• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.55-68
• /
• 1989

This experiment was carried out to investigate the crack of coated Nitrocellulose Lacquer on flatand edge-grained boards of Quercus acutissima, ring-porous wood, and Betula platyphylla var. japonica, diffuse-porous wood, by variations of moisture contents at 7, 13 and 21%. Cold check system was used as an accelerating method for crack development, in which one cycle of the system consisted of 10 replications of each unit cycle, $60^{\circ}C$ for 4hr followdd by $-20^{\circ}C$ for 4hr. The analysis of Nitrocellulose Lacquer characteristics was made by means of water permeation measurement, F.T.I.R. spectroscopy, N.M.R. spectroscopy, gel permeation chromatography, gas chromatography, and D.S.C. The results obtained were as follows: 1. The number of cracks increased with the increasing moisture content of board. 2. The crack of coated film on flat-grained board was fewer in number than on edge-grained board. 3. The crack occurred in Quercus acutissima was more numerous on edge-grained board but less frequent on flat-grained board compared with that in Betula platyphylla var. japonica, respectively. 4. The cold crack vertically developed to the grain both in Quercus acutissima and Betula platyphylla var. japonica. 5. Water permeability in intermediate coated film was lower than in under and top coated film, but the difference was not confirmed between under and top coated film.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.123-132
• /
• 1987

Yttria-stabilized zirconia with erbia-lanthana were investigated with respect to the amount of Ln2O3 (Ln; Er, La) addition in the range of 0.5∼5 mol% to the base composition of 8 mol% yttriazirconia. Following analysis and measurement were adopted for the characterization of synthesizes of solid electrolyte; phase transformation, lattice parameter, crystallite size, relative density, chemical composition and SEM/EDS. Electrical conductivity by two-probe method versus temperature from 350$^{\circ}C$ to 800$^{\circ}C$ and frequency in the range of 5Hz∼13MHz by complex impedance method was also conducted together with the determination of oxygen ion transference number by EMF method for the evaluation of their electrical properties. The results were as followsing; Electrical conductivity were decreased with increase in Ln2O3 content, but their activation energies increased. In the case of La2O3 addition, espicially, its electrical conductivity was decreased owing to the segregation of second phases at the grain-boundary. Grain-boundary conductivity of the specimen contained 0.5 mol% Er2O3 exhibited a maximum conductivity among thecompositions experimented. However, their bulk conductivities decreased in both case. Oxygen ion transference number was also reduced with decrease in oxygen partial pressure. For example, in the case of Er2O3 addition it retained value in the range of 0.97∼0.94 abvove 4.74${\times}$10-2in oxygen partial pressure. With the increase in the quantities of the evaporation of additive components, the crystallite size of stabilized zirconia decreased, and their relative density also reduced owing to the formation of porosity in their matrices. In the case of La2O3 the sinterbility was improved in the limited amount of addition up to 0.5 mol%, in the same range of addition the strength of sintered bodies were improved perhaps owing to the precipitation of metastable tetragonal phase in the fully stabilized zirconia.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.1
• /
• pp.17-23
• /
• 2009

Current status on consumption and packaging of sweet persimmons in USA was surveyed by visiting the market, and three sea shipments were conducted as model export trial from Korean to USA with measurement in ship container temperature and fruit quality. Strategy to promote the export of Korean persimmons was derived. There have been gradual decrease in the price of persimmons due to their increases production, but there seems potential growth in consumption of the fruits from Asian, Hispanic and American people. Compared to the fruits from other countries, Korean persimmons are desired to have higher soluble solid content with stronger red color, but too large sizes are not favored in American market. There has often been temperature fluctuation in shipment container during the sea transport to USA, resulting in surface blackening, skin black spotting and flesh softening. Plastic bag packages with inappropriate unitizing crimping were found to sometimes build up unproper modified atmosphere (high $O_2$ and low $CO_2$) giving high rate of physiological injury.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.367-376
• /
• 2002

Electrical conduction in $SrZr_{1-x}Y_xO_{3-\delta}$((x=0.05, 0.10)-metal electrode system was investigated by impedance spectroscopy and two-probe d.c. conductivity measurement. Electrode conductivity in anodic direction varies with $P_W^{1/2}$( and that in cathodic direction with $P_{O2}^{1/4}$ in oxidizing atmosphere. In hydrogen atmosphere, the addition of water vapor increased the electrode conductivity both in anodic and cathodic direction. Increasing dopant concentration from 5 to 10% showed a more than four times increase in anodic conduction as well as bulk conduction of the solid electrolyte. This observation implies that unfilled oxygen vacancy concentration increases rapidly as the dopant content increases in humid atmosphere. The activation energy of cathodic conduction in Pt and Ag electrode was nearly same below $800^{\circ}C$ which means the rate of cathodic reaction is determined by the reaction in the electrolyte surface rather than on the metal electrodes.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.40-50
• /
• 2019

The aim of this study was to investigate the effects of density, temperature, size, and grain direction on measurement of moisture contents (MC) of wood materials non-destructively. The MC of different sizes of solid wood, glulam, and CLT from larch (larix kaempferi, $560kg/m^3$) and pine (pinus koraiensis, $430kg/m^3$) were measured using the dielectric type and resistance type meters. The specimens were conditioned in the environmental chamber to be equilibrium moisture content (EMC) of 12 % and 19 %. When density setting in dielectric type meter was increased from $400kg/m^3$ to $600kg/m^3$, the MCs of specimen (S-L-100-E) were decreased from 13.4 % to 11.3 %. However, when wood group (WG) setting in resistance type meter was changed from WG1 to WG4, the measured MCs were increased from 9.2 % to 12.3 %. When temperature setting in resistance type meters was changed from 0 to $35^{\circ}C$, the MC was decreased from 17.0 % to 13.0 %. The MCs measured by dielectric type meter for larger specimens (S-L-100-E_11.3 %, G-L-240-E_11.7 % and C-L-120-E_12.8 %) were higher than those of small size specimens (S-L-30-E_8.7 %, G-L-150-E_10.3 %, and C-L-90-E_9.7 %). The MCs measured by resistance type meter for larger specimens (G-L-240-E_11.6 % and C-L-120-E_13.3 %) were also higher than those of small size specimens (G-L-150-E_10.4 %, and C-L-90-E_11.8 %). The resistance type meter was not affected by the grain direction but the dielectric type meter were affected by the grain direction. The MC measured by resistance type meter for G-L-120-E perpendicular to grain direction was 11.5 % and the measured MC parallel to grain direction was 11.3 %. The MC measured by dielectric type meter parallel to grain direction (12.1 %) was higher than that measured perpendicular to grain direction (10.7 %).

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1267-1267
• /
• 2001

The existing fruit sorter has the method of tilting tray and extracting fruits by the action of solenoid or springs. In peaches, the most sort processing is supported by man because the sorter make fatal damage to peaches. In order to sustain commodity and quality of peach non-destructive, non-contact and real time based sorter was needed. This study was performed to develop peach sorter using near-infrared spectroscopy in real time and nondestructively. The prototype was developed to decrease internal and external damage of peach caused by the sorter, which had a way of extracting tray with it. To decrease positioning error of measuring sugar contents in peaches, fiber optic with two direction diverged was developed and attached to the prototype. The program for sorting and operating the prototype was developed using visual basic 6.0 language to measure several quality index such as chlorophyll, some defect, sugar contents. The all sorting result was saved to return farmers for being index of good quality production. Using the prototype, program and MLR(multiple linear regression) model, it was possible to estimate sugar content of peaches with the determination coefficient of 0.71 and SEC of 0.42bx using 16 wavelengths. The developed MLR model had determination coefficient of 0.69, and SEP of 0.49bx, it was better result than single point measurement of 1999's. The peach sweetness grading system based on NIR reflectance method, which consists of photodiode-array sensor, quartz-halogen lamp and fiber optic diverged two bundles for transmitting the light and detecting the reflected light, was developed and evaluated. It was possible to predict the soluble solid contents of peaches in real time and nondestructively using the system which had the accuracy of 91 percentage and the capacity of 7,200 peaches per an hour for grading 2 classes by sugar contents. Draining is one of important factors for production peaches having good qualities. The reason why one farm's product belows others could be estimated for bad draining, over-much nitrogen fertilizer, soil characteristics, etc. After this, the report saved by the peach grading system will have to be good materials to farmers for production high quality peaches. They could share the result or compare with others and diagnose their cultural practice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.156-160
• /
• 2005

We studied the effect of SMP (solid matrix priming) treatment, seed pretreatment for germination enhancement, to tobacco seeds by measurement of germination rate and contents of fatty acid, energy source for tobacco germination. The results were as follows. In result of germination test, germinative ability was the highest in KF109 at nine day treatment and in KB108 at seven day treatment. The composition of fatty acid in tobacco seed confirmed by gas chromatography were palmitic acid, stearic acid, oleic acid+elaidic acid, linoleic acid+linole­laidic acid, and $\alpha-linolenic$ acid. Palmitic acid, stearic acid, oleic acid and elaidic acid, and linoleic acid and linole-laidic acid were highest in KF109 at eight or nine day treatment and in KB108 at six or seven day treatment. Especially, content of oleic acid + elaidic acid, and linoleic acid+linolelaidic acid were changed largely by treatment, so these might be used for index to examine treatment effect.

• Applied Biological Chemistry
• /
• v.28 no.2
• /
• pp.56-61
• /
• 1985

The mass balances of calcium salts during the manufacturing processes of Tofu were established by conductometric method and chemical analysis method. During the manufacturing processes of soy milk and Tofu, 66% of solid and 63% of calcium was transfered from soy-bean to the soy milk, and 47.8% of total solid from soybean was transfered to the Tofu, respectively. When the $CaCl_2$ was used as coagulant, calcium contents in Tofu $(Y_{Tofu},\;mg{\cdot}Ca/g{\cdot}Tofu,\;wet\;basis)$ and drained solution $(Y_{drained\;soln},\;mg{\cdot}Ca/ml{\cdot}drained\;soln.)$ were linearly increased with the amounts of $CaCl_2(C,g{\cdot}CaCl_2/ml{\cdot}soy\;milk)$ added in soy milk, and correlative equations between them were obtained as $Y_{Tofu}=0.3369\;C+1.2689$ for Tofu$(moisture\;content:\;81.5{\pm}0.5%)$ with r=0.9898, and $Y_{drained\;soln}= 0.2899C+0.0399$ for drained solution with r= 0.9991. It was proved that conductometric method was reasonably applicable to the measurement of calcium contents of the products from every processes of Tofu manufacture except soy-bean. However the conductometric method was not recomendable in the case of $CaSO_4$ as coagulant due to its low solubility ana uneven distribution in soy milk and Tofu tissue.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.245-250
• /
• 2012

Branched polypropylenes (PP) with long chain branch were prepared by solid state reaction with three different branching agent of 0.3 wt% content. The chemical structures, non-isothermal crystallization behavior and complex viscosity of the branched PP were investigated by FTIR, DSC, optical microscope, and dynamic rheological measurement. The chemical structure of the branched PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no distinct change in melting temperature in case of PP-D-0-3 and PP-F-0-3, but PP-H-0-3 indicated a decrease in melting temperature. The decrease in melting temperature was interpreted by the fact that the degradation reaction of PP was more dominant than branched reaction, and confirmed by a decrease in complex viscosity. The non-isothermal crystallization behavior of the branched PP was analyzed using by Avrami equation. The Avrami exponent of PP was 3, and the values of the branched PP with DVB and FS were below 3. The activation energy of PP calculated by Kissinger method was 25 kJ/mol, and there were no big difference in activation energies of the branched PPs compared to PP.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3357-3362
• /
• 2016

Purpose: To correlate ultrasonographic (US) features of medullary thyroid carcinoma (MTC) with preoperative and post-operative calcitonin levels. Materials and Methods: A total of 130 thyroid nodules diagnosed as MTC were evaluated. Two radiologists retrospectively evaluated preoperative US features according to size, shape, margin, echogenicity, type of calcification, and lymph node status. Postoperative clinical and imaging follow-up (mean duration $31.9 {\pm} 22.5$ months) was performed for detection of tumor recurrence. US features, presence of LN metastasis, and tumor recurrence were compared between MTC nodules with and without elevated preoperative calcitonin (>100 pg/mL). Those with normalized and non-normalized postoperative calcitonin levels groups were also compared. Results: Common US features of MTCs were solid internal content (90.8%), irregular shape (44.6%), circumscribed margin (46.2%), and hypoechogenicity (56.2%). Comparing MTC nodules with and without elevated preoperative calcitonin levels, the size and shape of MTC nodule and lymph node metastasis showed statistical significance (p<0.05). Postoperative calcitonin normalization correlated with US features of tumor size (p=0.002), margin (p=0.034), shape ($p{\leq}0.001$), and presence of calcification (p=0.046). Tumor recurrence and LN metastasis were more prevalent in patients without normalization of postoperative calcitonin than in those with normalization (p=0.001). Conclusions: Serum calcitonin measurement is helpful for early diagnosis and predicting prognosis. Postoperative calcitonin measurement is also important for postoperative US follow up, especially in cases with larger nodule size, presence of calcification, irregular shape, and irregular margin.