• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.214-214
• /
• 2003

고체 고분자 전해질에 대한 연구는 1979년 wright와 Armand에 처음 시작된 이래로 지난 20여년간 연구가 계속적으로 지속되고 있다. 전지의 적용되기 위해 전해질이 갖추어야 할 조건중에 이온전도도가 상온에서 10-4 S/cm 이상의 전도도를 나타내야 하지만 지금까지 연구되고 있는 여러 고체 고분자 전해질은 이런 조건을 만족시키지 못하고 있는 실정이다. 본 연구에서는 이런 상온에서의 이온 전도성을 향상시키기 위해 여러 종류의 실리카와 세라믹 계열의 첨가제를 첨가하여 이온전도성의 향상을 꾀하고자 하였다. 본 연구에서는 고체 고분자 전해질의 host polymer로써 분자량 400,000 의 Polyethylene oxide를 사용하였으며 Lithuim salt로는 Lithium (bisperfluroethylsulfonyl)imide(3M)를 기본적으로 사용하였다. 여기에 가소제의 역활로써 (3-cyanopropyl)methylsiloxane cyclics를 첨가하였고 표면그룹이 CH3와 OH기로 이루어진 기능성 나노 실리카를(<11nm)이용하여 함량별 전기 화학적 특성 및 기본 물성을 측정하였다. 기본적으로 이 네 가지 물질을 유기용매 Acetonitril에 잘 용해하여 Solid Casting방법으로 80-100 마이크로의 복합고분자 전해질을 제조하였다. Homogeneous하고 uniform한 필름 제조하기 위해 9$0^{\circ}C$에서 열처리를 24h 동안 실시하였다. 제조되어진 복합고분자전해질은 XRD를 통하여 결정성을 조사하였고 DSC를 이용하여 유리 전이온도 및 결정화도를 조사하였다. 복합고체고분자의 전기화학적 성질을 평가하기 위해 blocking electrode를 제작하여 임피던스 스펙트로 스코피를 이용하여 이온전도성을 측정하였다. 또한 복합 고분자 전해질의 온도의존성에 대해서도 조사하였다. 또한 실제 전지의 작동구간에서의 전해질의 안정성을 확인하기 위해 LSV를 측정하였고. Li metal을 사용하여 non-blocking electrode를 제작하여 복합고분자 전해질과의 계면저항을 측정하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.414-420
• /
• 2011

평균전류밀도 0~2000 $A/m^2$ 의 운전범위에 대한 음극 지지형 고체산화물 연료전지의 단위셀에 대한 열응력해석을 수행하였다. 평균전류밀도가 2000 $A/m^2$ 운전에서, 단위전지 열유동에 대한 수치해석적 방법으로 얻어진 온도분포를 토대로 구조해석을 수행하였다. 온도 편차가 매우 미미한 상태 에서 이러한 유체-구조 연성 해석 방법을 통하여 완전 결합된 조건에서 최대등가응력이 전해질은 262.58MPa, 캐소드는 28.55MPa, 애노드는 15.1MPa로 계산되어 전해질에서 가장 높은 응력이 발생함 을 알 수 있었다. 또한, 마찰접합조건인 경우 마찰계수가 증가함에 따라 응력이 증가함을 알 수 있었으며, 이는 셀 내부 물질간의 결합력에 의한 응력이 지배적임을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.373-373
• /
• 2009

Relative humidity, membrane conductivity and water activity are critical parameters of polymer electrolyte membrane fuel cells (PEMFC) for high performance and reliability. These parameters are closely related with temperature. Moreover, the ideal values of these parameters are not always identical along the channels. Therefore, the cooling channel design and its operating condition should be well optimized along the all location of the channels. In the present study, we have performed a numerical investigation on the effects of cooling channels on performance of a PEMFC. Three-dimensional Navier-Stokes equations are solved with the energy equation including heat generated by the electrochemical reactions in the fuel cell. The present numerical model includes the gas diffusion layers (GDL) and serpentine channels for both anode and cathode gas flows, as well as cooling channels. To accurately predict the water transport across the membrane, the distribution of water content in the membrane is calculated by solving a nonlinear differential equation with a nonlinear coefficient, i.e., the water diffusivity which is a function of water content as well as temperature. Main emphasis is placed on the heat transfer between the solid bipolar plate and coolant flow. The present results show that local current density is affected by cooling channels due to the change of the oxygen concentration and the membrane conductivity as well as the water content. It is also found that the relative humidity is influenced by the generated water and the gas temperature and thus it affects the distribution of fuel concentration and the conductivity of the membrane, ultimately fuel cell performance. Unit-cell experiments are also carried out to validate the numerical models. The performance curves between the models and experiments show reasonable results.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.690-695
• /
• 2007

Scandia stabilized zirconia (ScSZ) is adapted for electrolyte material of solid oxide fuel cell (SOFC) because of its high ionic conductivity and chemical stability. ScMnSZ1 powder having a composition of $((ZrO_2)_{0.89}(Sc_2O_3)_{0.1}(MnO_2)_{0.01})$ is synthesized by ultrasonic spray pyrolysis (USP) method. Porous ScMnSZ1 powder is obtained by using a pore forming agent. Microstructure and morphology, particle size distribution of porous powder synthesized with 3wt% pore forming agent are investigated. Sintered ScMnSZ1 sample with ground fine powder are also investigated their microstructure and electrical conductivity. The electrical conductivity of sintered ScMnSZ1 samples with ground fine powder was 0.082 S/cm, 0.127 S/cm and 0.249 S/cm at $750^{\circ}C$, $800^{\circ}C$ and $900^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.197-204
• /
• 2019

An electrochemical oxygen permeating membrane (OPM) is fabricated using Zr_0.895Sc_0.095Ce_0.005Gd_0.005O_2-δ (ScCeGdZ) as the solid electrolyte and aLa_0.7Sr_0.3MnO₃-bScCeGdZ composite (LZab, electrode) as the electrode. The crystal phase of the electrode and the microstructure of the membrane is investigated with X-ray diffraction and scanning electron microscopy. The electrochemical resistance of the membrane is examined using 2-p ac impedance spectroscopy, and LZ55 shows the lowest electrode resistance among LZ82, LZ55 and LZ37. The oxygen permeation is studied with an oxygen permeation cell with a zirconia oxygen sensor. The oxygen flux of the OPM with LZ55 is nearly consistent with the theoretical value calculated from Faraday's Law below a critical current. However, it becomes saturated above the critical current due to the limit of the oxygen ionic conduction of the OPM. The OPM with LZ55 has a very high oxygen permeation flux of ~ 3.5 × 10^-6 mol/㎠s in I = 1.4 A/㎠.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.183-196
• /
• 2017

The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.

• 대한화학회지
• /
• 제24권4호
• /
• pp.295-301
• /
• 1980

고체전해질 $RbAg_4I_5$의 단결정을 키워서 온도에 따른 전기전도율의 변화를 퍼텐티오메트릭 4-전극방법으로 측정하고 $Ag/RbAg_4I_5$, 계면에 대한 전기화학적 성질을 순환전압전류법으로 조사하였다. 25$^{\circ}C$에서 단결정의 비전기전도율은 $0.284\pm0.003 ohm^{-1}cm^{-1}이었고 \;Ag^+$이온의 이동에 대하여 계산된 활성화에너지는 1.70kcal/mol로서 다결정 시료에 대한 값들과 거의 일치하였다. 순환전압전류법 실험결과 은 기준전극에 대한 전위 0볼트 이하에서는 은 전극에서 $Ag^+$ 이온의 가역적환원이 일어났고 +0.67볼트 이상의 전위에서 요오드화 이온이 산화되어 요오드가 유리되었다. 은의 산화 전위에서 은 전극은 작은 양극전류만을 나타내었으나 환원전위에서 은 전극의 표면에 환원 석출된 은은 다시 양극 전위로 돌아갈 때 아주 큰 산화전류를 나타내었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.229-234
• /
• 2004

수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.755-759
• /
• 2008

New cathode materials $LaNi_{1-x}{Cu_x}{O_3}$ (typically $LaNi_{0.8}Cu_{0.2}O_3$) were synthesized using a co-precipitation method. The structure and morphology of the powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The composite material [$Ce_{0.8}Sm_{0.2}O_{2-\ddot{a}}$(SDC) and carbonate (${Na_2}{CO_3},{Li_2}{CO_3}$)], NiO and $LaNi_{1-x}{Cu_x}{O_3}$ were used as the electrolyte, anode and cathode, respectively. The electrochemical performance of La-Ni-Cu-O perovskite oxide at low temperatures ($400{\sim}550^{\circ}C$) was studied. The results showed that $LaNi_{0.8}Cu_{0.2}O_3$ precursor powder prepared through a co-precipitation method and calcined at $860^{\circ}C$ for 2 h formed uniform grains with diameters in the range of $400{\sim}500\;nm$. The maximum power density and the short circuit current density of the single cell unit at $550^{\circ}C$ were found to be $390\;mW/cm^2$ and $968\;mA/cm^2$, respectively.