• Progress in Superconductivity and Cryogenics
• /
• v.3 no.2
• /
• pp.77-83
• /
• 2001

The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.278-279
• /
• 2002

• KSBB Journal
• /
• v.25 no.2
• /
• pp.142-154
• /
• 2010

The protein-bound innerpolysaccharides (IPS) produced by suspended mycelial cultures of Inonotus obliquus have promising potentials as an effective antidiabetic as well as an immunostimulating agents. To enhance IPS production, intensive strain improvement process should be carried out using large amount of UV-mutated protoplasts. During the whole strain-screening process, the stage of solid growth-culture was found to be the most time-requiring step, thus preventing rapid screening of high-yielding producers. In order to reduce the cell growth period in the solid growth-stage, therefore, solid growth-medium was optimized using the statistical methods such as (i) Plackett-Burman and fractional factorial designs (FFD) for selecting positive medium components, and (ii) steepest ascent (SAM) and response surface (RSM) methods for determining optimum concentrations of the selected components. By adopting the medium composition recommended by the SAM experiment, significantly higher growth rate was obtained in the solid growth-cultures, as represented by about 41% larger diameter of the cell growth circle and higher mycelial density. Sequential optimization process performed using the RSM experiments finally recommended the medium composition as follows: glucose 25.61g/L, brown rice 12.53 g/L, soytone peptone 12.53 g/L, $MgSO_4$ 5.53 g/L, and agar 20 g/L. It should be noted that this composition was almost similar to the medium combinations determined by the SAM experiment, demonstrating that the SAM was very helpful in finding out the final optimum concentrations. Through the use of this optimized medium, the period for the solid growth-culture could be successfully reduced to about 8 days from the previous 15~20 days, thus enabling large and mass screening of high producers in a relatively short period.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.258-259
• /
• 2006

New powder compaction process, in which a Bingham semi-solid/fluid mold is utilized, is developed to fabricate micro parts. In the present process, a powder material is filled as slurry in a solid wax mold, dried and compressed. The wax is heated during compaction and becomes semi-solid state, which can acts as a pressurized medium for isostatic compaction. Since the compacted micro parts are very fragile, the mold's temperature is controlled to higher than its melting point during unloading, to avoid breakage of the compacts. To demonstrate effectiveness of this process, some micro compacts of alumina are shown as examples.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.208-215
• /
• 1988

The leaf mesophyll protoplasts of Populus alba ${\times}$ glandulosa were isolated from leaf of plantlet in vitro and cultured for plant regeneration. The MS medium (minus $NH_4NO_3$) with 0.5 mg/l BAP and 2.0 mg/l 2, 4-D showed the moderate frequency of dividing protoplasts cultured by the liquid plating method during the first week of culture. The percentage of colony formation was revealed the highest frequency by the gauze contained semi-solid agar plating method after 5 weeks cultured. Ridding out the gauze, the micro-callus was formed on the same semi-solid medium in 8 weeks after protoplasts culture. For proliferation of callus, mini-callus was transferred on the MS solid medium with 0.5 mg/l 2, 4-D and 0.1 mg/l BAP 12 weeks after culture. Shoot regeneration occurred when the calli derived from protoplasts were cultured on MS medium with 1.0 mg/l zeatin and such shoots could be readily rooted on the one half strengthen MS medium with non-phytohormone. Rooting shoots were planted in green-house 22 weeks after protoplast culture.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.815-818
• /
• 2021

The objective of this study was to develop a differential medium with improved selectivity for the isolation of Bacillus cereus. Mannitol egg yolk polymyxin medium supplemented with D-galactose allowed the differentiation of diarrheal- and emetic-type B. cereus through pH monitoring. The pH of the medium decreased significantly when incubating the emetic-type B. cereus, whereas the pH change was not significant when incubating the diarrheal-type. The addition of pH indicators, such as methyl red and phenol red, to the medium allowed visual differentiation between diarrheal- and emetic-type B. cereus. A solid agar medium was also developed by optimizing the concentrations of medium components such as monosaccharides, agar, egg yolk enrichment, pH indicators, and antibiotics. This study indicates the possibility of applying selective media for the differentiation of diarrheal- and emetic-type B. cereus.

• Journal of Plant Biotechnology
• /
• v.29 no.4
• /
• pp.253-257
• /
• 2002

To establish the optimum condition for plant regeneration from somatic embryos of Acanthopanax sessiliflorus Rupr. et Maxim, a medicinal plant, somatic embryos were induced from zygotic embryo-derived embryogenic callus in hormoen-free MS medium. To induce plantlet conversion, cotyledonary somatic embryos were cultured on MS solid medium with GA$_3$at various concentrations (0~10 mg/L) for three weeks. Plantlets were transferred to 1/3 MS solid medium with 0.5% charcoal for 7 weeks. Stem length was increased proportionally to the concentration and treatment period of GA$_3$. Also, the highest leaf width (8.9 mm) and leaf number (2.84) of plantlet were obtained when plantlets were converted on 5,10 mg/L GA$_3$pretreatments, respectively. The highest plant conversion frequency (66.7%) was obtained when the somatic embryos were cultured on medium containing 5 mg/L GA$_3$ for 3 weeks and then were transferred to 1/3 MS medium with 0.5% charcoal. The highest survival rate of soil transfer was 90% when plantlets were regenerated on medium with 5 mg/L GA$_3$ for 3 weeks and then transferred to plastic pots containing vermiculite and sand mixture for 4 weeks.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1053-1058
• /
• 2008

Porous medium was considered in the present study for the heat transfer enhancement. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. But when the air or water flow through in the porous medium, it is occurred the pressure drop between inlet and outlet. So in the present study investigated simulation result about the pressure drop in the porous medium before apply to heat exchanger. In this simulation, the thickness of the solid inside the porous medium region was varied 0.2 mm to 0.4 mm. And then the simulation result were compared the pressure drop in the same unit cell ($0.5\;mm{\times}0.5\;mm{\times}0.5\;mm$). To make the analysis model, it was assumed the 14-sided tetrakaidecahedron cell which has long been considered the optimal packing cell first proposed by the Lord Kelvin in 1887. And then the simulation is carried out using by STAR-CCM+ which is commercial software. The simulation result can be showed quantified pressure drop by solid effect in the porous medium.