• 제목/요약/키워드: solid medium

검색결과 729건 처리시간 0.032초

Study on Solid Phase Extraction and Spectrophotometric Determination of Vanadium with 2-(2-Quinolylazo)-5-Diethylaminophenol

  • Hu, Qiu-Fen;Yang, Guan-Gyu;Huang, Zhang-Jie;Yin, Jia-Yuan
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권2호
    • /
    • pp.263-266
    • /
    • 2004
  • A sensitive, selective and rapid method has been developed for the determination ${\mu}$g/L level of vanadium ion based on the rapid reaction of vanadium(V) with 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP) and the solid phase extraction of the colored chelate with $C_{18}$ cartridge. The QADEAP reacts with V(V) in the presence of citric acid-sodium hydroxide buffer solution (pH = 3.5) and cetyl trimethylammonium bromide (CTMAB) medium to form a violet chelate of a molar ratio 1 : 2 (V(V) to QADEAP). This chelate was enriched by solid phase extraction with $C_{18}$cartridge and the enrichment factor of 50 was obtained by elution of the chelates from the cartridge with ethanol. The molar absorptivity of the chelate is $1.28 {\times}10^5L\;mol^{-1}cm^{-1}$ at 590 nm in the measured solution. Beer's law is obeyed in the range of 0.01-0.6 ${\mu}$g/mL. The detection limit is 0.04 ${\mu}$g/L in the original samples. This method was applied to the determination of vanadium(V) in water and biological samples with good results.

Solid Matrix Priming with Hydrogels on Heteropappus arenarius Seeds

  • Lee, Chang Hee
    • 원예과학기술지
    • /
    • 제31권6호
    • /
    • pp.700-705
    • /
    • 2013
  • This study was initiated to evaluate hydrophilic polymers (hydrogels) as a new solid matrix medium for seed-priming of Heteropappus arenarius Kitam. Solid matrix priming (SMP)-media were prepared with the combination of Na- and K-based hydrogels and hydrogels with three different dry levels (DC; 70%, 80%, and 90%). Priming was performed in the dark at 15 or $20^{\circ}C$ for 24 hours, and all primed seeds were incubated at $20^{\circ}C$ in the dark for the germination test. Non-primed seeds and seeds primed with distilled water (DW) were also included. To reach the germination rate of 50% ($T_{50}$), it took 4.0 days for non-primed seeds, and 3.6 and 3.9 days for DW-primed seeds at 15 and $20^{\circ}C$, respectively. Na-based hydrogel-primed seeds with 70% DC (Na 70%) showed the fastest germination, which respectively took and 1.9 and 1.8 days at 15 and $20^{\circ}C$ to $T_{50}$. K-based hydrogel-primed seeds with 70% DC showed the fastest germination among K-based hydrogels with various DC levels, but it took 0.6 days more to $T_{50}$ compared to Na 70%. The hydration rate (HR) of DW-primed seeds was 37% lower than that of Na 70%-primed seeds at $15^{\circ}C$ priming temperature, which indicates that Na 70% priming is the best solid matrix priming condition for promoting the germination of H. arenarius seeds.

Vibration analysis of spherical sandwich panels with MR fluids core and magneto-electro-elastic face sheets resting on orthotropic viscoelastic foundation

  • Kargar, Javad;Arani, Ali Ghorbanpour;Arshid, Ehsan;Rahaghi, Mohsen Irani
    • Structural Engineering and Mechanics
    • /
    • 제78권5호
    • /
    • pp.557-572
    • /
    • 2021
  • The current study considers free vibration of the spherical panel with magnetorheological (MR) fluids core and magneto-electro-elastic face sheets. The panel is subjected to electro-magnetic loads and also is located on an orthotropic visco-Pasternak elastic foundation. To describe the displacement components of the structure, the first-order shear deformation theory (FSDT) is used and the motion equations are extracted by employing Hamilton's principle. To solve the motion differential equations, Navier's method is selected as an exact analytical solution for simply supported boundary conditions. Effect of the most important parameters such as magnetic field intensity, loss factor, multi-physical loads, types of an elastic medium, geometrical properties of the panel, and also different material types for the face sheets on the results is considered and discussed in details. The outcomes of the present work may be used to design more efficient smart structures such as sensors and actuators.

당근체세포배의 발생 및 발아에 미치는 배지표면의 물리적변화 (Enhanced Development and Germination of Carrot Somatic Embryos on Modified Surface of Medium)

  • SOH, Woong-Young;LEE, Eun-Kyong;CHO, Duck-Yee
    • 식물조직배양학회지
    • /
    • 제25권4호
    • /
    • pp.231-236
    • /
    • 1998
  • 배지상에 여과지를 덮어놓는 간단한 물리적 처리가 체세포배의 발생 및 발아에 미치는 영향을 밝히기 위하여 본 실험관찰을 수행하였다. 배지상에 덮어놓은 세장의 여과지위에서 일주일 동안 당근 자엽절편을 배양한 후 MS 기본배지에 계대배양을 하면 여과지 덮개 없는 배지에서의 체세포배발생 보다 2배에서 39배의 배발생을 나타내었고, 체세포배의 성숙 및 발아도 증진되었다. 배지상의 여과지에 배양액을 첨가한 다음 배양을 하면 여과지에 배양액을 첨가하지 않은 경우보다 배발생이 감소되었다. 그러므로 여과지덮개는 자엽절편을 치상한 배양환경의 습기를 변화시켜 체세포배의 발생을 증진시킨 것으로 생각된다.

  • PDF

파일럿규모 슬러리 기포탑에서 기포체류량의 축방향, 반경방향 분포 (Axial and Radial Distributions of Bubble Holdup in a Slurry Bubble Column with Pilot Plant Scale)

  • 임대호;장지화;강용;전기원
    • Korean Chemical Engineering Research
    • /
    • 제49권2호
    • /
    • pp.200-205
    • /
    • 2011
  • 직경 1.0 m인 파일럿 규모 슬러리 기포탑에서 기포체류량의 축방향, 반경방향분포를 고찰하였다. 기체의 유속, 연속 액상의 표면장력 그리고 슬러리상에 포함된 고체입자의 분율이 기포탑 내부 기포의 축방향 및 반경방향 분포에 미치는 영향을 검토하였다. 본 연구의 실험조건 모두에서 체류량은 기포탑의 중심으로부터 반경방향 무차원 거리가 증가함에 따라 감소하였으며, 기포탑의 분산판으로부터 축방향의 무차원의 거리가 증가함에 따라 증가하였다. 기포체류량의 반경방향 불균일도는 기체의 유속이 증가함에 따라 연속 액상의 표면장력이 감소함에 따라 증가하였으나 슬러리상에 포함된 고체입자 분율에는 크게 영향을 받지 않았다. 본 연구의 범위에서 축방향과 반경방향 기포체류량의 분포는 각각의 실험변수의 상관식으로 나타낼 수 있었다.

제주 송이를 이용한 방울토마토 양액재배시 양액성분 및 생육에 관한 연구 (Study on the Nutrient Solution Content and Growth of Cherry Tomato in Scoria Culture)

  • 장전익;오대민;현해남
    • 생물환경조절학회지
    • /
    • 제4권1호
    • /
    • pp.43-49
    • /
    • 1995
  • 양액재배에서 제주송이가 다른 배지와 비교하여 방울토마토의 수량 및 품질에 미치는 영향과 양액성분 변화를 조사하여 제주송이를 양액재배용 고형배지로 실용화하기 위하여 시험한 결과는 다음과 같다. 1. 건엽비, 건과비, 당산비는 1익㉣ 1회 1시간 담액후에 완전 배액한 구에서 높았다. 2. 방울토마토 생과중은 상위 화방으로 갈수록 암면구와 담액수경구는 작아졌으나, 송이구와 일향토구, 펄라이트구 등 고형배지경에서 무거웠다. 3. 방울토마토의 생육이 왕성한 시기에 양액성분중 다량원소를 분석한 결과는 송이 재배구에서 인산과 칼륨 농도가 낮았다. 4. 방울토마토의 수량과 당도는 암면과 일향토구에서 높은 경향을 보였다. 5. 일반적으로 양액재배에서는 수분의 증발과 식물의 수분 흡수 증산작용으로 비료염의 농도가 높아가는데 송이구도 다른 고형배지경과 비슷한 결과를 보였다. 6. 제주 송이 양액재배용 고형배지로 손쉽게 이용할 수 있는 가벼운 자재로 가공개발 연구가 있어야 할 것으로 본다.

  • PDF

Buckling and vibration analyses of MGSGT double-bonded micro composite sandwich SSDT plates reinforced by CNTs and BNNTs with isotropic foam & flexible transversely orthotropic cores

  • Mohammadimehr, M.;Nejad, E. Shabani;Mehrabi, M.
    • Structural Engineering and Mechanics
    • /
    • 제65권4호
    • /
    • pp.491-504
    • /
    • 2018
  • Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

액체배지배양에서 당근 체세포배의 발아 억제 현상 (Germination Arrest of Carrot Somatic Embryos Cultured in Liquid Medium)

  • 소웅영;이은경;홍성식;조덕이
    • 식물조직배양학회지
    • /
    • 제27권3호
    • /
    • pp.175-180
    • /
    • 2000
  • 발아를 위한 MS 액체배지에서 체세포배를 1주일간 배양하다가 고형배지로 옮겨 배양하면 92%가 발아하지만 액체배지 배양기간이 길어지면 발아율이 낮아져서 4주간 배양 후 고체 배지로 옮기면 26% 밖에 발아하지 않았다. 액체배지에서 발아처리된 체세포배는 배축과 유근의 생장은 충실하게 일어나데 일부에서는 배축에 2차배가 발생되거나 배축과 유근 기부에서 캘러스가 형성된 경우도 있었다. 주사전자현미경에 의한 관찰 결과 경정분열조직을 이루고 있는 세포는 엉성하게 배열되어 있고 제1엽원기가 발생된 경우 그 구조가 충실하지 못하여 생장이 중단되어 있으며 엽원기의 발생이 않된 경우도 있었다. 그러므로 액체배지에서 체세포배의 발아가 억제된 원인은 경정분열조직의 구조적 결함으로 경엽부 형성이 일어나지 못하기 때문으로 사료된다.

  • PDF

Establishment of an Efficient Agrobacterium Transformation System for Eggplant and Study of a Potential Biotechnologically Useful Promoter

  • Claudiu Magioli;Ana Paula Machado da Rocha;Pinheiro, Marcia-Margis;Martins, Gilberto-Sachetto;Elisabeth Mansur
    • Journal of Plant Biotechnology
    • /
    • 제2권1호
    • /
    • pp.43-49
    • /
    • 2000
  • An efficient and reliable Agrobacterium transformation procedure based on TDZ (thidiazuron)-induced organogenesis was established and applied to six Brazilian eggp1ant varieties. Optimum transgenic plants recovery was achieved upon the study of the following parameters affecting transformation efficiency, using F-100 variety as a model: i) explant source; ii) pre-culture period; iii) physical state of the pre-culture medium and iv) coculture conditions. The highest frequency of kanamycin-resistant calli derived from leaf explants (5%) was obtained without a pre-culture period and co-cultivation for 24 h in liquid medium followed by five days on solid RM (regeneration medium). For cotyledon explants, best results were achieved upon a pre-culture of 24 h in liquid RM and a co-cultivation period of 24 h in liquid RM followed by three days in solid RM, resulting in a transformation Sequency of 22.7%. Kanamycin-resistant organogenic calli were also obtained from cultivars Emb, Preta Comprida, Round nose Shaded, Campineira and Florida Market. The expression pattern of an epidermis-specific promoter was studied using transformants expressing a chimaeric construct comprised by the promoter Atgrp-5 transcriptionally fused to the coding region of the gus gene. The expression pattern was similar to that previously observed in tobacco and Arabidopsis thaliana, with preferential expression at the epidermis and the stem phloem. These results support the idea that the Atgrp-5 promoter can be used to drive defense genes in these tissues, which are sites of pathogen interaction and spread, in programs for the genetic improvement of eggplant.

  • PDF

사물인터넷 기반 새싹삼용 고형배지, 베드 및 생육환경관리시스템 개발 (Development of Solid Culture Medium, Bed and Growing Environment Management System for Ginseng Sprout Based on IoT)

  • 주낙근
    • 한국정보통신학회논문지
    • /
    • 제25권9호
    • /
    • pp.1254-1262
    • /
    • 2021
  • 최근 우리나라는 농업인구의 고령화와 감소로 농업 환경이 급격히 변하고 있으며 이러한 문제를 해결하기 위해서는 농업의 생산성 향상과 노동력 절감이 절실히 요구되고 있다. 이러한 문제를 해결하기 위해 ICT 기술과 융합된 스마트팜이 그 한 대안으로 제시되고 있다. 국내에서 스마트팜은 현재 주로 온실에 보급되어 활용되고 있다. 본 논문에서는 이러한 스마트팜 기술을 새싹삼을 재배하는데 적용하고자 한다. 이를 위해 묘삼(1.0g내외)을 사용하여 온실에서 수경재배와 화학농약을 사용하지 않는 청정한 환경관리 기술로 단기간(2~3개월)에 생산되는 수삼인 새싹삼을 재배하기 위한 고형 배지, 베드를 개발하였다. 또 이러한 환경에서 새싹삼의 생육과정을 모니터링하고 구동장치들을 제어하기 위해 사물인터넷 기반의 생육환경관리시스템을 개발하였다.