• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.367-373
• /
• 2011

This research is a basic researching process for producing solid fuel that mixing paper sludge and Heat Transfer Medium Oil. Under the presence of Heat Transfer Medium Oil, paper sludge is heated and dried with home appliance microwave for comparing drying efficiency and energy efficiency of different types of drying method. As a result, Heat Transfer Medium Oil and paper mixing case of drying method, OMD, is the most efficient way to shorten the time for evaporating moisture in the paper sludge. In addition, heat transfer effect and density is increased with adding Heat Transfer Medium Oil by microwave. Future more, OMD's energy cost for evaporating whole moisture is 78% cheaper than MD. Also, OMD process shows the best energy efficiency with comparing other process. Evaporation rate of paper sludge evaporation process with microwave is 11.66% increased by adding Heat Transfer Medium Oil 150g. Preheating Heat Transfer Medium Oil or improving different ways injecting Heat Transfer Medium Oil is a good way to increase a rate of initiative moisture evaporation process.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.113-120
• /
• 2011

Present studies are carried out to find media components and culture methods for in vitro propagation of Athyrium niponicum and to establish the optimal economic masspropagation systems. Among pinnae, petiole and rhizome segments only rhizome segments produced young plants. Rhizome segments showed vigorous plant regeneration on 1/2MS medium and supplement to 1% sucrose and 50 $mg{\cdot}L^{-1}$ $NaH_2PO_4$ were promoted the plant regeneration from rhizome segments. Kinetin was better than BA for plant regeneration and combination with 2 ${\mu}M$ kinetin and 5 ${\mu}M$ IBA was most efficient for plant regeneration. Solid or liquid medium with or without 0.1% qactivated charcoal in modified 1/2MS medium (1% sucrose, 50 $mg{\cdot}L^{-1}$ $NaH_2PO_4$, 2 ${\mu}M$ kinetin, 5 ${\mu}M$ IBA, pH 5.8) were used to find the optimal culture methods. The plant regeneration from rhizome segments were most vigorous on solid medium without activated charcoal. The addition of activated charcoal were inhibited the plant regeneration from rhizome segments not only on solid medium but also liquid stationary or suspension culture.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.169-174
• /
• 2008

The growth characteristics of Paecilomyces tenuipes according to the passage in the two kind of liquid media were investigated by comparing the mycelium and conidium formation degrees. The potato dextrose broth medium and the silkworm larvae medium containing the silkworm powder were used as the liquid media, and the potato dextrose agar medium and the brown rice medium containing the powder of silkworm pupa were used as the solid media. The conidium formation degree in liquid media differed by the passages but that in solid media was not. This suggested that the passage in liquid media did not affect significantly the conidium formation in solid media. When the brown rice media were inoculated with the concentration of $1{\times}10^{10}$ conidia/ml, $1{\times}10^8$ conidia/ml and $1{\times}10^6$ conidia/ml, respectively, the conidium formation degrees were similar. This indicated that the optimal inoculation concentration of conidium to the brown rice media is $1{\times}10^6$ conidia/ml.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.13-16
• /
• 2001

Maltose and soluble starch were used as secondary sources of carbon for glucoamylase production by Aspergillus awamori in solid state fermentation. During batch cultivation, maltose above 2.5%(w/w) repressed glucoamylase production, but, by adding either 2.5% (w/w) maltose or 1.25% (w/w) soluble starch to fed-batch cultivations, glucoamylase activity was increased by 15% and 170% over standard medium, respectively. The data showed that maltose is a weak inducer of glucoamylase production in solid stat fermentation.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.241-243
• /
• 2005

This paper describes development of intelligent solid insulated switchgear for next generation distribution line. Nowadays, for switchgear, increased to substitute eco-friendly environment and smart ability. In relation to a project to development of intelligent solid insulated switchgear, a comparison of insulation for substitution insulation medium, to show a composition of intelligent solid Insulated switchgear and valuation on characteristics for each of module.

• Korean Journal of Environmental Biology
• /
• v.23 no.2 s.58
• /
• pp.135-140
• /
• 2005

In order to construct an artificial cultivation of Nostoc flagelliforme on solid medium, we attempted to assess the viability of approaches, which utilized either BG-11 agar or sand medium using both sterile and non-sterile algal segments. In the trial in which the BG -11 agar medium was inoculated with the non-sterile algal segments, the algae exhibited the rapid growth in the initial 4 days of cultivation. However, after 4 days of cultivation, the growth rate of the algae slowed, and the algal growth was completely stopped by 7 days of cultivation. When the BG -11 medium was inoculated with the sterile algal segments, the algae exhibited the rapid growth for a longer period of 8 days, reaching a length of 24.9 mm. The growth rate during this period was measured to be $24.5\%$. After the 8 days of cultivation, the algal growth rate began to slow and had almost stopped by the 13 days of cultivation. On the other hand, when the sterile algal segments were inoculated onto a sand plate, the algal segments decomposed, reaching total decomposition after 11 days of cultivation. By way of contrast, the desiccation treatment samples continued to grow for 14 days of cultivation. After 14 days of cultivation, the algae achieved a length of 26.1 mm, with a growth rate of $30.6\%$. Our results indicate that periodic desiccation may constitute an effective strategy for the prevention of algal decomposition.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.260-267
• /
• 2023

We aimed to investigate the proportions of MTB- and NTM-positive tests and the distribution patterns of species isolated by contracted testing agencies in South Korea. Respiratory specimens submitted to contracted testing agencies in South Korea for AFB culture from January 2014 to December 2021 were included (533,713 specimens in total). Trends based on MTB and NTM detection, patient sex and age, culture medium type, and testing year were analyzed. MTB and NTM positive detection increased in the patients. The average ages of MTB- and NTM-positive patients increased in those aged ≥61 years. For solid culture, the MTB detection rate decreased from 5.9% in 2014 to 3.3% in 2018 and increased to 4.7% in 2021; the NTM detection rate increased from 2.1% in 2014 to 3.4% in 2018 and 3.7% in 2021. For liquid culture, the MTB detection rate decreased from 8.3% in 2014 to 5.5% in 2018 and increased to 6.0% in 2021; the NTM detection rate increased from 3.5% in 2014 to 5.5% in 2018 and decreased to 5.3% in 2021. An isolation ratio reversal between MTB and NTM was observed in 2018. In this study, we provide information on mycobacterial isolation rates and species distributions using AFB culture test results from Korea's referral laboratories. Increased MTB- and NTM-isolation rates were observed in individuals aged ≥60 years, indicating the need for regular testing and focused management for them. Expanding liquid culture applications, which show higher positivity rates than solid culture methods, is necessary.

• Geomechanics and Engineering
• /
• v.31 no.2
• /
• pp.159-166
• /
• 2022

The model of two-dimensional plane waves is analyzed in a micropolar-thermoelastic solid with microtemperatures in the context of the three-phase-lag model, dual-phase-lag model, and the Green-Naghdi theory of type III. Harmonic wave analysis is used to hold the solution to the problem. Numerical results of the physical fields are visualized to show the effects of the gravity field, magnetic field, and viscosity. The expression for the field variables is obtained generally and represented graphically for a particular medium.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.1
• /
• pp.33-40
• /
• 1992

This study was aimed to control the release characteristics of ketoprofen by microencapsulating $ketoprofen-{\beta}-cyclodextrin\;(KF-{\beta}-CyD)$ solid dispersion with Eudragit RS by the phase separation method using a nonaqueous vehicle. KF alone was also microencapsulated with Eudragit RS by the evaporation process in water phase. The results obtained showed that it was not possible to microencapsulate KF alone by phase separation in a chloroform-cyclohexane system while it was easy to microencapsulate $(KF-{\beta}-CyD)$ solid dispersion system. For the microcapsules, the release test was performed in the first fluid (pH 1.2) and the second fluid (pH 6.8) of K.P.V disintegration medium at $37^{\circ}C$. The release of KF from $(KF-{\beta}-CyD)$ solid dispersion microcapsules (1:1 core wall ratio) was more sustained than that from KF microcapsules, and followed zero-order kinetics. Especially, solid dispersion microcapsules showed pH-independent release patterns with higher wall to core ratio (1:1 w/w).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06a
• /
• pp.15-32
• /
• 1999

A relationship between stress and stain is very important to design a die to avoid defects of products during semi-solid forming process. Since the liquid will be of eutectic composition in alloys liquid segregation will result in significant or undesirable situation. The materials used in this experiment are A 357. A390, Al2024 alloys that is fabricated by the electro-magnetic stirring process from Pechiney in France. The compression test was performed by induction heating equipment and MTS. In order to prevent the liquid segregation these measured temperature would be useful to control of strain rate during compression test. The liquid segregation is controlled as change of the strain rate and solid fraction during the compression process, The characteristics of flow between solid and liquid phase considering liquid segregation is examined through the above experiments. In the case of medium and high volume fractions of solid the distribution of strain rate is calculated by using compression test data of semi-solid materials (SSM). The thixoforming experiments with the designed die are carried out successfully. The die filling patterns of SSM for variation of die temperature and pressing force have been investigated. The hardness of the thixoformed scroll products is evaluated in terms of the microstructure for each position.