• Journal of the Korean Applied Science and Technology
• /
• v.18 no.2
• /
• pp.118-126
• /
• 2001

Micelle formation and adsorption at the $Ti0_{2}$ interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous $Ti0_{2}$ dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the $I_{1}/I_{3}$ ratio, as the copolymer concentration increase; $I_{1}$ and $I_{3}$ are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of $TiO_{2}$ particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.79-85
• /
• 2002

The cutaneous tolerability of detergent formulations can be improved by means of suitable additives. They complex the surfactant molecules lowering the concentration of their free monomeric species. Proteins derivatives used as additives for detergency are usually prepared by partial hydrolysis of plant reserve proteins. The main purpose of the hydrolytic cleavage is to make them water soluble and suitable for liquid products. Water solubility and stability are obtained by means of complexation with surfactants which also increase their actual hydrophobicity, an important parameter affecting cosmetic properties of proteins. Transepidermal water loss (TEWL) and electric capacitance (EC) have been adopted as investigation technigues to evaluate the skin integrity/damage in vitro tests, The performance of native wheat protein / surfactant complexes has been compared with traditional protein hydrolysates as detergent additives. The results show a noticeable reduction of skin irritation in surfactant formulations with addition of native wheat protein.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.912-918
• /
• 2009

An optically active diacid containing the L-histidine moiety was prepared by reacting pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydride) 1 with L-histidine 2 in acetic acid, and was polymerized with several aromatic diamines 5a-g to obtain a new series of optically active poly(amide-imide)s (PAIs) using two different methods, such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$)/pyridine (Py) and direct polycondensation in a tosyl chloride (TsCl)/pyridine (Py)/N,N-dimethylformamide (DMF) system as a condensation agent. The resulting new polymers 6a-g with inherent viscosity was obtained in good yield. The polymers were readily soluble in polar organic solvents, such as N,N-dimethyacetamide (DMAc), N,N-dimethyformamide (DMF), and dimethyl sulfoxide (DMSO). The obtained polymers were characterized by FTIR, specific rotation, elemental analysis as well as $^1$H-NMR spectroscopy and gel permeation chromatography (GPC). The thermal stability of the resulting PAIs was evaluated with thermogravimetric analysis techniques under a nitrogen atmosphere.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.318-323
• /
• 1997

ο-(2-Vinyloxyethoxy)benzylidenemalononitrile (3a) and methyl ο-(2-vinyloxyethoxy)-benzylidenecyanoacetate (3b), m-(2-vinyloxyethoxy)benzylidenemalononitrile (4a), and methyl m-(2-vinyloxyethoxy)benzylidenecyanoacetate (4b) were prepared by the condensation of ο-(2-vinyloxyethoxy)benzaldehyde (1) and m-(2-vinyloxyethoxy)benzaldehyde (2) with malononitrile or methyl cyanoacetate, respectively. Bifunctional vinyl ether monomers 3a and 3b polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃, while meta-isomers 4a and 4b gave lower yields of polymers under the same conditions. The polymers 5-6 obtained from the monomers 3-4 were insoluble in common solvents due to cross-linking. Under the same polymerization conditions ethyl vinyl ether polymerized well with model compounds ο-methoxybenzylidenemalononitrile 7a, methyl ο-methoxybenzylidenecyanoacetate 7b, m-methoxybenzylidenemalononitrile 8a, and methyl m-methoxybenzylidenecyanoacetate 8b, respectively, to give 1:1 alternating copolymers 9-10 in high yields. Cross-linked polymers 5-6 showed a thermal stability up to 300 ℃, and showed a double phase degradation pattern in their TGA thermograms. Polymers 5-6 showed broad endothermic bands around 75-110 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 9-10, except copolymer 9b were soluble in common organic solvents. The inherent viscosities of polymer 9-10 were in the range of 0.35-0.62 dL/g. Polymer films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 118-165 ℃.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.6
• /
• pp.561-567
• /
• 2021

Curcumin is not soluble in water. Therefore, curcumin emulsion that can dissolve well in water were prepared using multi-emulsification technology, and the antioxidant activities and physical properties of emulsion were measured. Although curcumin was not dissolved in water, it was confirmed to be well dispersed in water when prepared in an aqueous dispersion curcumin emulsion. After dissolving curcumin using water and ethanol as solvents, respectively, the DPPH and ABTS radical scavenging abilities of the filtrate and the curcumin emulsion were measured. Because it was not dissolved in water, activities were not shown. However, when curcumin was dissolved in ethanol, the activities increased as the concentration of curcumin increased. On the other hand, when the curcumin emulsion was dissolved in water, it was found to have abilities. The curcumin emulsion was nano-homogenized and the size and distribution of the emulsified spheres were measured. It was confirmed to be nano-sized as it appeared as 9.083 nm/100%. In the results of the DPPH radical and ABTS radical scavenging abilities of curcumin nano-emulsion, it was confirmed that there was no change in the antioxidant abilities. In conclusion, water-dispersible curcumin prepared using multi-emulsification technology, and it was confirmed to exhibit antioxidant activity and emulsion stability.

• Nutrition Research and Practice
• /
• v.17 no.4
• /
• pp.597-615
• /
• 2023

Healthy aging can be defined as an extended lifespan and health span. Nutrition has been regarded as an important factor in healthy aging, because nutrients, bioactive food components, and diets have demonstrated beneficial effects on aging hallmarks such as oxidative stress, mitochondrial function, apoptosis and autophagy, genomic stability, and immune function. Nutrition also plays a role in epigenetic regulation of gene expression, and DNA methylation is the most extensively investigated epigenetic phenomenon in aging. Interestingly, age-associated DNA methylation can be modulated by one-carbon metabolism or inhibition of DNA methyltransferases. One-carbon metabolism ultimately controls the balance between the universal methyl donor S-adenosylmethionine and the methyltransferase inhibitor S-adenosylhomocysteine. Water-soluble B-vitamins such as folate, vitamin B6, and vitamin B12 serve as coenzymes for multiple steps in one-carbon metabolism, whereas methionine, choline, betaine, and serine act as methyl donors. Thus, these one-carbon nutrients can modify age-associated DNA methylation and subsequently alter the age-associated physiologic and pathologic processes. We cannot elude aging per se but we may at least change age-associated DNA methylation, which could mitigate age-associated diseases and disorders.

• Membrane and Water Treatment
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2024

Biological nutrient removal is gaining increasing attention in wastewater treatment plants; however, it is adversely affected by low temperatures. This study examined temperature effects on nutrient removal and morphological stability of the granular and denitrifying phosphorus accumulating organisms (PAO and DPAO, respectively) using sequencing batch reactors (SBRs) at 5, 10, and 20 ℃. Lab-scale SBRs were continuously operated using anaerobic-anoxic and anaerobic-oxic cycles to develop the PAO and DPAO granules for 230 d. Sludge granulation in the two SBRs was observed after approximately 200 d. The average removal efficiency of soluble chemical oxygen demand (SCOD) and PO₄^3--P remained >90% throughout, even when the temperature dropped to 5 ℃. The average removal efficiency of NO₃^--N remained >80% consistently in DPAO SBR. However, nitrification drastically decreased at 10 ℃. Hence, the removal efficiency of NH₄⁺-N was decreased from 99.1% to 54.5% in PAO SBR. Owing to the increased oxygen penetration depth at low temperatures, the influence on nitrification rates was limited. The granule in DPAO and PAO SBR was observed to be unstable and disintegrated at 10 ℃. In conclusion, morphological characteristics showed that changed conversion rates at low temperatures in aerobic granular sludge altered both nutrient removal efficiencies and granule formation.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.220-228
• /
• 2009

This study was conducted to determine the preblending effect of curing agents on the characteristics of mechanically deboned chicken meat (MDCM), including the pH, water-holding capacity (WHC), and stability under refrigeration conditions. MDCM was preblended with different curing agents [NaCl, 0.75 or 1.5%; sodium tripolyphosphate (STPP), 0.25 or 0.5%; ascorbic acid, 250 or 500 ppm; sodium nitrite, 75 or 150 ppm] and were stored at $4^{\circ}C$ overnight. The preblending of NaCl was found to have improved the WHC and emulsion stability; STPP was found to have improved the pH, WHC, and emulsion stability; and ascorbic acid or sodium nitrite did not affect the pH, WHC, and emulsion stability. The addition of ascorbic acid or sodium nitrite, however, decreased the 2-thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values of the preblended MDCM through the antioxidizing properties. The mixing effects of different curing agents on MDCM were also evaluated with nine different conditions. Among the treatments, the mixture of NaCl and STPP improved the WHC and emulsion stability due to the increased solubility of salt-soluble protein in the preblended MDCM. The mixture of NaCl, STPP, and ascorbic acid increased the pH, WHC, and emulsion stability, but the mixture of NaCl, STPP, ascorbic acid, and sodium nitrite improved the WHC, emulsion stability, and redness of the surface color with improved storage stability due to the decreased VBN and TBA values. As a result, the mixture of 1.5% NaCl, 0.5% STPP, 500 ppm ascorbic acid, and 75 ppm sodium nitrite showed the best properties as curing agents for MDCM preblending.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.12
• /
• pp.1656-1664
• /
• 2009

Bioaugmentation of bioreactors focuses on the removal of numerous organics, with little attention typically paid to the maintenance of high and stable nitrite accumulation in partial nitrification. In this study, a bioaugmented membrane bioreactor (MBR) inoculated with enriched ammonia-oxidizing bacteria (AOB) was developed, and the effects of dissolved oxygen (DO) and temperature on the stability of partial nitrification and microbial community structure, in particular on the nitrifying community, were evaluated. The results showed that DO and temperature played the most important roles in the stability of partial nitrification in the bioaugmented MBR. The optimal operation conditions were found at 2-3 mgDO/l and $30^{\circ}C$, achieving 95% ammonia oxidization efficiency and nitrite ratio ($NO_2^-/{NO_x}^-$) of 0.95. High DO (5-6 mg/l) and low temperature ($20^{\circ}C$) had negative impacts on nitrite accumulation, leading to nitrite ratio drop to 0.6. However, the nitrite ratio achieved in the bioaugmented MBR was higher than that in most previous literatures. Denaturing gradient gel electrophoresis (DGGE) and fluorescence in situ hybridization (FISH) were used to provide an insight into the microbial community. It showed that Nitrosomonas-like species as the only detected AOB remained predominant in the bioaugmented MBR all the time, and coexisted with numerous heterotrophic bacteria. The heterotrophic bacteria responsible for mineralizing soluble microbial products (SMP) produced by nitrifiers belonged to the Cytophaga-Flavobacterium-Bacteroides (CFB) group, and $\alpha$-, $\beta$-, and $\gamma$- Proteobacteria. The fraction of AOB ranging from 77% to 54% was much higher than that of nitrite-oxidizing bacteria (0.4-0.9%), which might be the primary cause for the high and stable nitrite accumulation in the bioaugmented MBR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1429-1436
• /
• 2006

Fermentation characteristics, nutrient retention and aerobic stability of barley silages prepared using 6 commercial inoculants were evaluated using 126 mini-silos (3-L) in a completely randomized design. Whole barley forage was chopped, wilted to 39% DM and treated with water (control, S) or one of six inoculants: A (containing Lactobacillus plantarum); B (L. plantarum and Enterococcus faecium); C (L. plantarum and Pediococcus cerevisiae); D (L. plantarum, Pediococcus pentosaceus and Propionibacterium freudenreichii, plus hydrolytic enzymes); E (Lactobacillus buchneri plus hydrolytic enzymes); F (L. buchneri and P. pentosaceus plus hydrolytic enzymes). Samples of treated forage were collected for analysis at the time of ensiling, and then 18 silos of each treatment were filled, capped and weighed. Triplicate silos were weighed and opened after 1, 3, 5, 7, 33, and 61 d. On d 61, $400{\pm}5g$ of material from each silo was placed in 1-L styrofoam containers, covered with cheesecloth and held at room temperature. Silage temperature was recorded hourly for 14 d via implanted thermocouple probes. Chemical composition of the forage at ensiling was consistent with previously reported values. At d 61, pH was lowest (p<0.01) in silage S. Ammonia-N was lower (p<0.05) in silage A than in silages S, B, E, or F. Compared to pre-ensiling values, water soluble carbohydrate concentrations were elevated in silages S, A, B, C and D, and decreased in E and F. Lactic acid concentrations were similar (p>0.10) across treatments. Acetic acid levels were highest (p<0.01) in silage E and lowest (p<0.01) in silage D. Recovery of DM was lower (p<0.01) in silage F than in silages S, A, B, C, or D. On d 61, yeasts were most numerous (p<0.01) in silage D, which was the only silage in which temperature rose more than $2^{\circ}C$ above ambient during aerobic exposure. Silage D also had the highest (p<0.01) pH and ADIN content after aerobic exposure. Lactic acid and WSC content of silage D decreased dramatically during the 14-d aerobic exposure period. Yeast counts (at d 14 of exposure) were lowest (p<0.01) in silages E and F. In general, the commercial inoculants did not appear to enhance the fermentation of barley silage to any appreciable extent in laboratory silos.