 내 차도 풍속이 1.25 m/s 이하인 경우 터널 내 기류제어가 가능하였으며, 댐퍼 간격이 50 m, 100 m 인 경우 화재로부터 200 m 범위 이내에서 제연이 가능한 것으로 분석됐다.

시나리오 기반의 스마트폰 취약점에 대한 보안방안 연구 (Study on security method for scenario-based smartphone vulnerability)

  • 이재호;손민우;이상준
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제8권6호
    • /
    • pp.835-844
    • /
    • 2018
  • 최근 전 세계적으로 스마트폰(smartphone) 이용자 수가 늘어나면서 스마트폰으로 전자결제, 인터넷 사용, 금융결제 등 다양한 서비스를 사용하고 있으며, 이 외에도 스마트폰을 이용한 가전기기 제어, 자동차 제어 등을 위한 연구가 진행되고 있다. 이와 같이 스마트폰을 통해 이용자들이 좀 더 편리한 생활을 누릴 수 있게 되었으나 스마트폰 해킹을 통해 스마트폰 내 문자와 통화내용을 도청, 스파이 앱을 통한 위치추적, 스마트폰을 이용한 DDoS 공격, 악성 앱을 통해 소액결제 이용 시 특정 전화번호로 메시지가 수신되는 경우 해당 문자메시지를 원격지 서버로 전송하여 개인정보 등 유출 사례 등과 같은 위험이 역시 증가하고 있다. 따라서 본 논문에서는 우리가 실생활에서 사용하는 스마트폰을 통해 스마트폰 내·외부 환경적·물리적·콘텐츠(앱) 등으로 인해 발생되는 스마트폰의 위험요소를 정의하고 각 위험요소에 대한 보안방안 및 대응기법을 정의하여 스마트폰의 각 위험별 가장 효과적인 대응기법 및 CC평가와 같은 스마트폰 보안솔루션 평가 시 취약점 점검방법을 제시하고자 한다.

Low Actuation Voltage Capacitive Shunt RF-MEMS Switch Using a Corrugated Bridge with HRS MEMS Package

  • Song Yo-Tak;Lee Hai-Young;Esashi Masayoshi
    • Journal of electromagnetic engineering and science
    • /
    • 제6권2호
    • /
    • pp.135-145
    • /
    • 2006
  • This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

Application of Cathodic Protection on Metallic Structure in Extremely Acidic Fluids

  • Chang, H.Y.;Yoo, Y.R.;Jin, T.E.;Kim, Y.S.
    • Corrosion Science and Technology
    • /
    • 제4권4호
    • /
    • pp.140-146
    • /
    • 2005
  • Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.

라스와 모르타르를 이용한 데크의 휨거동에 관한 실험적 연구 (An Experimental Study on the Flexural Behavior of Deck Plates with Metal Lath and Mortar)

  • 김성배;김성진;서동민;김상섭
    • 콘크리트학회논문집
    • /
    • 제20권1호
    • /
    • pp.117-125
    • /
    • 2008
  • 국내 건설 산업 분야에서는 건설 전문인력의 부족과 건설비용의 상승으로 데크플레이트의 사용이 증가하고 있다. 그러나 최근 지하 주차장과 같은 지하구조물에서 얇은 아연도금 강판으로 제작된 데크플레이트를 사용할 경우 사용연한에 따른 녹발생, 누수에 대한 유지보수비 증가 등 여러 가지 문제점이 지적되고 있다. 이러한 문제점을 해결하기 위하여 아연도금강판 대신 라스와 모르타르를 사용한 데크플레이트를 개발하였다. 본 연구에서는 새로 개발된 데크플레이트에 대하여 시공하중과 사용하중을 적용할 경우의 휨 성능을 평가하였다. 주요 변수로는 트러스의 형태, 상하 주근의 직경, 슬래브의 두께 등이다.

이산화탄소로 산성화된 해수에 노출된 돌돔(Oplegnathus fasciatus) 혈구세포에 대한 유전독성(DNA 손상) (Genotoxicity (DNA damage) on Blood Cells of Parrot Fish (Oplegnathus fasciatus) Exposed to Acidified Seawater Making of CO2)

  • 최태섭;이지혜;성찬경;이정석;박영규;강성길
    • 한국환경과학회지
    • /
    • 제23권3호
    • /
    • pp.483-492
    • /
    • 2014
  • DNA damage such as genotoxicity was identified with comet assay, which blood cell of a marine parrot fish (Oplegnathus fasciatus) was exposed to an acidified seawater, lowered pH gradient making of $CO_2$ gas. The gradient of pH were 8.22, 8.03, 7.81, 7.55 with control as HBSS solution with pH 7.4. DNA tail moment of fish blood cell was $0.548{\pm}0.071$ exposed seawater of pH 8.22 condition, on the other hand, DNA tail moment $1.601{\pm}0.197$ exposed acidified seawater of pH 7.55 lowest condition. The approximate difference with level of DNA damage was 2.9 times between highest and lowest of pH. DNA damage with decreasing pH was significantly increased with DNA tail moment on blood cell of marine fish (ANOVA, p < 0.001). Ocean acidification, especially inducing the leakage of sequestered $CO_2$ in geological structure is a consequence from the burning of fossil fuels, and long term effects on marine habitats and organisms are not fully investigated. The physiological effects on adult fish species are even less known. This result shown that the potential of dissolved $CO_2$ in seawater was revealed to induce the toxic effect on genotoxicity such as DNA breakage.

펄스 레이저 증착법으로 제작된 다강체 $0.7BiFeO_3-0.3BaTiO_3$ 박막의 특성 연구 (Preparation and Characterization of Multiferroic $0.7BiFeO_3-0.3BaTiO_3$ Thin Films by Pulsed Laser Deposition)

  • 김경만;;;조영걸;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.88-88
    • /
    • 2009
  • $BiFeO_3$(BFO), when forming a solid solution with $BaTiO_3$(BTO), shows structural transformations over the entire compositional range, which not only gives a way to increase structural stability and electrical resistivity but also applies a means to have better ferromagnetic ordering. In this respect, we have prepared and studied 0.7BFO-0.3BTO thin films on $Pt(111)/TiO_2/SiO_2/Si$ substrates by pulsed laser deposition. Various deposition parameters, such as deposition temperature and oxygen pressure, have been optimized to get better quality films. Based on the X-ray diffraction results, thin films were successfully deposited at the temperature of $600^{\circ}C$ and an oxygen partial pressure of 10mTorr. The dielectric, ferroelectric, and magnetic properties have then been characterized. It was found that the films deposited under lower oxygen pressure corresponded to lower leakage current. Magnetism measurement showed an induced ferromagnetism. The microstructures associated with. the magnetic and dielectric properties of this mixed-perovskite solid solutions were observed by transmission electron. microscopy, which revealed the existence of complicated ferroelectric domains, suggested that the weak spontaneous magnetization was closely associated with the decrease in the extent of rhombohedral distortion by a partial substitution of $BaTiO_3$ for $BiFeO_3$.

  • PDF