• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.717-720
• /
• 2007

The 3 ton/day-scale pilot plant consists of compressor, feed channel, fixed bed type gasification & melting furnace, quench scrubber, demister, flare stack and gas engine. Syngas composition of gasification using the 35.50(waste I), 4.34%(wasteII) moisture-containing solid waste showed waste I CO 25-35%, 20-40% hydrogen, waste II 25-35%, 20-30% hydrogen. Gasification melting furnace was operated $1,500{\sim}1,600^{\cdot}C$. Gas engine was generated $35{\sim}40$ kW as waste gasification syngas.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.193-194
• /
• 2017

• Journal of Environmental Health Sciences
• /
• v.29 no.4
• /
• pp.35-41
• /
• 2003

The objective of this study was investigate the generation rates, composition, proportion and calorific values each of material in the municipal solid wastes as well as the effect of incineration residual leachate on the environment in Yangsan sanitary landfill site. The results were as follows ; The annual average generation rate of municipal solid wastes in Yang-san is approximately 2.0 kg/cㆍd. The weight percent of combustible matters is on average 78∼87% and the lower heating values of municipal solid wastes is measured to be more than 2,151 kcal/kg after removing the briquette component. The food waste was major source of solid wastes in Yang-san city as 35% and its variation by seasons was negligible. Combustible part was larger than incombustible part of the domestic solid wastes in spring and summer. It is recommended that municipal solid wastes be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.267-268
• /
• 2018

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.643-650
• /
• 2003

We analyzed the amount of environmental loads, and the amount of energy consumption through life cycle assessment from a discharge stage to the ultimate disposal to municipal solid waste in Seoul. We carried out inventory analysis of the amount of environmental loads that made the object range collection, intermediate treatment, and the final treatment, and took into consideration each stage exceptions CO$_2$ and NOx , the amount of SOx discharge, and energy consumption. We applied the data of an object model, and acquisition processed the scale of an object model suitably and applied to it to difficult data using the data of the Yokohama City incineration plant in Japan. The amount of environmental loads per Iton of municipal waste were analyzed CO$_2$ 0.4C-ton, SOx 0.4kg and NOx 0.8kg. Moreover, the amount of energy consumption which is 2.4Gcal was computed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.72-75
• /
• 2001

This paper presents a sophisticated mixed-integer linear programming model that may help regional decision-maker to develop long term plan of solid waste management The model revises Ni-Bin Chang(1996)'s integrated waste management models to fit Korean solid waste management system We apply this model to evaluate impact of facility sharing and coordinated operation among three self-governing districts in Seoul city Our study results indicate that facility sharing and coordinated operation among districts eliminate unnecessary landfilling and facility expansion.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.628-632
• /
• 2001

The removal rate of Cl from municipal solid waste incineration(MSWI) ash(bottom ash and fly ash) by washing was investigated. The Cl contents in the bottom ash and fly ash were 2.6-3.0% and 25-30% respectively, and KCl, NaCl, CaCIOH and friedel's salt were main components. From the results on the effects of washing time and temperature, the Cl contents in the bottom ash and fly ash were decreased up to 0.3% and 2.0% respectively by using of water as a solvent within 30 min at 2$0^{\circ}C$, 300 rpm of agitation speed and 10 of liquid/solid ratio. It is expected that the removal of Cl from the incineration ash by washing could make use of the ash for a cement raw material and so on.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.30-35
• /
• 2007

Waste policies with waste metering system and recycling in 1995 have contributed to the reduction of solid waste generation. Now rural areas as well as urban areas produce less amount of solid wastes in terms of per capita. However most policies in relation to waste issue have been concentrated in urban areas. Large portion of agricultural waste in rural region are being illegally treated such as open incineration or burned out on the road. In this study, we assessed the atmospheric air quality and health risk by illegal open incineration in rural region. In case of benzene level, worst concentration during illegal open incineration was 0.23 ppm and cancer risk by exposure was estimated to $2.29{\times}10^{-3}$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.E
• /
• pp.13-21
• /
• 1995

This Pilot study identifies potential dioxin and furan sources and medical plastic wastes produced from hospital solid waste streams. In this study, air emissions of dioxins and furans from sources in the U.S., which were estimated by the U.S. Environmental Protection Agency (EPA), were summarized. Potential loading routes of dioxins and furans to the U.S.-Canada Great Lakes region have also been identified in trcent surveys. In addition, medical and hospital solid wastes produced in typical large city hospitals were characterized as important potential sources of dioxins and furans. Plastic contents in medical Plastics Characterization Survey (MMPCS), plastics composition data were obtained from a survey of five Massachusetts Hospitals and Medical Centers. By identifying plastic wastes as a percentage of total hospital wastes, we were able to use data from a preliminary study that analyzed the waste stream of 16 major New York City hospitals (NYCMWS) characterizing the plastic content of the wasters. This study determined the types of plastic wastes included in each medical waste stream (regulated medical waste or non regulated medical waste) and it discussed the potential for recyclibility of hospital plastic wastes. The combination of the NYCMWS and the MMPCS surveys provides for the first overview of the size of the recycling task of hospital plastic wastes and the potential of dioxin elimination if dioxin generating plastics were to be eliminated from hospital use.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.1 s.1
• /
• pp.91-102
• /
• 2001

This study aims to provide a program for the municipal solid waste collection and transportation management through data consolidation and field research of the materials about waste collection and transportation in a small city. The field research was conducted in the collection zone of the housing, apartment and business section within C city area. As a result, the main factor of collection and transportation plan required at the waste collection and transportation process and the central mean applying at the small city were calculated. The process that systemize the waste collection and transportation step and the expert system were constructed. In conclusion, the developed management system of the municipal solid waste collection and transportation can be wildly used by adding the data of other zone.