• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.531-540
• /
• 2007

While determination of the solid propellant burning rates by ultrasound, it has been reported that the frequent data scatters were caused by two major factors; 1) variation in the acoustical properties, and 2) non-linear burning of a solid propellant sample under investigation. This work is carried out for the purpose of investigating the effect of non-linear burning of solid propellant samples. Specifically, we propose an ultrasonic measurement model that can predict the reflections from solid propellant surfaces with non-linear burning by the combination of two ingredients; 1) a pulse-echo ultrasonic measurement model for a planar, circular reflector imbedded in the second medium in an immersion set-up, and 2) an efficient model of non-linear burning surfaces with a number of small, planar circles. Then, we demonstrate the capability of the proposed measurement model by simulation of the surface echo signals from four different burning surfaces that have been generated by the combination of two factors; the base shape (flat or paraboloidal) and the surface roughness (perfectly smooth or randomly rough). From the simulation presented here, we can confirm the fact that the non-linear burning of the propellant can cause the waveform change of the burning surface echo and the corresponding spectrum variation.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.706-711
• /
• 2016

Characteristics of solid circulation rate in the liquid-solid circulating fluidized beds with viscous liquid medium were investigated. Effects of primary and secondary liquid velocities, particle size, liquid viscosity and height of solid particles piled up in the solid recycle device on the solid circulation rate were considered. The solid circulation rate increased with increasing primary and secondary liquid velocities, liquid viscosity and height of solid particles in the downcommer, but it decreased with increasing particle size. The particle rising velocity in the riser decreased with increasing the ratio of $U_{L1}/U_{L2}$ and particle size. The slip velocity of liquid and particle, $U_L/U_S$, decreased with increasing liquid viscosity but it increased with increasing particle size. The values of solid circulation rate were well correlated in terms of operating variables and dimensionless groups.

• Parasites, Hosts and Diseases
• /
• v.55 no.3
• /
• pp.233-238
• /
• 2017

Pathogenic Naegleria fowleri, Acanthamoeba castellanii, and Acanthamoeba polyphaga, are distributed worldwide. They are causative agents of primary amoebic meningoencephalitis or acanthamoebic keratitis in humans, respectively. Trophozoites encyst in unfavorable environments, such as exhausted food supply and desiccation. Until recently, the method of N. fowleri encystation used solid non-nutrient agar medium supplemented with heat-inactivated Escherichia coli; however, for the amoebic encystment of Acanthamoeba spp., a defined, slightly modified liquid media is used. In this study, in order to generate pure N. fowleri cysts, a liquid encystment medium (buffer 1) modified from Page's amoeba saline was applied for encystation of N. fowleri. N. fowleri cysts were well induced after 24 hr with the above defined liquid encystment medium (buffer 1). This was confirmed by observation of a high expression of differential mRNA of nfa1 and actin genes in trophozoites. Thus, this liquid medium can replace the earlier non-nutrient agar medium for obtaining pure N. fowleri cysts. In addition, for cyst formation of Acanthamoeba spp., buffer 2 (adjusted to pH 9.0) was the more efficient medium. To summarize, these liquid encystment media may be useful for further studies which require axenic and pure amoebic cysts.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2009

This study was conducted to find out the commercial in vitro propagation methods through protocom-like bodies (PLB) induced from shoot tip culture of Miltonia spp. Among several culture media for induction PLB from shoot tip in Miltonia spp., MS basal medium was better than Hyponex, Vacin & Went basal medium and other media supplemented with natural additives. PLB's proliferation and differentiation in Hyponex medium including $20g{\cdot}L^{-1}$ banana + $20g{\cdot}L^{-1}$ sucrose(pH 5.2) was better than in MS medium. It was tendency that solid media showed higher PLB fresh weight than liquid medium or other cotton bridge culture. The dark culture for 1~2 weeks and adding $10{\sim}20g{\cdot}L^{-1}$ sucrose on hyponex basal medium was the most effective to increase the PLBs growth and shoot number.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.684-693
• /
• 2012

The stormwater runoff from the increasing paved roads and vehicles resulted in the increase in the pollutants load to adjacent water bodies. The granular media filtration facilities are the most widely adopted to minimize the non-point source pollution from motorways. It is essential to consider the severe variation of hydraulic condition, suspended solid (SS) characteristics, and the medium characteristics for stormwater management filter. In this study, different types of media, including sand, were tested and the performance of downflow sand filters was investigated under various linear velocity and influent solid particle size. Results showed that the best medium is the coarse sand with large grain size, which showed the specific SS removal before clogging of more than $8.498kg/m^2$, the SS removal of higher than 95%, and minimum head loss. Linear velocity did not affect the total solid removal, while the performance was improved when fine solid was introduced. It is suggested that the life of a downflow sand filter bed can be extended by deep bed filtration when influent particles are fine. However, the captured particles can be washed out after a long period of operation.

• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.60-65
• /
• 2005

The objective of this work was to evaluate a solid-state fermentation process for the practical production of arachidonic acid(AA) by Mortierella alpina ATCC 32222. In the present investigation, batch culture kinetics for both submerged- and solid-state fermentations was carried out at $25^{\circ}C$ to identify the relationship between growth and arachidonic acid (AA) production. Glucose and yeast extract were used in submerged fermentations by using flasks, while rice bran was used as a sole raw material in the other type of fermentations by using a series of Petri dishes. It was evident that a mixed-growth associated pattern existed between the two variables, irrespective of modes of fermentations. The effect of carbon to nitrogen (CfN) ratio on AA production in solid-state fermentation was studied in the range of 6.5 - 20. As a result, an optimum condition was found to be 6.5. Supplementary carbon source was not necessary to meet the optimum C/N ratio. Unlike the Previous results obtained by other researchers, a supplement of sodium glutamate up to $4\%$ (w/w) to the rice bran medium did not have a positive effect on the AA productivity. However, an increase in AA productivity was obtained with the rice bran medium supplemented with sesame oil.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2004

This experiment was carried out to develop rapid mass propagation via shoot organogenesis system from adventitious roots of Rehmannia glutinosa. The induction of adventitious roots from leaf explants was most favorable to MS solid medium supplemented with 2mg/L IBA. However, the growth of adventitious roots was highest when they were cultured on 1/3 strength MS liquid medium supplemented with 2mg/L IBA. When the adventitious roots were grown in 10L bioreactor, 10g roots as initial inoculum was increased to 225g after 6 weeks of culture. The harvested roots were cultured onto solid medium to induce plant regeneration. The optimal adventitious shoot formation was observed on MS medium supplemented with 2mg/L BA. Rooting of individual shoots was induced after transfer to half strength MS medium without growth regulators. Plantlets after acclimatization were successfully transplanted in the field and no phenotypic variation was observed among them.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.456-461
• /
• 2005

This study was carried out to induce plant regeneration via shoot formation from sucker explants of Rubus fruticosus L. To induce adventitious shoots, sucker explants were sterilized in $1.2\%$ NaOCl solution, and cultured on the MS solid medium supplemented with kinetin (0.5, 1.0, 3.0 mg/L) and BA (0.5, 1.0, 3.0 mg/L), respectively. As above, to induce adventitious shoots, sucker explants were cultured on the MS solid medium supplemented with IBA (0, 0.1, 1.0 mg/L) and BA (0, 0.1, 1.0, 2.0 mg/L). After 4 weeks of culture, the highest frquency $(100\%)$ of shoot formation from sucker explants was obtained from the medium with 1.0 mg/L BA. The highest shoot number per explant from in vitro shoot explants was 5.3. After 10 weeks of culture, the number of shoot per explant was increased. The highest frequency $(85\%)$ of root formation was obtained at 0.5 mg/L glycine medium, when the explant with shoot were cultured on the MS medium containing glycine at various concentrations from 0 to 2.0 mg/L. The survival rate of the plantlets after transfer to plastic pots containing sand, soil, and vermiculite (1:1:1, vol.) was $95\%$. The results indicate that micropropagation procedure can be applied for an efficient mass propagation of Rubus fruticosus.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.358-364
• /
• 2006

This study was conducted to develop optimal solid culture medium for Tricholoma matsutake. As the solid matrix, granitic soil, perlite, vermiculate, pine sawdust and peat moss were compared regarding their effected on mycelial growth. Ergosterol content which is a fungal wall component was used as the growth index of the mycelia. Among the various solid matrixes, the granitic soil, perlite and mixture of the two supported the growth most. Barely flour appeared to be very effective on the stimulating of the mycelial growth when added to the solid matrix. An mixture of the matrix contained an even (1:1:1:1, v/v/v/v) mixture of granitic soil, perlite, vermiculate and pine sawdust. T. matsutake started growth 2 weeks after inoculation and reached stationary growth phase after 8th weeks in the solid matrix mixture. The mycelial density in the solid matrix was 7 times higher than that in fairy-ring soil. In addition, 30~70% water content and 10% humus soil in the solid matrix also supported good growth suggesting that T. matsutake needs humus soil for a nutrient sources. The solid matrix developed in the present study could be used to study physiological characteristics of T. matsutake as well.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.165-172
• /
• 2012

The stability of yellow and red dyes prepared from safflower (Carthamus tinctorius L.) in aqueous solution and in solid state was investigated. External factors such as light irradiation and temperature on the stability were examined during storage. Changes in absorbance of dye solutions and the color changes of fabrics dyed after long time storage were measured. Also, color reproducibility during storage was investigated by dyeing test on various fabrics. Red colorant in aqueous solution was very unstable to light, resulting that about 40% of absorbance were lost in 12hrs. The absorbance of yellow dye solutions was not decreased within 84hrs. In aqueous medium, yellow dye was much more stable than carthamin. Both dyes are relatively stable for long storage when they are stored in solid state compared to when in aqueous solution. Color changes are marginal in both dyes.