• 전기의세계
• /
• 제29권8호
• /
• pp.519-523
• /
• 1980

The traditional mechanical manometer is improved to develop more convenient and precise manometer in continuous measurement of the gas pressure in medium-low vacuum range (1x10$^{-1}$ -10 Torr.) Glass (solid) is used as a detector material of the improved manometer. Using the strain gauge adhered to thin glass board, mechanical strain corresponding to variation of pressure in measurement system is converted into quantity of electricity, and the quantity of electricity is amplified. Experiments have also shown that the improved manometer have more advantages in reproducibility, measured sensibility, and responsible velocity than taditional one.

• 식물조직배양학회지
• /
• 제28권4호
• /
• pp.215-219
• /
• 2001

팔레높시스 대량생산시 PLB 증식에 미치는 배지와 배양환경에 대해 조사하였다. PLB 증식량은 MS배지에서 높았지만, 증식된 PLB상태는 NDM배지가 더욱 양호하였다 천연첨가 물인 CW 10% 또는 사과와 감자의 사용은 PLB 증식효율을 향상시키는 데 필수적이었다. 배지내 지지물에 따른 PLB 증신률은 gelrite가 첨가된 고체배지가 흰색과 분홍색계통 모두 액체탈지면 배지보다 증식이 양호하였다. PLB 증식시 적정 sucrose 농도는 10g/L이며 농도가 높아질수록 PLB가 유식물체로 재분화되었고 저농도 일수록 증식과 유식물체의 재분화가 모두 억제되었다. PLB증식을 위한 적정 PPF와 온도는 각각 14.3 $\mu$mol.s$^{-1}$m$^{-2}$ , $25^{\circ}C$이었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.171-174
• /
• 2012

Thermophotovoltaics is the direct energy conversion technology from thermal to electric (voltaic) energy via photon radiation, without any thermodynamic cycle. It is, in general, accomplished by immersing solid body in high temperature heat source (e.g. combustion field), in order to achieve high intensity irradiation, and by receiving the radiation thereof on photovoltaic cells. In this paper, advantages of combustion in porous inert medium in applying to the thermophotovoltaics are discussed in a view of its excess enthalpy features. In addition, the similarities of flame behaviors in porous inert medium to both in single and multi-channels are described.

• 미생물학회지
• /
• 제16권3호
• /
• pp.131-139
• /
• 1978

Mycoplasma pneumoniae was examined for growth characteristics and morphology when cultivated in several media supplemented with a variety of sera and under different atmospheric conditions. different formula of the medium as well as different sources of lot numbers of the serum in the same medium exhibited varying effects on growth rate and adherence. When the organisms were cultivated in SSR-2 medium in a normal atmospheric environment or under a facultative anaerobic condition provided with carbon dioxide, they developed filamentous cells with heavy growth, whereas mainly round-shaped cells were produced under strict anaerobic conditions of hydrogen and carbon dioxide. Both morphologies of the organism were transformed by switching the incubation environments. An inverted phasecontrast microscopy using modified petri dishes was excellent to observe single cells and useful to follow the development of the cells. Growth, turbidity, and pneumoniae colonies developed on a solid medium and produced clear when overlaid with sheep blood agar.

• 미생물학회지
• /
• 제9권1호
• /
• pp.32-38
• /
• 1971

In solid culture of Endomycopsis fibuliger No.55, Eudomuopsis javanensis No.112 and Candida tropicalis No.340, the conditions of enzyme (protease, anylase and cellulase) production and the influence of addition of $(NH_4)_2;SO_4$ were examined, and the results obtained were as follows. 10 Wheat bran medium is found to be the best on the enzyme production in case of simple material. The optimum conditions ; are water content added 100 to 120%, temperature 25 to $80^{\circ}C$ and incubation times 2 to 3 days. 2) The cellulase production was scarely produced in the case of Endomyopsis fibuliger No.55, as well as, the amylase production was scarely producted in the case of Endomycopsis javanensis No.112 and Candida tropicalis No.340. 3) The enzyme production was remarkably increased when 5% of$(NH_4)_2;SO_4$ as inorganic nitrogen sources was admixed to wheat bran. 4) When 5% of $(NH_4)_2;SO_4$ was admixed to medium, the ratio of protein increase was 10.2 to 17.7% in wheat bran medium and 10.6 to 17.9% in sweet potato cake medium.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.343-344
• /
• 2012

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states. [1-3] We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.73-80
• /
• 2002

Cefuroxime axetil is a cephalosporin antibiotic having a high activity against a wide spectrum of Grampositive and Gram-negative microorganisms. It is a cephalosporin antibiotic which exist as 2 diastereoisomers: diastereoisomer A and B. It shows polymorphism of three forms: a crystalline form having a melting point of about $180^{\circ}C$, a substantially amorphous form having a high melting point of about $135^{\circ}C$ and a substantially amorphous form having a low melting point of about 70^{\circ}C$. The crystalline form of cefuroxime axetil is slightly soluble in water because diastereoisomer A has lower solubility than B in water. Substantially amorphous form of which there are no difference in solubility between diastereoisomer A and B has better solubility than crystalline form, but it forms a thicker gel than crystalline form upon contact with an aqueous medium. Based on this reason, cefuroxime axetil is not readily absorbable in the gastrointestinal tract, rendering its bioavailability on oral administration very low. The object of this study was to develop an improved non-crystalline cefuroxime axetil composition having a high physicochemical stability and bioavailability. A non-crystalline cefuroxime axetil solid dispersant showing no peak on a Differential Scanning Calorimetry (DSC) scan is prepared by dissolving cefuroxime axetil and a surfactant in an organic solvent; suspending a water-insoluble inorganic carrier in the resulting solution; and spray drying the resulting suspension to remove the organic solvent, said solid dispersant having an enhanced dissolution and stability of cefuroxime axetil and being useful for the preparation of a pharmaceutical composition for oral administration. Tablet was formulated with this cefuroxime axetil solid dispersant, disintegrants and other ingredients. It disintegrated and dissolved easily and dynamically in dissolution medium, so showed a good dissolution profile.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권1호
• /
• pp.78-84
• /
• 2005

The purpose of this study was to optimize the solid state cultivation of Monascus ruber on sterile rice. A single-level-multiple-factor and a single-factor-multiple-level experimental design were employed to determine the optimal medium constituents and to optimize carbon and nitrogen source concentrations for lovastatin production. Simultaneous quantitative analyses of the ${\beta}$-hydroxyacid form and ${\beta}$-hydroxylactone for of lovastatin were performed by the high performance liquid chromatography (HPLC) method with a UV photodiode-array (PDA) detector. The total lovastatin yield ($4{\sim}6\;mg/g$, average of five repeats) was achieved by adding soybean powder, glycerol, sodium nitrate, and acetic acid at optimized levels after 14 days of fermentation. The maximal yield of lovastatin under the optimal composition of the medium increased by almost 2 times the yield observed prior to optimization. The experimental results also indicated that the ${\beta}$-hydroxylactone form of lovastatin (LFL) and the ${\beta}$-hydroxyacid form of lovastatin (AFL) simultaneously existed in solid state cultures of Monascus ruber. while the latter was the dominant form in the middle-late stage of continued fermentation. These results indicate that optimized culture conditions can be used for industrial production of lovastatin to obtain high yields.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• KSBB Journal
• /
• 제8권4호
• /
• pp.382-389
• /
• 1993

초산이온이 대장균 성장을 저해하는 현상을 규명 하기 위해서 M9 배지, LB 배지를 사용해서 플라스 크, 발효조 배양을 수행하였다. 대장균의 초산 생성 은 높은 포도당 초기 농도, LB 배지와 같은 복합 배 지에서 활발하였고, 플라스크 배양과 같은 pH 조절 이 되지 않는 배양방법에셔는 초산의 생성에 따른 pH 감소에 따라 세포성장이 많이 저해되었다. 초산 을 외부에서 첨가하여 세포성장에 마치는 영향을 조 사하여 보았는데 LB 배지를 사용한 플라스크 배양 에서는 첨가된 초산의 농도가 2g/l 이상, M9 배지 를 사용한 플라스크 배양에서는 초산의 농도가 4g/l 이상, 그리고 M9 배지를 사용한 발효조 배양에 셔는 8g/l 이상에서 초산의 성장 저해효과가 나타 다. LB 한천 배지를 볕에 깐 LB 액체 배지의 플라스 크 배양을 수행하였다. LB 한천의 양이 증가함에 따라서 한천에서 포도당의 방출이 일어나 최종 대장 균 세포 O.D.가 증가하였다.