DOI QR코드

DOI QR Code

Buckling and vibration analyses of MGSGT double-bonded micro composite sandwich SSDT plates reinforced by CNTs and BNNTs with isotropic foam & flexible transversely orthotropic cores

  • Mohammadimehr, M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Nejad, E. Shabani (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Mehrabi, M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • 투고 : 2017.10.03
  • 심사 : 2017.12.26
  • 발행 : 2018.02.25

초록

Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan

참고문헌

  1. Akbari Alashti, R. and Khorsand, M. (2012), "Three-dimensional dynamo-thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by DQ-FD coupled", J. Pre.Vessel. Pip., 96, 49-67.
  2. Ansari, R., Faghih Shojaei, M. and Rouhi, H. (2015), "Small-scale Timoshenko beam element", Eur. J. Mech. A/Sol., 53, 19-33. https://doi.org/10.1016/j.euromechsol.2015.02.005
  3. Ansari, R., Gholami, R., Faghih Shojaei, M., Mohammadi, V. and Sahmani, S. (2013), "Size-dependent bending, buckling and free vibration of functionally graded Timoshenko micro beams based on the most general strain gradient theory", Compos. Struct., 100, 385-397. https://doi.org/10.1016/j.compstruct.2012.12.048
  4. Araujo, A.L., MotaSoares, C.M. and MotaSoares, C.A. (2010), "Finite element model for hybrid active-passive damping analysis of anisotropic laminated sandwich structures", J. Sandw. Struct. Mater., 12, 397-419. https://doi.org/10.1177/1099636209104534
  5. Bahaadini, R., Hosseini, M. and Jamalpoor, A. (2017), "Nonlocal and surface effects on the flutter instability of cantilevered nanotubes conveying fluid subjected to follower forces", Phys. B, 509, 55-61. https://doi.org/10.1016/j.physb.2016.12.033
  6. Bahadori, R. and Najafizadeh, M.M. (2015), "Free vibration analysis of two-dimensional functionally graded axisymmetric cylindrical shell on Winkler-Pasternak elastic foundation by first-order shear deformation theory and using navier-differential quadrature solution methods", Appl. Math. Model, 139, 4877-4894.
  7. Batra, R.C., Porfiri, M. and Spinell, D. (2008a), "Vibrations of narrow micro beams predeformed by an electric field", J. Sound Vibr., 309, 600-612. https://doi.org/10.1016/j.jsv.2007.07.030
  8. Batra, R.C., Porfiri, M. and Spinell, D. (2008b), "Vibrations and pull-in instabilities of micro electro mechanical Von Karman elliptic incorporating the casimir force", J. Sound Vibr., 315, 939-960. https://doi.org/10.1016/j.jsv.2008.02.008
  9. Botshekanan Dehkordi, M., Cinefra, M., Khalili, S.M.R, and Carrera, E. (2013), "Mixed LW/WSL models for the analysis of sandwich plates with composite faces", Compos. Struct., 98, 330-339. https://doi.org/10.1016/j.compstruct.2012.11.016
  10. Chakrabarti, A., Mukhopadhyay, B. and Bera, R.K. (2007), "Nonlinear stability of a shallow unsymmetrical heated orthotropic sandwich shell of double curvature with orthotropic core", J. Sol. Struct., 44, 5412-5424. https://doi.org/10.1016/j.ijsolstr.2007.01.004
  11. Chen, X. and Feng, Z. (2017), "Dynamic behavior of a thin laminated plate embedded with auxetic layers subject to in-plane excitation", Mech. Res. Comm., 85, 45-52. https://doi.org/10.1016/j.mechrescom.2017.07.013
  12. Civalek, O., Demir, C. and Akgoz, B. (2009), "Static analysis of single walled carbon nanotubes (SWCNT) based on Eringen's nonlocal elasticity theory", J. Engin. Appl. Sci., 2, 47-56.
  13. Dai, H.L., Zhao, D.M., Zou, J.J. and Wang, L. (2016), "Surface effect on the nonlinear forced vibration of cantilevered nanobeams", Phys. E, 80, 25-30. https://doi.org/10.1016/j.physe.2016.01.008
  14. Ergun, E., Yilmaz, Y. and allioglu, H. (2016), "Free vibration and buckling analysis of the impacted hybrid composite beams", Struct. Eng. Mech., 59, 1055-1070 https://doi.org/10.12989/sem.2016.59.6.1055
  15. Farajpour, A., Rastgoo, A. and Mohammadi, M. (2017), "Vibration, buckling and smart control of microtubules using piezoelectric nanoshells under electric voltage in thermal environment", Phys. B, 509, 100-114. https://doi.org/10.1016/j.physb.2017.01.006
  16. Ferreira, A.J.M., Araujo, A.L., Neves, A.M.A, Rodrigues, J.D., Carrera, E., Cinefra, M. and Soares, C.M. (2013), "A finite element model using a unified formulation for the analysis of viscoelastic sandwich laminates", Compos. B, 45, 1258-1264. https://doi.org/10.1016/j.compositesb.2012.05.012
  17. Ghorbanpour Arani, A. and Zamani, M.H. (2017), "Investigation of electric field effect on size-dependent bending analysis of functionally graded porous shear and normal deformable sandwich nanoplate on silica aerogel foundation", J. Sandw. Struct. Mater.
  18. Ghorbanpour Arani, A., Khani Arani, H and Khoddami Maraghi, Z. (2016), "Vibration analysis of sandwich composite micro plate under electro-magneto-mechanical loadings", Appl. Math. Model, 40, 10596-10615. https://doi.org/10.1016/j.apm.2016.07.033
  19. Ghorbanpour Arani, A., Shajari, A.R., Amir, S. and Loghman, A. (2012), "Electro-thermo-mechanical nonlinear nonlocal vibration and instability of embedded micro-tube reinforced by BNNT, conveying fluid", Phys. E, 45, 109-121. https://doi.org/10.1016/j.physe.2012.07.017
  20. Kaghazian, A., Hajnayeb, A. and Foruzande, H. (2017), "Free vibration analysis of a piezoelectric nanobeam using nonlocal elasticity theory", Struct. Eng. Mech., 6, 617-624.
  21. Ke, L.L, Wang, Y.Sh. Yang, J. and Kitipornchai, S. (2012), "Free vibration of size-dependent Mindlin micro plates based on modified couple stress theory", J. Sound Vibr., 331, 94-106. https://doi.org/10.1016/j.jsv.2011.08.020
  22. Kolahchi, R., Zarei, M.S., Hajmohammad, M.H. and Oskouei, A.N. (2017), "Visco-nonlocal-refined Zigzag theories for dynamic buckling of laminated nanoplates using differential cubature-Bolotin methods", Thin Wall. Struct., 113, 162-169. https://doi.org/10.1016/j.tws.2017.01.016
  23. Kutlu, A. and Omurtag, M.H. (2012), "Large deflection bending analysis of elliptic plates on orthotropic elastic foundation with mixed finite element method", J. Mech. Sci., 65, 64-74. https://doi.org/10.1016/j.ijmecsci.2012.09.004
  24. Larbi, W., Deu, J.F. and Ohayon, R. (2016), "Vibroacoustic analysis of double-wall sandwich panels with viscoelastic core", Comput. Struct., 174, 92-103. https://doi.org/10.1016/j.compstruc.2015.09.012
  25. Lau, A.K.T. and Hui, D. (2002), "The revolutionary creation of new advanced materials- carbon nanotube composites", Compos. B, 33, 263-277. https://doi.org/10.1016/S1359-8368(02)00012-4
  26. Lei, Z.X., Liew, K.M. and Yu, J.L. (2013), "Buckling analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-ritz method", Compos. Struct., 98, 160-168. https://doi.org/10.1016/j.compstruct.2012.11.006
  27. Li, D.H., Wang, R.P., Qian, R.L., Liu, Y. and Qing, G.H. (2016), "Static response and free vibration analysis of the composite sandwich structures with multi-layer cores", J. Mech. Sci., 111-112, 101-115. https://doi.org/10.1016/j.ijmecsci.2016.04.002
  28. Mantari, J.L. and Monge, J.C. (2016), "Buckling, free vibration and bending analysis of functionally graded sandwich plates based on an optimized hyperbolic unified formulation", J. Mech. Sci., 119, 170-186. https://doi.org/10.1016/j.ijmecsci.2016.10.015
  29. Mirjavadi, S.S., Rabby, S., Shafiei, N., MohaselAfshar, B. and Kazemi, M. (2017), "on size-dependent free vibration and thermal buckling of axially functionally graded nanobeams in thermal environment", Appl. Phys. A, 123, 315-325. https://doi.org/10.1007/s00339-017-0918-1
  30. Mirsalehi, M., Azhari, M. and Amoushahi, H. (2017), "Buckling and free vibration of the FGM thin micro-plate based on the modified strain gradient theory and the spline finite strip method", Eur. J. Mech. A/Sol., 61, 1-13.
  31. Mohammadimehr, M. and Alimirzaei, S. (2016a), "Nonlinear static and vibration analysis of Euler-Bernoulli composite beam model reinforced by FG-SWCNT with initial geometrical imperfection using FEM", Struct. Eng. Mech., 59(3), 431-454. https://doi.org/10.12989/sem.2016.59.3.431
  32. Mohammadimehr, M. and Mehrabi, M. (2017), "Stability and vibration analysis of double-bonded micro composite sandwich cylindrical shells conveying fluid flow", Appl. Math. Model, 47, 685-709. https://doi.org/10.1016/j.apm.2017.03.054
  33. Mohammadimehr, M., Mohammadi Hooyeh, H., Afshari, H. and Salarkia, M.R. (2017), "Free vibration analysis of double-bonded isotropic piezoelectric Timoshenko microbeam based on strain gradient and surface stress elasticity theories under initial stress using differential quadrature method", Mech. Adv. Mater. Struct., 24(4), 287-303. https://doi.org/10.1080/15376494.2016.1142022
  34. Mohammadimehr, M., Mohandes, M. and Moradi, M. (2016b), "Size dependent effect on the buckling and vibration analysis of double-bonded nanocomposite piezoelectric plate reinforced by boron nitride nanotube based on modified couple stress theory", J. Vibr. Contr., 22, 1790-1807. https://doi.org/10.1177/1077546314544513
  35. Mohammadimehr, M., Okhravi, S.V. and Akhavan Alavi, S.M. (2016c), "Free vibration analysis of magneto-electro-elastic cylindrical composite panel reinforced by various distributions of CNTs with considering open and closed circuits boundary conditions based on FSDT", J. Vibr. Contr., 1-9.
  36. Mohammadimehr, M., Salemi, M. and Rousta Navi, B. (2016d), "Bending, buckling and free vibration analysis of MSGT micro composite reddy plate reinforced by FG-SWCNTs with temperature-dependent material properties under hydro-thermo-mechanical loadings using DQM", Compos. Struct., 138, 361-380. https://doi.org/10.1016/j.compstruct.2015.11.055
  37. MosallaieBarzoki, A., GhorbanpourArani, A., Kolahchi, R. and Mozdianfard, M.R. (2012), "Electro-thermo-mechanical torsional buckling of a piezoelectric polymeric cylindrical shell reinforced by DWBNNTs with an elastic core", Appl. Math. Model, 36, 2983-2995. https://doi.org/10.1016/j.apm.2011.09.093
  38. Nasihatgozar, M., Daghigh, V., Eskandari, M., Nikbin, K. and Simoneau, A. (2016), "Buckling analysis of piezoelectric cylindrical composite panels reinforced with carbon nanotubes", J. Mech. Sci., 107, 69-79. https://doi.org/10.1016/j.ijmecsci.2016.01.010
  39. Reissner, E. (1948), "Finite deflections of sandwich plates", J. Aero. Sci., 15, 435-440. https://doi.org/10.2514/8.11610
  40. Rikards, R., Chate, A. and Barkanov, E. (1993), "Finite element analysis of damping the vibrations of laminated composites", Comput. Struct., 47, 1005-1015. https://doi.org/10.1016/0045-7949(93)90305-W
  41. Robin, G., Mathieu, N., Jrad, M., Daya, E.M. and Choquart, F. (2017), "The effect of the geometric parameters of the corrugation shape on the vibration analysis of 3D structured beams", Mech. Res. Comm, 84, 65-71. https://doi.org/10.1016/j.mechrescom.2017.06.006
  42. Rouhi, H., Ansari, R. and Darvizeh, M. (2016), "Size-dependent free vibration analysis of nano shells based on the surface stress elasticity", Appl. Math. Model, 40, 3128-3140. https://doi.org/10.1016/j.apm.2015.09.094
  43. Shen, H., Wang, H. and Yang, D. (2017), "Vibration of thermally post-buckled sandwich plates with nanotube-reinforced composite face sheets resting on elastic foundation", J. Mech. Sci., 124-125, 253-262. https://doi.org/10.1016/j.ijmecsci.2017.03.015
  44. Shooshtari, A. and Razavi, S. (2015), "Nonlinear vibration analysis of rectangular magneto-electro-elastic thin plates", J. Eng., 28, 139-147.
  45. Swaminathan, K. and Sangeetha, D.M. (2017), "Thermal analysis of FGM plates-a critical review of various modelling techniques and solution methods", Compos. Struct., 160, 43-60. https://doi.org/10.1016/j.compstruct.2016.10.047
  46. Thostenson, E.T., Ren, Z. and Chou, T.W. (2001), "Advances in the science and technology of carbon nanotubes and their composites: a review", Compos. Sci. Technol., 61, 1899-1912. https://doi.org/10.1016/S0266-3538(01)00094-X
  47. Wang, W.L. and Hu, S.J. (2005), "Modal response and frequency shift of the cantilever in a noncontact atomic force microscope", Appl. Phys. Lett., 87, 183-506.
  48. Wang, Y.G., Song, H.F., Lin, W.H. and Xu, L. (2017), "Large deflection analysis of functionally graded circular microplates with modified couple stress effect", J. Braz. Soc. Mech. Sci. Eng., 39, 981-991. https://doi.org/10.1007/s40430-016-0564-0
  49. Xu, X., Rong, D., Lim, C.W., Yang, C. and Zhou, Z. (2017), "An analytical symplectic approach to the vibration analysis of orthotropic graphene sheets", Acta. Sinica, 1-14.
  50. Yan, J.B. and Richard Liew, J.Y. (2016), "Design and behavior of steel-concrete-steel sandwich plates subject to concentrated loads", Compos. Struct., 150, 139-152. https://doi.org/10.1016/j.compstruct.2016.05.004
  51. Zhao, R., Yu, K., Hulbert, G.M., Wu, Y. and Li, X. (2017), "Piecewise shear deformation theory and finite element formulation for vibration analysis of laminated composite and sandwich plates in thermal environments", Compos. Struct., 160, 1060-1083. https://doi.org/10.1016/j.compstruct.2016.10.103
  52. Zhu, P., Lei, Z.X. and Liew, K.M. (2012), "Static and free vibration analyses of carbon nano tube-reinforced composite plates using finite element method with first order shear deformation theory", Compos. Struct., 94, 1450-1460. https://doi.org/10.1016/j.compstruct.2011.11.010

피인용 문헌

  1. Magneto-mechanical vibration analysis of single-/three-layered micro-Timoshenko porous beam and graphene platelet as reinforcement based on modified strain gradient theory and differential quadrature vol.27, pp.15, 2021, https://doi.org/10.1177/1077546320949083
  2. New solution for damaged porous RC cantilever beams strengthening by composite plate vol.10, pp.3, 2018, https://doi.org/10.12989/amr.2021.10.3.169
  3. Forced vibration analysis of a micro sandwich plate with an isotropic/orthotropic cores and polymeric nanocomposite face sheets vol.28, pp.3, 2018, https://doi.org/10.12989/cac.2021.28.3.259