• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.115-120
• /
• 2015

$K_2CO_3$-based dry regenerable sorbents were prepared by spray-drying techniques to improve mass produced $K_2CO_3-Al_2O_3$ sorbents (KEP-CO2P, hereafter), and then tested for their $CO_2$ sorption capacity by a $2,000Nm^3/h$ (0.5 MWe) $CO_2$ capture pilot plant built for Unit 3 of the Hadong thermal power station in 2010. Each of the sample sorbents contained 35 wt.% $K_2CO_3$ as the active materials with various support materials such as $TiO_2$, MgO, Zeolite 13X, $Al_2O_3$, $SiO_2$ and hydrotalcite (HTC). Their physical properties and reactivity were tested to evaluate their applicability to a fluidized-bed or fast transport-bed $CO_2$ capture process. The $CO_2$ sorption capacity and percentage utilization of $K_2CO_3$-MgO based sorbent, Sorb-KM2, was $8.6g-CO_2/100g$-sorbents and 90%, respectively, along with good mechanical strength for fluidized-bed application. Sorbs-KM2 and KT were almost completely regenerated at $140^{\circ}C$. No degradation of Sorb-KM by $SO_2$ added as a pollutant in flue gas was observed during a cycle test.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.245-254
• /
• 2013

Korea government promote renewable energy as the core of their energy matrix to break the dependence and reduce greenhouse effects. This study analyzes the economic assessment of Solid Refuse Fuel project in urban area, considering the marginal external costs of air pollution in this area. Assessment index defined as costs (i.e., construction cost, operation cost) and benefit (margin, external cost) data which is located in Sudokwon landfill site. The result indicates that cost-benefit analysis of SRF is calculated as 1.0. In addition, SRF project is very sensitive about electric power selling price, operating cost and labor cost according to inflation rates. This study shows that the sustainability of SRF project is required the government financial support like investment funds as well as policy support. Variability analysis of SRF economic assessment due to renewable energy can be used for making policies in various fields such as waste and public energy field.

• Fashion & Textile Research Journal
• /
• v.24 no.5
• /
• pp.557-566
• /
• 2022

This study aims to investigate Jinju silk companies, production items, and silk industry supporting projects from 2019 to 2021 in order to discuss the current status of the silk industry. The following are this study's methods: First, a list of Jinju silk companies that have been operating for the past three years (2019-2021) was prepared to investigate the current status of the Jinju silk industry. Second, an investigation was conducted into the representative products produced in Jinju over the past three years; this investigation was conducted using direct interview. Third, an investigation was conducted on the projects that supported the Jinju silk industry over the past three years, and the list of members of the Gyeongnam Textile and Jinju Silk Industry Cooperative Association-a facility of Gyeongsangnam-do Province, the Jinju City Hall brochure (2019), and the SMINFO(SMall business status INFOrmation System) were utilized for this purpose. The following are the results: First, Jinju silk companies are classified into four categories, namely weaving, dyeing, twisting, and designing companies. According to data from 2021, 83% (34 of 41) of silk companies were weavers. Second, the demand for solid fabrics has increased over the past three years. The demand for patterned jacquard fabrics in producing Hanbok and Western-style clothing has decreased. Third, support for the Jinju silk industry could be classified into five categories: support for the operation of silk research institutions, support for the diversification of Jinju silk, support for the promotion of Jinju silk, support for the operation of silk manufacturers, and others.

• Journal of the Korean Society of School Health
• /
• v.17 no.2
• /
• pp.127-150
• /
• 2004

Objectives: The purpose of this study is to provide a basic structure for the establishment of the direction of school health programs, an overview of the historical changes of school health programs and their results, and a conceptual framework on school health programs. Methods: The data analysis has been done using a statistical almanac, relevant laws and regulations, operation handbook of the program, theses, reports, records of public hearings, and other reports as a technical research primarily based on evidence. The methodology of this research classifies the development and growth transition of school health programs during a historical period through the investigation of regulations, organization, manpower, and its program via its development process and to provide a basic tool to design a solid school health policy. Results: A The growth and development of school health programs The development of school health programs was classified into three different periods including the forthcoming period (1945~1967), the completion period (1967~1993), and the actualization period based on the establishment of legislation for School Health Law, other relevant legislation, and the contents of school health programs (1993~present). B. Policy direction of school health programs School health programs have reestablished their goals and range based on basic direction, and developed the W1it model of information structure for school health program management and its basic structure. Finally, the stepwise support system through the building of the school health support center is recommended. (1) The basic direction of school health programs has proposed 7 basic goals to reestablish the policy direction of health improvement based on total health. (2) The W1it model of information system and the school health information system for school health program management has been developed to utilize positive management. (3) School health policy through the study of the health laws and systems has been developed. The necessity of school health support center for the policy support, functional support and operation support has also been proposed. Conclusions: It is necessary to build a school health support center that consists of health professionals in charge of policy support, functional support, and program support of school health programs in order to realize and develop new policy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.1-15
• /
• 2010

This study analyzed the change of flowout and suspend solid in Andong and Imha basin according to the climate change to develop evaluation index about turbid water occurrence possibility and to support the countermeasures for turbid water management using GIS-based Soil and Water Assessment Tools (SWAT). MIROC3.2 hires model values of A1B climate change scenario that were supplied by Intergovernmental Panel on Climate Change (IPCC) were applied to future climage change data. Precipitation and temperature were corrected by applying the output value of 20th Century Climate Coupled Model (20C3M) based on past climate data during 1977 and 2006 and downscaled with Change Factor (CF) method. And future climate change scenarios were classified as three periods (2020s, 2050s, 2080s) and the change of flowout and suspended solid according to the climate change were estimated by coupling modeled value with SWAT model. Flowout and suspended solid of Andong and Imha basin in 2020s, 2050s, and 2080s were simulated as increasing compared with standard year (2006). Also, as the result of seasonal change, flowout and suspended solid of Andong and Imha basin in spring, autumn, and winter showed as increasing compared with standard year. And them of Andong and Imha basin in summer were analyzed as decreasing compared with standard year.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.716-721
• /
• 2004

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of speedy prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the ${CAFL}^{VM}$(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. In this paper, we design an algorithm that the cutting path of a laser beam which is controlled with constant speed. The laser beam is tangentially controlled in order to solve the inaccuracy of a 3D model surface. The designed algorithm for constant-speed path control and tangent-cutting control is implemented and experimented in the ${CAFL}^{VM}$ system.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.1
• /
• pp.23-29
• /
• 1999

An yttria-stabilized zirconia(YSZ) thin film on a porous NiO-YSZ substrate for an anode support type solid oxide fuel cell(SOFC) was prepared by an electrophoretic deposition(EPD). Deposition condition and film properties in order to obtain the homogeneous YSZ thin film from the EPD solution with different polarity were studied. In different case of alcohol solution, hydrogen gas was produced in aqueous solution from the electrolyte reaction under constant current above 0.138 mA /$\textrm{cm}^2$.Its reaction generated the bubble-formed defect in the deposited film and decreased weight of the film. The homogeneous YSZ thin film was formed in alcohol solution at a constant current, 0.035 mA /$\textrm{cm}^2$ for 10 s.

• Genomics & Informatics
• /
• v.15 no.4
• /
• pp.136-141
• /
• 2017

Accurate detection of genomic alterations, especially druggable hotspot mutations in tumors, has become an essential part of precision medicine. With targeted sequencing, we can obtain deeper coverage of reads and handle data more easily with a relatively lower cost and less time than whole-exome or whole-genome sequencing. Recently, we designed a customized gene panel for targeted sequencing of major solid cancers. In this study, we aimed to validate its performance. The cancer panel targets 95 cancer-related genes. In terms of the limit of detection, more than 86% of target mutations with a mutant allele frequency (MAF) <1% can be identified, and any mutation with >3% MAF can be detected. When we applied this system for the analysis of Acrometrix Oncology Hotspot Control DNA, which contains more than 500 COSMIC mutations across 53 genes, 99% of the expected mutations were robustly detected. We also confirmed the high reproducibility of the detection of mutations in multiple independent analyses. When we explored copy number alterations (CNAs), the expected CNAs were successfully detected, and this result was confirmed by target-specific genomic quantitative polymerase chain reaction. Taken together, these results support the reliability and accuracy of our cancer panel in detecting mutations. This panel could be useful for key mutation profiling research in solid tumors and clinical translation.

• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.526-532
• /
• 2010

The anode may inevitably undergo a number of reduction.oxidation (redox) cycles during solid oxide fuel cells (SOFCs) operation. The re-oxidation of Ni to NiO causes significant mechanical stress to be developed across the anode, which may destroy the integrity of the whole cell. In this study, the redox behavior of Ni-YSZ composite was examined at $800^{\circ}C$ using various characterization techniques.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.14-17
• /
• 2002

To increase the efficiency of a two-stage anaerobic wastewater digestion system, various polymers were added to the methanogenic reactor as supports. The addition of polyurethane addition (6%, w/v) to the methanogenic reactor facilitated the organic loading rate (2-day Hydraulic Retention Time), higher than that of the conventional methanogenic reactor (6-day HRT). During the operation of the polyurethane-added reactor, a significant decrease in the organic mass in the effluent (COD 5-6 kg/l) was achieved, compared to that of the conventional reactor (COD 15-20 kg/l). The methane gas production rate also improved about 3-fold in the polyurethane-added reactor. More biomass was found to accumulate in the polyurethane-liquid phase (volatile solid, 26-28kg) than in the free-liquid phase (volatile solid, 5- 7 kg/l) after 90 days of operation. A scaled-up experiment with a polyurethane-added 2.5-1 reactor confirmed the previous results, and no adverse effects such as plugging or channeling due to decreased efficiency was observed even after 4 months of operation.